SUNGROW SG25CX-P2 PV Grid Connected Inverter Installation Guide
- June 10, 2024
- SUNGROW
Table of Contents
SUNGROW SG25CX-P2 PV Grid Connected Inverter
- ontents may be periodically updated or revised due to product development. The information in this guide is subject to change without notice. In no case shall this guide substitute for the user manual or related notes on the device.
- Make sure to read over, fully understand and strictly follow the detailed instructions of the user manual and other related regulations. Visit http://www.sungrowpower.com/, choose “PV Inverters” and search for the device model on the”Products” tab page to view or obtain the user manual.
- All operations can be performed only by qualified personnel, that must be trained in the installation and commissioning of the electrical system, as well as the dealing with hazards, have knowledge of the manual and of the local regulations and directives.
- Before installation, check that the package contents are intact and complete against the packing list. Contact SUNGROW or the distributor in case of any damaged or missing components.
- The cable must be intact and well insulated. Operation personnel must wear proper personal protective equipment (PPE) all the time.
- Any violation could result in personal death or injury or device damage, and will void the warranty.
Safety
- Please follow the safety instructions related to the PV strings and the utility grid. Otherwise, SUNGROW shall not be held liable for any damage caused.
DANGER
Lethal voltage!
- PV strings will produce electrical power when exposed to sunlight and can cause a lethal voltage and an electric shock.
- Only qualified personnel can perform the wiring of the PV panels.
- All electrical connections must be in accordance with local and national standards.
- Only with the permission of the utility grid, the inverter can be connected to the utility grid.
- Do not open the enclosure at any time. Unauthorized opening will void guarantee and warranty claims and in most cases terminate the operating license.
- When the enclosure lid is removed, live components can be touched which can result in death or serious injury due to electric shock.
WARNING
- All the warning labels and nameplate on the inverter body must be clearly visible and not be removed, covered or pasted. & CAUTION
- Risk of burns due to hot components!
- Do not touch any hot parts (such as heat sinks) during operation. Only the DC switch can safely be touched at any time. & NOTICE
- Only qualified personnel can perform the country setting.
- Unauthorized alteration of the country setting may cause a breach of the type-certificate marking.
The symbols on the inverter body are as follows.
- Disconnect the inverter from all the external power sources before service!
- Danger to life due to high voltages!
- Do not touch live parts for 15 minutes after disconnection from the power sources.
- Only qualified personnel can open and maintain the inverter.
Scope of Delivery
- The images shown here are for reference.
- The actual product and quantity are based on delivery.
Mounting location
Please consult SUNGROW before tilting backwards the inverter and install it in floating power plants.
Dimensions
Mounting
PE Connection
AC Connection (For a multi-core cable)
DC Connection
EyeM4 Connection (optional)
WiNet-S Connection (optional)
Installation with WLAN communication
Installation with Ethernet communication
COM2 ( DI , ORM, DO , RS485, Meter )
COM2 Connection (DI, DO, RS485, Meter)
Take meter Connection as an example.
Inverter parallel
Maximum 30 hybrid inverters with the same type can be connected in parallel
.
COM2 Connection (ORM)
Power on
LED Indicator
More information in the QR code or athttp://support.sungrowpower.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>