Weller WXMPS MS Smart Tools Tweezers Instruction Manual

: June 10, 2024
: Weller

Table of Contents

Weller WXMPS MS Smart Tools Tweezers
Product Information
Product Usage Instructions
Safety Instruction
CONNECTION
CAUTIONS
SETUP
Specified Conditions Of Use
User groups
Care and maintenance
Temperature performance
Warranty
Symbols
Technical Data
EC declaration of conformity
Product Registration
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Weller WXMPS MS Smart Tools Tweezers

Weller-WXMPS-MS-Smart-Tools-Tweezers-product

Product Information

The product is a Weller WX Smart Soldering Station with various models, including WXMPS MS, WXUPS MS, WXMTS, and WXUTS. It comes with different tip types series, such as Pico, Ultra, Micro/Pico, RTMS MS, RTPS MS, RTUS MS, RTWMS, RTWPS, and RTWUS. The station is provided with a safety shelf and a power supply unit that varies based on the model.

Product Usage Instructions

Before operating the product, read the instruction manual carefully. The product is intended for use by trained professionals and technical personnel with adequate experience and knowledge. The product is not recommended for beginners or untrained users.
Usage Conditions: The product should be used in accordance with the specified conditions of use as stated in the manual. Failure to do so may result in damage to the product or injury to the user.
User Groups: The product is suitable for use by trained professionals, technicians, safety personnel, and technical apprentices under the supervision of a trained professional.
Care and Maintenance: It is important to maintain and care for the product regularly as instructed in the manual. Failure to do so may result in damage to the product or reduced performance.
Temperature Performance: The temperature performance of the product varies based on the model and tip type series used. Refer to the manual for specific temperature ranges and heating times.
Warranty: The product comes with a warranty that covers defects in materials and workmanship. Refer to the manual for further details.
Symbols: The product comes with symbols that indicate important safety information and instructions. Refer to the manual for further details.
Technical Data: The product has specific technical data, including tip type series, safety shelf, power supply unit, temperature ranges, and heating times. Refer to the manual for further details.

Safety Instruction

WARNING Electrical shock
Protect yourself against electric shocks. The handles on soldering tools with an antistatic design are conducive.

Avoid touching earthed objects such as pipes, heaters, cookers and refrigerators.
Do not use the soldering tool in a damp or wet environment.
Never work on voltage-carrying parts.

WARNING Risk of burns
The soldering tip becomes very hot during soldering work. There is a risk of burns from touching the tips. After the soldering process, the soldering tool and the workpiece holder are still hot.

Always place the soldering tool in the safety rest while not in use. Make sure the safety holder is stable.
Do not touch the hot soldering tips and keep them away from inflammable objects..
Only replace solder tips when cold
Only replace nozzles when cold

Risk of burning through liquid solder. Protect yourself against solder splashes.

Wear appropriate protective clothing to protect yourself against burns. Protect your eyes by wearing eye protection.
When working with adhesives, special attention must be paid to the warning information provided by the adhesive manufacturer.
Only connect the vacuum and hot air at the designated points.

Store your soldering tool in a safe place.
When not in use, units and tools should be stored in a dry, high or locked area out of the reach of children. Make sure that unused soldering tools are free of voltage and de-pressurized. Do not use the cable for purposes other than those for which it is intended. Never carry the unit by cable. Do not use the cable to pull the plug out of the socket. Protect the cable against heat, oil, and sharp edges.

Be alert.
Pay attention to what you are doing. Be smart when using the unit. Do not use the soldering tool if you are having difficulty concentrating.

Avoid abnormal posture.
Arrange your workstation in an ergonomically correct way. Avoid bad posture when using the unit, as this can lead to postural problems. The soldering tool must be operated only in perfect technical working order. Safety devices must not be deactivated.

Faults and defects must be repaired immediately.
Before using the unit/tool, safety devices must be carefully checked to make sure that they are functioning properly and in the manner intended. Check that moving parts are functioning properly and are not sticking, and whether parts are damaged. All parts must be correctly fitted and must satisfy all the requirements necessary to guarantee the trouble-free operation of the unit.

Use the correct tool.
Use only accessories or auxiliary devices which are included in the list of accessories or approved for use by the manufacturer. Use WELLER accessories or auxiliary devices on original WELLER equipment only. The use of other tools and other accessories can cause injury.

Secure the tool.
Use clamping fixtures to hold the workpiece.

Use a solder fume extraction unit.
If appliances for connecting solder fume extraction units are available, ensure that they are connected and used properly.

MORE INFORMATION

https://www.weller-tools.com/wxsmart

CONNECTION

$Weller-WXMPS-MS-Smart-Tools-Tweezers-fig- $2$$

CAUTIONS

$Weller-WXMPS-MS-Smart-Tools-Tweezers-fig- $3$$

SETUP

WXMPS MS
WXUPS MS $Weller-WXMPS-MS-Smart-Tools-Tweezers-fig- $4$$
WXMTS
WXUTS $Weller-WXMPS-MS-Smart-Tools-Tweezers-fig- $5$$

Specified Conditions Of Use

Use the soldering iron exclusively for the purpose indicated in the Operating Instructions of soldering and desoldering under the conditions specified here.
The soldering iron may only used in combination with Weller Supply Units.
This device may only be used at room temperature and indoors. Protect against moisture and direct sunlight.

User groups

Due to differing degrees of risk and potential hazards, several work steps may only be performed by trained experts.

Work step	User groups
Default soldering para- meters	Specialist personnel with technical training
Replacing electrical repla- cement parts	Electricians
Default maintenance intervals	Safety expert
Operation Filter change	Non-specialists

Operation Filter change

Replacing electrical repla-

cement parts

| Technical trainees under the guidance and supervision of a trained expert

Care and maintenance

WARNING
Before doing any work on the machine, pull the plug out of the socket. Leave the unit to cool down.

Check all connected cables and hoses on a regular basis. If power tools are damaged, they must be immediately removed from use.
Do not use blocked nozzles.

Repairs must always be referred to a Weller-trained specialist.
Use original replacement parts only.

WARNING Risk of burns
Only replace the soldering tips when they are cold.

The soldering tool must be left switched off in the safety rest for at least 3 minutes until the soldering tip has cooled down. The LED status indicator must be at „OFF“.

Temperature performance

The soldering tool has an internal usage sensor that can be used to set an automatic switch-off function (Stand-by). The settings can be found in the station’s operating instructions.

Warranty

Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the buyer. This does not apply to claims by the buyer for indemnification in accordance with §§ 478, 479 BGB (German Federal Law Gazette).

We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty has been furnished by use in writing and using the term „Warranty“. The warranty shall be void if the damage is due to improper use and if the device has been tampered with by unauthorized persons.

For more information please visit www.weller-tools.com.

Symbols

Caution!
Warning! Risk of burns!
Read the operating instructions!
Before performing work of any kind on the unit, always disconnect the power plug from the socket.
ESD-compatible design and ESD-compatible workstation
CE mark of conformity
British Conformity Mark
Disposal
Do not dispose of electric tools together with household waste material! In observance of European Directive, 2012/19/EU on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Disposal – UK
Do not dispose of electric tools together with household waste material! In observance of British Directive, 2013 No. 3113 on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.