Panasonic ET-RFV100 Projector Air Filter Instruction Manual
- June 10, 2024
- Panasonic
Table of Contents
Panasonic ET-RFV100 Projector Air Filter
Product Information
- Product Name : Replacement Filter Unit Commercial Use
- Model No.: ET-RFV100
- Manufacturer : Panasonic
- Packaged Quantity : 1
- Compatibility : Compatible with projectors
Product Usage Instructions
- Before replacing the air filter unit, turn off the power to the projector.
- Ensure that the projector is stable and work in an environment that is safe, even in the event of the air filter unit dropping.
- Do not operate the projector without the filters attached as dust may accumulate on the optical elements degrading picture quality.
- Do not put anything into the air vents as doing so may result in malfunction of the projector.
- Do not wash the filters with water or any other liquid matter as it may damage the filters.
- To replace the air filter units, turn over the projector and pull out the filter cover (bottom) and pull up the handle to take out the filter unit (bottom). Press up the latches and pull out the filter cover (side) and take out the filter unit (side).
- Put new filters back into position. Make sure that the filters are fully inserted into the projector.
- Reset the filter counter after replacing the filter.
Note : If a filter warning icon appears on the screen, replace the filter
immediately.
Thank you for purchasing this Panasonic product.
Please read these operating instructions and the projector operating
instructions carefully, and then use this product correctly. Please save these
Operating Instructions for future use.
Read this first!
Notes on replacing the air filter unit
- Turn off the power before you replace the air filter unit.
- When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even in the event of the air filter unit dropping.
- Do not operate the projector with the filters removed. Dust may accumulate on the optical elements degrading picture quality.
- Do not put anything into the air vents. Doing so may result in malfunction of the projector.
- Do not wash the filters with water or any other liquid matter. Otherwise the filters may be damaged
Replacing the air filter unit
Remove Air filter units
Filter prevents dust from accumulating on the optical elements inside the
projector. Should the filter become clogged with dust particles, it will
reduce cooling fans’ effectiveness and may result in internal heat buildup and
adversely affect the life of the projector. If a “Filter warning” icon appears
on the screen, replace the filters immediately.
Replacement of the air filter units
- Remove the air filter units.
- Turn over the projector and pull out the filter cover (bottom); pull up the handle and take out the filter unit (bottom.)
- Press up the latches and pull out the filter cover (side); pull out the handle and take out the filter unit (side).
- Replace the air filter units
- Put new filters back into the position. Make sure that the filters are fully inserted to the projector.
- Resetting the Filter Counter
- Be sure to reset the Filter counter after replacing the filter.
Panasonic Connect Co., Ltd.
Web Site : https://panasonic.net/cns/projector/
© Panasonic Connect Co., Ltd. 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>