Schneider Electric GEX7454201 Spacial CRN Plain Door User Guide
- June 10, 2024
- Schneider Electric
Table of Contents
Schneider Electric GEX7454201 Spacial CRN Plain Door
Product Information
- The product is called Spacial CRN.
- The product has a diameter of 8mm.
- The product includes M5, M6, and M8 screws with respective torque values of 2 Nm, 5 Nm, and 15 Nm.
- The product is designed to be used with various structural accessories such as S-1, S-2, S-3, S-4, NSYTJ, NSYPFCR, NSYSPF, NSYCOCN80, NSYMB, NSYMM, NSYMS, NSYMF, NSYMR, NSYPIN, NSYSDCR, NSYDLM, NSYDLCR, NSYDLA, NSYDLPLM, NSYVDM…P and NSYVDM…F.
- The product must be installed and used in compliance with prevailing standards and regulations.
Product Usage Instructions
- Always follow the instructions provided in the manual to ensure the proper functioning of the product.
- Failure to follow the instructions can result in injury or equipment damage.
- When using the product with structural accessories, refer to the list of possible combinations provided in the manual.
- Always confirm the information given in the publication as standards, specifications, and designs change from time to time.
CAUTION
- HAZARD OF EQUIPMENT DAMAGE
- Respect the information provided in the instruction to ensure the functioning of the product.
- Failure to follow these instructions can result in injury or equipment damage.
To maintain the same UL-type rating, all conduit fittings and other components
installed in openings made in the enclosure must have the same ratings, and
only wall-fixing bracket NSYPFCR may be used. When installed as a Type 2 or 3R
enclosure, drill a drain hole (3.2 – 6.4 mm (1/8 – ¼ in) diameter) in the
lowest part of the bottom wall.
It is the customer’s responsibility to fulfill the requirements of Section 19
(Openings) of UL508A Standard and Section 9.6 (Equipment openings)of UL50E
Standard.
Il est de la responsabilité du client de respeter les exigences de la section
19 (Openings) de la Norme UL508A et la section 9.6 (Equipment openings) de la
norme UL50E.
Tools
Installation Instructions
- H ≤ 1000 and W ≤ 800
- H ≤ 1000 et W ≤ 800
- H ≤ 1000 y W ≤ 800
- H ≥ 1200 and W ≤ 800
- H ≥ 1200 et W ≤ 800
- H ≥ 1200 y W ≤ 800
- H ≤ 1000 and W ≤ 800
- H ≤ 1000 et W ≤ 800
- H ≤ 1000 y W ≤ 800
- H ≥ 1200 or W ≥ 1000
- H ≥ 1200 ou W ≥ 1000
- H ≥ 1200 o W ≥ 1000
Dimensions
Accessories
Schneider Electric Industries SAS 35, rue Joseph Monier CS 30323 F – 92506 Rueil Malmaison Cedex www.schneider-electric.com.
This product must be installed, connected, and used in compliance with prevailing standards and/or installation regulations. As standards, specifications, and designs change from time to time, always ask for confirmation of the information given in this publication.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>