ignition 542635 2Bright Expo 575 15° Lens Kit User Guide

June 9, 2024
ignition

ignition logo 542635 2Bright Expo 575 15° Lens Kit
User Guide

542635 2Bright Expo 575 15° Lens Kit

Quick Start Guide
This quick start guide contains important information on the safe operation of the product. Read and follow the safety advices and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.

Safety instructions

Intended use
Dieses Produkt dient als optionales Zubehör für den Ignition 2Bright Expo 575. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! Never let children unattended use electrical devices.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged.
Risk of fire
The optical lenses of the device focus the light and can cause a burning glass effect when exposed to sunlight. Never expose unassembled lenses to direct sunlight.
Where to use the product
Never use the product

  • in conditions of extreme temperature or humidity
  • in extremely dusty or dirty areas
  • at locations where the unit can become wet

General handling

  • To prevent damage, never use force when handling the product.
  • Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

Features

  • Ignition 2Bright Expo 575 15° Lens Kit (item no. 542635)
    – optional lens with a dispersion angle of 15°

  • Ignition 2Bright Expo 575 35° Lens Kit (Artnr. 542636)
    – optional lens with a dispersion angle of 35°

  • Suitable for
    – Ignition 2Bright Expo 575 WW (item no. 542631)
    – Ignition 2Bright Expo 575 CW (item no. 542633)
    – Ignition 2Bright Expo 575 TW (item no. 542637)

Replacing the lens

ignition 542635 2Bright Expo 575 15° Lens Kit - lens Hazardous voltage

Before starting the lens replacement, the device must be turned volt-free!
Failure to comply may result in electric shock and risk of fire and loss of life.

  1. Disconnect the mains cable of the device from the power supply.
  2. Detach the barn doors, the diffuser and the colour filter frame.
  3. Remove the lens by pulling the safety cable.
  4. Remove the safety cable from the safety eyelet (1).
  5. Place the new lens in the correct position determined by the two pins on the device and the respective recesses (2) at the lens. The lens is fixed to the device by means of a magnet.
  6. Attach the safety cable to the safety eyelet (1).
  7. Secure the other end of the safety cable with the carabiner on the bracket.

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Thomann GmbH
• Hans-Thomann-Straße 1
• 96138 Burgebrach
www.thomann.de
info@thomann.de
DocID: 542635_542636_14.06.2022

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals