crankbrothers Highline 3 Dropper SeatPost User Guide

crankbrothers Highline 3 Dropper SeatPost

Description

1. Back Bolt (41 mm)
   

2. Upper Clamp
   

3. Lower Clamp
   

4. Head Assembly
   

5. front Bolt (35mm)
   

6. Cartridge Screw
   

7. Quill
   

8. Cartridge
   

9. Seal & Collar Assembly
   

10. Upper Igus Bearing
    

11. Igus Guide Key x2
    

12. lower Igus Bearing
    

13. Body
    

14. Actuator Assembly
    

15. Valve Rod
    

16. Barrel Adjuster
    

17. Cable Crimp Screw
    

18. lever Clamp Screw
    

19. lever

Safety guidelines

• Follow the installation instructions closely! Pay attention to specified torques and proper tools needed
• Do not exceed the minimum insertion line This can ceuse the post and/or your frame to fail.
• If you are not comfortable with the installation, set-up or use of your seatpost, please contact your local Crankbrothers dealer or Crankbrothers directly.
• Always use a helmet and follow the rules of the road when cycling.
• Use proper headlights and taillights when riding at times of reduced visibility.
• For optimal performance and maximum life of your sestpost, be sure to follow the maintenance schedule outined below.
• After a crasn, accident or if you suspect possible damage, have the post inspected by a professional bike mechanio.

Warranty information

• Orankorothers is provided to offer a 2-year unconditional warranty on the cartridge of the Highline Seatpost. This sealed cartridge inside the
• Highline controls the main function of the seatpost and is guaranteed to be maintenance-free. Any tampering or modification of this cartridge will void its warranty.
• The Highline seat post’s components (excluding cartridge) are warranted against defects in materials or workmanship for 2 years from the date of purchase. Products wil be repaired or replaced at crankbrothera’s discretion. The Highlines
• warranty (excluding cartridges) does not cover wear and tear items such as dust seals, o-rings, bearings, guide blocks, cables or cape housing. Other exclusions include damage from over-clamping, unauthorized modifications, lack of maintenance, impact or rider error.
• Your recall will be required for al warranty claim! To fie a claim in the USA, go to www.crankbrothere.com/create ticket. Outside the USA, claims must be made through the dealer where your Seatpost was purchased. For detailed warranty information, please visit www.crankbrothers.com.

Maintenance schedule: Service intervals are subject to rider stile and geographical location.

Aiter each ride: Wise eestpost clean of duat and debrie focueino on the seal ares and ensund the top of pull, Inapect eestpoet for demage.
150-175 Hours of Ride Time: Lubricate internally by the unthreading collar, applyingauspenaico apeotto grease never use oily to the quit below collar and re-assembling. Check nerdwigre for soeditled toroue. For details, vietcrendorothera.com.
450+ Hours of Ride Time:
Inspect boats and refresh internals as needed. Please contact our local crenkorothere dealer on orankdorothere.com for details.
CAUTION: READ THIS BEFORE INSTALLING YOUR SEATPOST!
Riding bicycles is inherently dangerous. The instructions should be read thoroughly before installation. Failure to follow these instructions and safety guidelines before installing and using Crankbrothers products can result in severe injury or death.

Lever Sold Separately

CAUTION

INSTALLATION INSTYRUCTION

QUESTIONS, COMMENTS OR TROUBLESHOOTING TIPS

• tel: 1 949 464 9916
• fax: 1 949 607 4221
• crankbrothers.com info@crankbrothers.com.
• Congratulations on your new Crankbrothers Highline Seatpost.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>