LISNE P601 Magnetic Wireless Charging Power Bank User Manual
- September 26, 2024
- LISNE
Table of Contents
LISNE P601 Magnetic Wireless Charging Power Bank
Product Information
Specifications
- Product Name: LISEN P601 Magnetic Wireless Charging Power Bank
- Capacity: 38.7WH
- Wireless Charging: Yes
- RF Exposure Compliance: General RF exposure requirement met
Product Usage Instructions
Charging:
- Connect the power bank to a power source using the provided cable.
- To charge wirelessly, place your Qi-enabled device on top of the power bank where indicated.
- Ensure proper alignment for efficient charging.
Using the Power Bank:
- To power on the power bank, press the power button if available.
- Connect your device to the power bank using a compatible cable for wired charging.
- If using wireless charging, place your device on top of the power bank as instructed.
FAQ
Frequently Asked Questions
- Q: Is this power bank compatible with all devices?
- A: The power bank is compatible with most Qi-enabled devices for wireless charging. For wired charging, it is compatible with devices that use standard USB or USB-C cables.
- Q: How can I check the battery level of the power bank?
- A: Some models may have LED indicators to display the remaining battery level. You can also check the battery level on your connected device if applicable.
ACCESSORY LIST
PRODUCT OVERVIEW
CHARGING INSTRUCTION
POWER SWITCH GUIDE
- To Activate: Press 1 time
- To Deactivate: Press 2 times
Low Power Charge Mode:
- While the power bank is on, press and hold the power switch for 2 seconds to activate this mode.
- The LED indicators will sequentially light up in a marquee pattern. The device will automatically stop charging after 2 hours.
To return to Normal Charge Mode:
- Press and hold the power switch for 2 seconds. The LED indicators will stay lit, signaling that Normal Charge Mode is active.
WIRELESS CHAGRING GUIDE
When the device is powered on, simply place your phone on the wireless charging area. Charging will begin automatically.
CHARGE THROUGH CABLE
POWERBANK RECHARGE
PRODUCT PARAMETER
- NAME OF PRODUCT
- LISEN P601 Magnetic Wireless Charging Power Bank
- MODEL
- 2E422
- USB-C INPUT
- 5A 3A 9A 2A
- USB-C OUTPUT
- 5V 2A 9V 2A
- 10V 2.25A
- WIRELESS CHARGING OUTPUT
- 5W / 7.5W / 10W / UP TO 15W
- USB-C + WIRELESS CHARGING
- 10W+5W
- OUTPUT WATTAGE
- UP TO 22.5W
- BATTERY CAPACITY
- 10000MAH / 3.87V / 38.7WH
- RATE CAPACITY
- 6000MAH (5V 2A)
- BATTERY TYPE
- LITHIUM POLYMER CELL
- CONVERSION EFFICIENCY
- ≥60%
- CHARGE LIMIT VOLTAGE
- 4.45V
- OPERATING TEMPERATURE
- 0~35°C
PRACTICES TO AVOID
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in portable exposure condition without restriction.
More Information
NOTES
- Please use the original or certified charging cables.
- Avoid using the product in environments with extremely high or low temperatures.
- Avoid contact with liquids.
- Prevent the product from dropping, being squeezed, or impacted.
- Do not throw the product into fire.
- Keep the product out of reach of children.
- Cease using the power bank if it becomes submerged in water.
- Stop using the power bank if it emits an odor, becomes deformed, or overheats.
- Do not expose the product to fire or temperatures above 100° C (212° F) as it may cause explosions.
- Do not damage or puncture the power bank’s casing. Damage to the casing can lead to overheating, fire, or explosion.
- Do not disassemble this product. For repairs or maintenance, please take it to qualified service personnel. Incorrect reassembly could pose a risk of fire or personal injury.
- Unplug the charger after the power bank is fully charged to prevent battery damage. Turn off the power bank when not in use for extended periods.
- Exercise close supervision when using the product near children to reduce the risk of injury.
- Do not use magnetic suction wireless charging if there are metal plates, finger rings, or credit cards on the back of the phone or phone case.
- The product may heat up noticeably when watching videos or playing music on your phone during wireless charging, which can also significantly slow down the charging process.
- Minor heating is normal during wireless charging. Contact our customer service via email if severe heating occurs.
Video QSG
Experience innovation for work,play,and travel.
Since 2013,LISEN designs tech accessories
We specialize in the conception, manufacturing and distribution of 3C and
mobile phone accessories products tailored.
USE TUTORIAL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>