koineet 1.7 Inch Touch Screen Fitness Tracker Smart Watch User Manual
- June 10, 2024
- koineet
Table of Contents
koineet 1.7 Inch Touch Screen Fitness Tracker Smart Watch
Watch client download
Scan the QR code to download and install the watch client or search for the “Da Fit” download installation.
Introduction to the whole machine
The watch is charged and activated
Before you use the watch for the firs time, you need to charge to activate the metal point attached to the back of the watch using the equipped magnetic suction charging cable, and at the other end of the charging cable you can connect to the USB charging head or computer USB port.
Connect the watch
This watch dual Bluetooth call watch, if you want to use the watch properly need to connect two Bluetooth (APP-side Bluetooth and mobile phone end (audio) Bluetooth)
- APP-end connection (for data transfer)
Open the APP and click “Binding Watch” to find the watch you need o to connect
to. If more than one device is nearby, please filter according to the MAC
address of the watch, the connection is successful as follows:
Note: Audio does not turn on when the watch is low on.
- Mobile phone connection (for calls)
1) Turn on the audio switch of the watch: swipe down in the main
interface of the watch, enter the control center, tap the audio switch icon,
turn on the audio status as shown:
2) Go to the mobile Phone Bluetooth search page, search and connect the
hand table, the connection is successful as shown:
After the watch is successfully bound, each time the client is opened in the future, the watch will automatically connect to the phone and the data can be synchronized by pulling down on the client data page.
Introduction to the call function
When your watch is connected to your phone, you can use your watch to dial-
control your phone to make calls, or you can answer calls from your phone on
your watch. You can also view your watch’s call history.
When using the call function, you need to make sure that your watch is
connected to your phone in a stable state.
Watch operating instructions
The list of features Note: Click on the icon to jump directly into the corresponding function, click on the middle clock icon to jump directly to the table page
Introduction to the function of the watch
Music control
While connected, the watch can control the phone music player.
body temperature
Click on the body temperature interface to measure the current body
temperature. More detailed analysis and data records can be viewed in the
client.
Motion information
The watch records and displays the number of steps you walk each day, the
calories burned, and mileage information. More detailed analysis and data
records can be viewed in the client.
Sleep
Your watch can record and show the total length of your sleep last night and
the length of your deep and light sleep. More detailed analysis and data
records can be viewed in the client.
Heart rate
The watch can record and display a heart rate of 24h throughout the day. Click
on the heart rate interface to measure the current heart rate. More detailed
analysis and data records can be viewed in the client.
Blood pressure
Click on the blood pressure interface to measure the current blood pressure
value. More detailed analysis and data records can be viewed in the client.
Blood oxygen
Click on the oxygen interface to measure the current oxygen value. More
detailed analysis and data records can be viewed in the client.
Weather information
The weather page shows the current weather, air quality information, and
tomorrow’s conditions. Weather information needs to be connected to the client
before data can be obtained, and weather information cannot be updated if
disconnected for a long time.
Exercise
8 sports modes to choose from, including: walking, running, cycling,
basketball, football, badminton, skipping rope, swimming. More detailed
analysis and data records can be viewed in the client.
Message push
The watch can receive notifications on the display phone, and you can set push
items on and off in the client.
Camera control
When the phone is connected, the watch can be used as a remote control for the
phone’s camera. When you turn on the camera on your phone, you can trigger the
phone’s camera door by tapping on the watch camera control page.
Other features
Other functions of the watch include stopwatch, alarm clock, timer, brightness
adjustment, vibration switch, do not disturb mode, cinema mode, factory
resumption, shutdown, about.
Precautions
- do not use charging voltage greater than SV, charging current greater than 2A adapter, charging time of 2-3 hours.
- Do not charge with water stains.
- this product is an electronic monitoring product, not as a medical reference, measurement data for reference only.