RS PRO TC Wall Port with Integral Fine Wire Probe Installation Guide
- June 10, 2024
- RS PRO
Table of Contents
RS PRO TC Wall Port with Integral Fine Wire Probe
Product Information
The TC Wall Port with Integral Fine Wire is a device that allows for temperature monitoring of an object using a thermocouple thermometer. The device includes a probe sensor that can be attached to the object being monitored using a TAPS adhesive pad or similar tape. The probe wire can then be connected to the TC Wall Port, which can be fixed to a wall using the slotted screw holes provided. The device also includes a face plate that can be fixed to the back plate using the screws provided.
The TC Wall Port is available in different models, including the Thermocouple Wall Port with Integral Fine Wire Probe (1m), Thermocouple Wall Port for use with External Probes, Double Thermocouple Wall Port with Integral Fine Wire Probes (1m), Coiled Connection Cable 1m Length, Thermocouple Legionella Thermometer, Thermocouple Logging Thermometer, and Thermocouple Barcode Scanning Logging Thermometer.
Product Usage Instructions
- Attach the probe sensor to the object you wish to monitor using a TAPS adhesive pad or similar tape.
- Run the probe wire back to the TC Wall Port and fix the back panel to the wall using the slotted screw holes provided.
- Fix the face plate to the back plate using the screws provided.
- Connect your thermocouple thermometer with a coiled connection lead to the TC Wall Port to get a quick and accurate temperature reading.
INSTALLATION INSTRUCTION
The TC Wall Port is now available in both single and dual-input versions. In
order to make installation even easier, these products are also now available
with integral fine wire probes which can be supplied in lengths ranging from 1
– 20m. To install, firstly position your TC Wall Port at a convenient location
which is within easy reach. The integral fine wire probe for the Single input
TC Wall Port can be positioned to exit either from the side or the rear of the
Wall Port. This allows for the user to monitor pipework or other surfaces
which are direct behinf the TC Wall Port if required. The integral fine wire
probe for the Dual Input TC Wall Port can exit from the rear or any of the
channels.
Attach the probe sensor to the object you wish to monitor using a TAPS adhesive pad or similar tape. Run the probe wire back to the TC Wall Port and fix the back panel to the wall using the slotted screw holes provided.
Now fix the face plate to the back plate using the screws provided.
The TC Wall Port is now ready for use. Connect your thermocouple thermometer
with a coiled connection lead to get a quick and accurate temperature reading
.
Parts List
Parts List
Allied Part Number| RS Part Number| Description
TCWALL-KA01- 01| 219-5354| Thermocouple Wall Port with Integral Fine Wire
Probe (1m)
TCWALLPORT| 788-7129| Thermocouple Wall Port for use with External Probes
TCWALLPORT-D- KA01-01| 219-5355| Double Thermocouple Wall Port with Integral
Fine Wire Probes
(1m)
KMPC1MP| 788-7122| Coiled Connection Cable 1m Length
MM2008| 204-8413| Thermocouple Legionella Thermometer
MM7010| 204-8412| Thermocouple Logging Thermometer
MM7000-2D| 204-8411| Thermocouple Barcode Scanning Logging Thermometer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>