Solutions MS-C01 Ceiling Mount Installation Guide
- June 10, 2024
- Solutions
Table of Contents
Installation Guide
MS-C01 Ceiling Mount
What’s Included
| Pieces | Item |
|---|---|
| 1 | Ceiling Mount |
| 1 | Cross recessed, pan head with tail machine teeth screw, UNC 1/4’’-20*8 |
| 6 | Pan head, flat tail, self-tapping lock screws, M3*6 |
Not Included
| Pieces | Item |
|---|---|
| 4 | *M5 Expansion screws |
- These screws need to be provided by the installer based on the thickness of the ceiling.
Caution: It is the responsibility of the installer to ensure the camera and its mounting hardware are firmly secured, so that the camera does not fall. Anchoring hardware appropriate to the wall type must be selected and provided by the installer.
Installation
Step 1.
a) Position upper component of anchor on ceiling, and mark ceiling for
placement (markers indicated in steps 2 and 4).
b) Pre-drill holes in ceiling.
NOTE: Check depth of the mounting holes by inserting a straw or
toothpick, and measure against the length of screws.
Step 2.
a) Please top component of mount back over marking on ceiling.
b) Secure using M5 expansion screws (not included).
Step 3.
Secure bottom component of mount to the bottom of the camera, using included
M36 screws. Step 4.
a) Attach camera to mount.
b) Secure using M36.
www.m4sol.com
support@m4spl.com|
www.m4sol.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>