RK ROYAL KLUDGE 166-85701-08 Mechanical Wireless Keyboard User Manual
- June 10, 2024
- RK ROYAL KLUDGE
Table of Contents
- RK ROYAL KLUDGE 166-85701-08 Mechanical Wireless Keyboard
- Product Usage Instructions:
- Product Basic
- Wired Mode & Charge
- How To Use
- How To Use
- BATTERY LEVEL REMINDER
- BACKLIGHT CONTROL
- MULTIMEDIA KEY FOR WINDOWS
- SYSTEM REQUIREMENT
- FCC COMPLIANCE STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RK ROYAL KLUDGE 166-85701-08 Mechanical Wireless Keyboard
Product Information:
This is a keyboard device that can be used in both wired and wireless modes. It comes with a USB cable for charging and a Type-C wire for connectivity. The keyboard has a backlight feature that indicates the battery level and can be controlled for brightness, color, and speed. It also has a Windows lock function, media controls, and can be used with both Windows and Mac systems. The product is compatible with Bluetooth 3.0 devices, PC with Windows 7 or Mac OS X 10.6 Snow Leopard or higher, iPad/iPhone5, and Android 5.0 Lollipop. The FCC compliance statement confirms that the device complies with part 15 of the FCC Rules.
Product Usage Instructions:
- Switch the power to OFF before plugging in the USB cable for charging.
- After plugging in the USB cable, the keyboard will flash three times to indicate that it’s in the charging state.
- The keyboard will flash five times when it’s fully charged.
- To enter the wired mode, switch the power to OFF.
- In wireless mode, the backlight will turn off after 5 minutes of inactivity.
- The Fn key will flash when the voltage is low.
- Press FN+ENTER to check the battery level. The backlight will indicate the battery level for 10%, 20%, and 100% charged.
- Press FN+A to switch to the Windows system and use the media controls.
- Press FN+S to switch to the MAC system and use the media controls.
- Use FN+INS to switch backlight modes and FN+PRTSC to switch backlight colors.
- Use FN+SPACE BAR to lock/unlock the Windows system.
- Use FN+SCRLK to adjust the backlight speed.
- Use FN+B to switch to Bluetooth mode and connect to compatible devices.
- Use FN+ENTER to enter the 2.4GHz mode.
- Refer to the user manual for more information on using the product.
Product Basic
Wired Mode & Charge
How To Use
How To Use
BATTERY LEVEL REMINDER
BACKLIGHT CONTROL
MULTIMEDIA KEY FOR WINDOWS
SYSTEM REQUIREMENT
BT Mode
- Device With Bluetooth 3.0 or later
- PC: Windows 7 or Later
- Mac: macOS X 10.6 Snow Leopard or Later
- OS: All iPads/iPhone 5 or Later
- Android: 5.0 Lollipop or Later
Wired/2.4Ghz Mode
- Computer With Available USB port
- PC: Windows 7 or Later
- Mac : macOS X 10.6 Snow Leopard or Later
In wireless state, the backlight will not be operated for 5 minutes to sleep. In wired mode, the backlight goes into sleep after 5 minutes without operation.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications to this unit not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Have an issue with one of our RK products?
Feel free to contact us with any product issues or questions. We will reply
as quickly as possible to ensure all your needs are handled. Please contact
the seller.
WARNING: This product can expose you to chemicals including {name of one or more chemicals}, which is (are) known to the State of California to cause cancer and birth defects or other reproductve harm. For more information go to www.P65wamings.ca.gov.
Executive standard:GB/T 14081-2010 Made in China www.rkgaming.com