Newell M80 II Light Tent User Manual

M80 II Light Tent
User Manual PHOTO ACCESSORY
Newell M80 II light tent
OPERATING MANUAL

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.

1. Do not expose to water or moisture
2. Do not place the device near alcohol, gases or flammable liquids
3. Do not stare directly at the light source.
4. Do not touch the lamp diodes with your hands or other objects.
5. Keep the device and accessories out of the reach of children.
6. Using a power adapter other than the included one may damage the device.
7. When the product is not used for a long time, turn off the device and disconnect the power supply
8. The product should be transported folded.
9. If you find smoke or a strange smell coming from the device, immediately disconnect the power supply. If there are problems with the device, bring it to an authorized service center
10. Use a soft cloth and mild detergent for cleaning. Do not use strong cleaning agents.

FEATURES

1. The light source is made of high quality LED with high brightness, low power consumption and high CRI.
2. Design of aviation aluminum PCB makes fast dissipation to extend product’s life
3. It is easily assembled with two pieces LED boards, without dead corner and even light fill
4. It is made of high strength steel tube with baking varnish paint and easy to carry

PRODUCT PARTS

1. Power cord Inlet
2. Top cover(macro shooting)
3. Studio
4. Front large cap
5. Edge Velcro
6. Zipper
7. AM-in-one bag
8. Three-way connector
9. Power adapter
10. Connecting tube
11. Background plates (black, white, orange)
12. Brightness dimmer
13. LED boards
14. Diffusers

INSTALLATION

1. Connect 8 pcs three-way connectors separately to steel cube connecting rod.
2. Unfold background plates, and Insert the ends of the unfold the material and insert into the slots separately to fix it.
3. The light board can be ratable 360 degree, so you could adjust It randomly In the box and fasten it on the rod according to your needs of light direction.
4. Place the box (step 1) on the material. Zip the studio tent along studio body to form the photo box as above picture
5. Insert the dimmer cable from the hole on top cover to connect the LED boards.
6. Plug in the power adapter. Pull the zipper on both sides to the bottom to form the mobile photo studio

USING

1. You can use camera or phone to shoot. You can use dimmer to adjust brightness. You can also use light diffuser to make light more soft.
2. You can use the top’s macro shooting.

SPECIFICATION

The manufacturer reserves the right to change the information contained in this manual without prior notice.

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packaging’s must not be placed with other household waste, They must be  handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty

Made in China, In China hergesteit,
Echo eon China Fabricator in Cinna,
Fabliau~ eon Chine, Vyrobeno v Cine,
Wyprodukowano w Chinch Centavo s ware

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>