PUNKWOLF D68F Punk Wolf Bluetooth Speakers Instruction Manual

PUNKWOLF D68F Punk Wolf Bluetooth Speakers

Parameter data

• Product name; LEO Portable 81uetooth Speaker
• Model name: 068 F
• Bluetooth version: S.3
• The horn: S7MM
• Bluetooth distance: Ma>1 4001nch
• Battery capacity: 1 200mAh
• Playing time: Max 10 hours (without light)
• Charging time: 3 hours
• Charging input: SV/1A
• Output power: S watts

Product Operating Instructions

1.  After the speaker is turned on by pressing ·o· for 2 seconds, you will hear the boot prompt tone, the U:O light of the speaker will light up, and enter the pairing mode,
2. Turn on the 81uetooth de111ice and search for, Bluetooth devices, and find “068F” in the Bluetooth device list. After the connection is successful. the speaker will emit a prompt tone. and the colored lights will move back .lnd forth.
3. In subsequent use, as long as the 81uetooth of the mobile device is turned on, it can be connected automatically

Buttons and Functions

• Key (1):button: Power button long press the power button for 2 seconds to turn on/off; short press
• Key (2):volume•/previous song
• Key (3): volume + neKt song
• Key (4): light switch

Shutdown

When the speaker is not in use. press and hold the ·o’ button to turn it off to prevent power loss, low battery alarm and automatic shutdown function:when the battery is lower than 20%, the .speaker will emit a low power prompt sound, and you should call the speaker in time Charging, when the power is tower than 10%, the speaker will automatically shut down.

TWS mode

1. Two D68F devices need to be turned on at the same time
2. Press· · four times and hear the beep ·rws ON” to sort TWS pairing
3. When the beep sound deng deng·. the TWS pairing is completed

Bluetooth mode

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. (2) this device must accept any interference recerved, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residenbal installation. This equipment generates uses and can radiate radio frequency energy and, i nol installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence mi not occur in a parocu ar instalation. I this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>