CYSPO Technology Shenzhen Co Ltd LS1 Power Bank Magsafe Wireless Charger User Guide
- June 1, 2024
- CYSPO Technology Shenzhen Co Ltd
Table of Contents
CYSPO Technology Shenzhen Co Ltd LS1 Power Bank Magsafe Wireless Charger
Product Information
- Specifications
- Input Interface: USB-C
- USB-C Input: 5V 3A / 9V 2A
- USB-C Output: 5V 2A
- Wireless Charging Output: 15W Max
- Rated Capacity: 3100mAh (5V 2A)
- Battery Capacity: 5000mAh
- Model: LS1 Power Bank Magsafe Wireless Charger
- Input Interface: USB-C
- USB-C Input: 5V 3A / 9V 2A
- USB-C Output: 5V 2A
- Wireless Charging Output: 15W Max
- Rated Capacity: 3100mAh (5V 2A)
- Battery Capacity: 5000mAh
Product Usage Instructions
- Charging the Power Bank Magsafe Wireless Charger
- Connect the USB-C input to a power source using the provided cable.
- The battery indicator light will show the charging status: 75%-100%, 50%-75%, 25%-50%, and 0%-25%.
- To turn on the battery indicator light switch, click once. Double-click to turn it off.
- Using the Wireless Charging Feature
- Place your device on the Magnetic Charging Area of the Power Bank MagSafe.
- Ensure the device is aligned properly for charging.
- The Wireless Charging Output provides a maximum of 15W.
- Charging External Devices
- Connect your device to the USB-C output port using a compatible cable.
- The USB-C output provides a power output of 5V 2A.
FAQs
- Q: What should I do if the battery indicator light does not turn on?
- A: Try charging the power bank using a different power source. If the issue persists, contact customer support for assistance.
- Q: Can I charge multiple devices simultaneously?
- A: Yes, you can charge one device wirelessly on the Magnetic Charging Area and another device via the USB-C output simultaneously.
OVERVIEW
CHARGING
LED INDICATOR
WARNING
Specifications
- Input Interface: USB-C
- USB-C Input: 5V 3A / 9V 2A
- USB-C Output: 5V 2A
- Wireless Charging Output: 15W Max
- Rated Capacity: 3100mAh (5V 2A)\
- Battery Capacity: 5000mAh
FCC
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. The
device has been evaluated to meet general RF exposure requirements. The device
can be used in portable exposure without restriction.
Model: LS1 Power Bank Magsafe Wireless Charger
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>