INVENTUM IVW6015A-05 Built-In Dishwasher User Manual

: June 10, 2024
: INVENTUM

**INVENTUM IVW6015A-05 Built-In Dishwasher User Manual

**

Introduction

HOW TO USE THIS DOCUMENT

Read this document completely. Make sure that you know and understand all the instructions.
Obey the safety instructions to prevent injury and/or damage to the appliance and its surroundings.
Do the procedures completely and in the given sequence.
Keep this document in a safe area for future use. This document is a part of the appliance.

SYMBOLS USED IN THIS DOCUMENT

Safety symbol	Function	Description
Warning	“ Warning ” means that injury or death is possible if you

do not obey the instructions.
| Caution| “ Caution ” means that damage to the appliance is possible if you do not obey the instructions.
Note Icon | Note| “ Note ” is used to give additional information.

Safety

GENERAL SAFETY INSTRUCTIONS

Fully read the instruction manual prior to using the appliance.
Carefully store the instruction manual for future reference.
Only use this appliance for the purposes described in the instruction manual. If the appliance is used for other purposes the full responsibility of any consequences lies with the user. Any damages to the appliance or other products are not covered by the warranty
If the safety instructions and warnings are not observed, the manufacturer cannot be held liable for any resulting damage.
Make sure that the appliance is placed out of reach of children. Children are not always able to understand potential risks. Teach children how to handle electrical appliances in a responsible way.
This appliance cannot be used by children from 0 to 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of appliance in a safe way and understand the hazards involved.
Keep the appliance and the mains cable out of reach of children younger than 8 years.
Children are not allowed to perform cleaning and maintenance.
Do not let children play with the appliance.

DELIVERY

Do a check for damage to the packaging or the appliance that resulted during transportation.
Do not use a damaged appliance. Contact your supplier.
Dispose of the packaging materials according to local regulations.
Keep the packaging material out of reach from children. Danger of suffocation.

INSTALLATION

This appliance should be installed and repaired by an authorized service only.
Place and connect the appliance according to the installation regulations.
Make sure that the appliance is not plugged in during placement.
Check whether the indoor electrical fuse system is connected
according to the regulations.
All electrical connections must match the values of the rating plate.
If the mains cable is damaged, it can only be replaced by the service organizations of the manufacturer or equivalent qualified persons.
Make sure that the appliance is not placed on the mains cable.
Do not use an extension cable or a multiple socket for the connection. The mains plug must be easily accessible after installing the appliance.
Do not excessively bend the water inlet and drain hoses or the mains cable during installation. Make sure that the water inlet and drain hoses or the mains cable do not become stuck.
After installing the appliance, make sure that you run the appliance without dishes for the first time.

POSITIONING THE APPLIANCE

When determining the place of the appliance, make sure that you choose a place where you can easily load and unload it.
Do not place the appliance in a location where the room temperature can be below 0°C.
Place the appliance close to a water tap or drain and mains socket. Keep in mind that the connections will not be changed when they are made.
Do not hold the appliance at the door or control panel to move it.
Make sure that the water inlet and outlet hoses do not get stuck while placing the appliance.
Place the appliance in a safe and level location.
Make sure that the appliance is level and balanced by adjusting the feet. When the appliance is placed correctly the door opens and closes easily.

WATER CONNECTION

Make sure that the indoor plumbing is suitable for installing the appliance.
Install a filter at the water supply to avoid damage to the appliance due to contamination from the water (sand, clay, rust, etc.).
Use the new water inlet hose supplied with the appliance. Before making the connection, run water through the hose.
Make sure that you connect the water inlet hose directly to the water tap. The pressure of the water tap must be a minimum of 0,03 MP and a maximum of 1 MP. Install a pressure relief valve if the pressure is more than 1 MP.
After connecting the appliance, open the water tap completely and do a check for leaks.
The appliance is supplied with a double-walled aquastop. The system automatically cuts off the water supply if the water inlet hose is leaking and the space between the walls is filled with water. Do not cut into the aquastop and make sure that the aqua stop does not get twisted or stuck.
Do not use a drain hose that is longer than 4 meter. As a result, dishes can remain dirty. The manufacturer will not accept responsibility.
The appliance must be connected to the water mains using the newly supplied hose sets. Do not reuse old hose sets.

ELECTRICAL CONNECTION

Make sure that the mains plug of the appliance is connected to a grounded mains socket. The manufacturer is not responsible for damage resulting from using the appliance with a mains socket that is not grounded.
Make sure that the voltage and the frequency values for the current correspond to the values of the rating plate.
The electrical system in your home must be supplied with a 16 Amp fuse. The appliance is designed for connecting to 220-240 V ~50Hz.
Do not connect the appliance during placement.
Use the provided mains plug.
The mains cable of the appliance must only be replaced by an authorized service or an authorized electrician. Failure to do so can lead to accidents.
For safety reasons, make sure that you disconnect the mains plug when a program has finished. Do not disconnect the mains plug when your hands are wet. This can result in electric shock.
Always pull the mains plug when you disconnect the appliance. Do not pull the mains cable.

SAFETY INSTRUCTIONS FOR OPERATION

This appliance is intended to use in household and similar applications, such as shops, offices and other working environments, farm houses, customers of motels, hotels and other residential environments and bed and breakfasts.
For safety reasons, only use accessories and spare parts from the manufacturer that are suitable for your appliance.
This appliance must be grounded, this prevents the risk of electric shock in the event of an error or fault. The appliance has a grounded mains cable and mains plug. Only connect the mains plug to a grounded mains socket that is installed according to local electrical regulations.
Incorrectly connecting the mains cable can result in a life threatening situation. In case of doubt, contact a qualified electrician or service technician.
Do not make changes to the mains plug. If the mains plug does not fit into the mains socket, contact a qualified electrician.
Do not place heavy objects on the opened door of the appliance
Do not stand on the opened door of the appliance. The appliance can fall over which can result into damage to the appliance.
Do not put any chemical dissolving agents such as solvents in the appliance. There is a risk of explosion.
Do not clean unsuitable plastic dishes in the appliance. Only dishes with a mark, indicating that they are dishwasher-safe can be cleaned in the appliance. Follow the instructions of the manufacturer when dishes do not have a mark.
Only use detergent, rinse aid and salt that is intended for dishwashers. The manufacturer will not be responsible for any damage resulting from using unsuitable products.
Keep detergent and rinse aid out of reach of children.
Keep children away from the appliance when the door is open. There can be cleaning agent present in the appliance. When cleaning agent is swallowed, immediately consult a doctor and take the packaging.
Some dishwasher detergents are strongly alkaline and can be extremely dangerous if swallowed. Avoid contact with the skin and eyes. Keep children and pets away from the appliance when the door is open. Check that the detergent reservoir is empty after completion of the wash cycle.
Keep the door closed. You can fall.
Avoid contact between the cleaning agent and your skin and eyes.
Make sure that all loose components in the appliance are fitted correctly.
Do not open the door of the appliance during operation. Hot water can come out.
Do not use the appliance for any other purpose than washing dishes.
Only use the appliance in a frost free room.
Remove the door or deactivate the lock when disposing of the appliance. Make sure that children cannot lock themselves in an old appliance.
Make sure that the detergent reservoir is empty at the end of a wash cycle.
Make sure that you fill the salt and rinse aid reservoir before first use and when the indicators are on.
Make sure that you set the salt consumption before use.
Make sure that you disconnect the appliance before cleaning or performing repairs. Remove the mains plug from the mains socket or turn off the switch in the fuse box.
Make sure that long and/or sharp items of cutlery are placed facing down in the cutlery basket or are placed horizontally in the upper basket or the cutlery drawer.
Do not put any items in the appliance that are not suitable for dishwashing.
Do not fill a basket above the capacity. The manufacturer will not be responsible for damage to the appliance caused by movement of a basket.
Do not drink the water from the appliance. The water is not suitable for consumption.
Malfunctions of the appliance must be repaired by a qualified service technician. Repairs that are performed by other persons are not covered by the warranty.

Specifications

GENERAL SPECIFICATIONS

Item	Specification
Fully integrated	Yes
Color of control panel	Gray
Number of spray arms	3
Upper basket height adjustable	Yes
Maximum amount of place settings	15
Half-load option	Yes
Timer [hours]	1-19
Type of display	LED display
Aquastop	Yes
Type of drying system	Turbo

DIMENSIONS AND WEIGHT

Item	Specification
Dimensions (W x D x H) [mm]	598 x 550 x 820
Built-in height [mm]	820-870
Built-in width [mm]	600
Built-in depth [mm]	570
Height of appliance door (min. & max.) [mm]	647-717
Net weight [kg]	38
Gross weight [kg]	40
Weight of appliance door (min. & max.) [kg]	3-8

TECHNICAL SPECIFICATIONS

Item	Specification
Total power consumption [W]	1900
Heating power [W]	1800
Pump power [W]	100
Drain pump power [W]	30
Rated voltage [V] / frequency [Hz]	220-240 / 50
Water supply pressure [MPa]	0.03 (0.3 bar) – 1 (10 bar)
Current [A]	10
Length of mains cable [m]	1.65
Type of mains plug	EU/TR
Type of supply hose connection	3/4 inch, inner thread
Position of supply hose	Right rear
Length of supply hose [m]	1.47
Position of outlet hose	Right rear
Length of outlet hose [m]	2.00

Description

INTENDED USE

The appliance is intended to wash dishes. Do not use the appliance for any other purpose than described in this document.

BUILT-IN DISHWASHER

(Figure 1)

A Nozzle of the cutlery drawer
B Cutlery drawer
C Upper basket
D Lower basket
E Rating plate
F Control panel
G Detergent and rinse aid reservoir
H Salt reservoir
I Filters
J Lower spray arm
K Upper spray arm

Item	Function
Nozzle of the cutlery drawer	To clean the dishes in the cutlery drawer.
Cutlery drawer	Refer to section Loading the appliance.
Upper basket	Refer to section Loading the appliance.
Lower basket	Refer to section Loading the appliance.
Rating plate	To show the specifications of the appliance.
Control panel	Refer to section Control panel.
Detergent and rinse aid reservoir	To hold the detergent and rinse aid.
Salt reservoir	To hold the salt.
Filters	To keep the appliance free from contamination.
Lower spray arm	To clean the dishes in the lower basket.
Upper spray arm	To clean the dishes in the upper basket.

CONTROL PANEL

(Figure 2)

A Programs
B Display
C On/off button
D Program selector button
E Half-load indicator, lower basket
F Half-load indicator, upper basket
G Extra-dry indicator
H Extra-hygiene indicator
I Salt indicator
J Rinse aid indicator
K Options button
L Timer button
M Half-load button Item Function

Item	Function
Programs	To show an overview of the available programs. Refer to section

Programs.
Display| To show the remaining time of the selected program and the timer.
On/off button| To start or stop the appliance.
Program selector button| To select a program.
Half-load indicator, lower basket| To show which area for dishwashing is selected:

The upper indicator is on, when the upper basket is selected as a dishwashing area.
The lower indicator is on, when the lower basket is selected as a dishwashing area.
Both indicators are on, when both the upper and the lower basket are selected as dishwashing areas.

Half-load indicator, upper basket
Extra-dry indicator| To show that the extra-dry option is selected.
Extra-hygiene indicator| To show that the extra-hygiene option is selected.
Salt indicator| To show that the level of salt is low.The indicator is on when the salt reservoir is almost empty.
Rinse aid indicator| To show that the level of rinse aid is low.The indicator is on when the rinse aid reservoir is almost empty.
Options button| To browse through the options:

Extra-dry: Select the extra-dry option to obtain drier dishes.
Extra-hygiene: Select the extra-hygiene option for extra hygienic cleaning.

Timer button| To delay the start of a program.
Half-load button| To select an area for dishwashing: the upper basket, the lower basket or both baskets. This decreases energy and water consumption.

PROGRAMS

Icon	Name	Description	Time [min.]
****	**** P1 – Eco	Daily program for normally soiled dishes. The program

Note:
For the programs “Auto intensive” , “Auto basic” and “Auto delicate”, the appliance automatically adjusts the washing time, the temperature and the amount of water based on the soil level of the dishes.

The program duration can change based on the amount of dishes, the water temperature, the ambient temperature and selected additional functions.
The eco program is suitable to clean normally soiled dishes. It is the most efficient program because of the combined energy and water consumption and it complies with the EU eco-design legislation.

Note:
The energy consumption values of the eco program can differ according to regulations 10/16/2010 and 1059/2010. The table complies with regulations 2019/2022 and 2017/2022.

When the appliance is used according to the instructions of the manufacturer, washing dishes in a household dishwasher usually consumes less energy and water during the use phase compared to hand-washing dishes.
Short programs do not include drying.
Only use powder detergent when you choose a short program

Operation

PREPARING FOR OPERATION

Do a check if the electricity and the water supply connections of the appliance match the values indicated in the installation instructions.
Remove all packaging material inside the appliance.
Fill the salt reservoir. Refer to section Filling the salt reservoir.
Fill the rinse aid reservoir. Refer to section Filling the rinse aid reservoir.

FILLING THE SALT RESERVOIR
For a good result the appliance needs soft (less calcareous) water. Salt is used to soften the water and it prevents white lime residues on your dishes and the interior of the appliance.

Caution: Only use salt that is suitable for a dishwasher. Do not use table salt.

Note: Fill the salt reservoir when the salt indicator on the control panel is on

Remove the lower basket.
Turn the cap (A) of the salt reservoir counter-clockwise to remove it.
Fill the salt reservoir with water.
Note: You only have to fill the salt reservoir with water before first use of the appliance.
Put a funnel in the opening of the salt reservoir.
Fill the reservoir with salt until the overflow level.
Install the cap of the salt reservoir.

Caution: Remove any spilled salt immediately and run a full program to prevent corrosion of the appliance.

SETTING THE LEVEL OF SALT CONSUMPTION
The salt consumption of the appliance depends on the level of water hardness. Set the level of salt consumption according to the information in section Water hardness level settings (salt consumption)

Note: Contact your local water company to verify the level of water hardness in your area.
Note: As a default, the level of water hardness of the appliance is set to level 3.

Make sure that the appliance is off.
Turn on the machine by pushing the on/off button.
Push and hold the program selector button immediately after the machine is turned on.
Hold the program selector button until the display briefly shows SL. After that the display shows the latest set level of water hardness.
Push the program selector button to change the level of water hardness.
Push the on/off button to confirm the setting.

Postbus 5023 6802 EA Arnhem

www.inventum.eu

instagram.com/inventum1908
facebook.com/inventum1908
youtube.com/inventum1908

INVENTUM Logo