SASWELL T11FHL Heated Floor Thermostat User Manual

SASWELL T11FHL Heated Floor Thermostat

It’s very important to read the whole user manual.

User manual

Thermostat T11FHL-0(N) is intended to be used in systems for electrical floor heating. Use of this thermostat is very simple and for output indication it uses LED indicator. The user manual is a part of the general terms and conditions of sale. We reserve the right to change the details, technology and performance. The guarantee is valid only with the sales invoice. We allow the possibility of errors in the text.

Important notes before first use, installation and maintenance

Before use, carefully read the manual not only for the thermostat, but also for the Heating device (heat pump, pumps, boilers, etc.)

• Turn off the power supply before installing the thermostat!
• We recommend that the installation is done by a qualified electrician
• the electrical circuit must be secured with a fuse that does not exceed the current load of wiring
• Please note all safety instructions before installing
• Do not expose the product to direct sunlight, extreme cold, humidity and sudden temperature changes. This would reduce the accuracy of the temperature measurement
• Do not place the product in places that are prone to vibrations and shocks – this can cause damage
• Do not expose the product to excessive pressure, shock, dust, high temperatures or moisture, as these can cause damage to one of the functions product, shorter energy endurance, damage to batteries, and deformation of plastic parts.
• Do not expose the product to rain or moisture, dripping or spraying water.
• Do not place any sources of fire on the product, for example, spark plugs etc.
• Do not place the product in places where there is insufficient air circulation.
• Do not insert any objects into the ventilation openings.
• Do not interfere with the internal electrical wiring of the product. It may be damaged and therefore terminate the warranty. The product must only be repaired by a trained specialist.
• Use a moderately moistened cloth for cleaning. Do not use solutions or cleaning products – may damage plastic parts and electrical wiring
• Do not immerse the product in water or other liquids.
• Do not repair it yourself if the product is damaged or defective. Put it in the repair shop where you bought it
• The product should not be used by a person (including children) by a physical, sensory or mental disability or lack of experience and knowledge impeded by the safe use of the device if they are not controlled, or if they were not informed by the person responsible for their safety about the use of the device
• Children’s control is necessary to ensure that they do not play with the device. A declaration of conformity has been issued for the product. This and other documentation are available on the website
  www.sen-controls.eu and it’s subsites eg. https://en.sen-controls.eu under legal, documents or downloads, manuals. The documentation can also be delivered on request via email on info@sen- controls.eu. The producer of this product is SASWELL CONTROLS (HONGKONG) LTD. 3/F Building A,East 8th Region, Shangxue Industry & Science Park, Buji town, Shenzhen City, Guangdong, China. Importer in EU for Saswell is Sen Controls d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia

Product overview

LED indicator description

• Red LED – When red, thermostat is working and heating output is on
• Red blinking LED – Sensor is in short circuit, damaged, not installed properly or not installed
• Green LED – FP function is turned on – the thermostat is working over an external timer
• Yellow LED – Simultaneous output via thermostat and external timer

Installation

1. Remove the big button then use a straight screwdriver and remove the thermostats »window« case.
2. Do the electrical installation. This part should be done by a qualified electrician or personel. For electrical wiring schemes look at page 2
3. Install the thermostat in to the electrical socket of standard 60mm dimensions.
4. Install the »window« case back and then 5. the button.
   • When installing the button back in place, turn the potentiometer completely to left so it will be easier to install the button back in place.
   • Before installing the button you can set the set heating limitation by using those plastic limiters and put them in place with the screw.

Warranty Statement

Warning: The contents of these instructions can be changed without prior warning – due to limited printing options, the symbols presented may vary slightly from the on-screen symbols – the contents of these instructions cannot be reproduced without the consent of the manufacturer. The device can be freely used in the EU. All statements of conformity (CE, RoHS) are freely available on the website www.sen-controls.eu and it’s subsites eg. https://en .sen-controls.eu or other. The documents are also available on products subsites under “Documents” or “Legal”, or on request via email info@sen- controls.eu.

1. We declare that we guarantee the properties and faultless operation within the warranty period.
2. The warranty period begins with the date of purchase and is valid for 24 months.
3. Sen Controls d.o.o. guarantees to the buyer that during the warranty period we will eliminate all defects on the device due to a factory failure in material or workmanship at our own expense.
4. For the time of repair, the warranty period is extended.
5. If the device is not repaired within 45 days from the date of the failure report, the affected party may request a new one.
6. The guarantee is terminated if the defect occurred due to: – Unprofessional-unauthorized service, – Opening or modifying the device without the manufacturers, – Failure to comply with the user manual
7. The guarantee does not exclude the rights of the consumer arising from the seller’s responsibility for defects in goods.
8. The manufacturer provides repairs, maintenance of goods, spare parts and couplings against payment for three years after the expiration of the warranty period.
9. The natural wear of the device is excluded from the warranty. The same applies to damage due to improper use or overload. 10. The limited warranty applies in the territory of the EU Member States and the Republic of Serbia, Bosnia and Herzegovina.

WARRANTY CARD AND INSTRUCTIONS FOR THE RECLAMATION PROCEDURE

The owner invokes a guarantee claim by declaring the impairment to an authorized workshop, repairer, point of sale, either in writing or orally. The buyer is responsible if he causes damage to the appliance by late notification. Upon expiration of the warranty period, the right to claim a warranty claim has expired. The validated warranty card with the original invoice must be attached. Sen Controls d.o.o. undertake to replace the device with a new one if it fails to function properly in this warranty period. Please add a detailed explanation of the error of the device, along with a properly completed warranty card.

SIGNATURE AND STAMP

OF THE SELLER

|

Import and service for EU is Sen Controls d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia, tel.: +386 40 299 299 www.sen-controls.eu | info@sen-controls.eu If you have any questions or problems with our products, contact us on help@sen- controls.eu.

References

• Index English - controls.eu
• Sen Controls d.o.o. – Saswell thermostats – Grelci in Saswell termostati za regulacijo ogrevanja
• Sen Controls d.o.o. – Nadzor ogrevanja in tople sanitarne vode v vašem domu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>