FRANKE FBI 525 XS HCS Kitchen Hood Installation Guide
- June 10, 2024
- Franke
Table of Contents
FRANKE FBI 525 XS HCS Kitchen Hood
Product Information
The product is a kitchen hood available in two models: FBI 525 XS HCS and FBI 705 XS HCS. The product is designed for installation inside a unit. It comes with a plastic casing around the hood to ensure safety. The product is manufactured by Franke S.p.a., an Italian company located in Peschiera del Garda.
Product Usage Instructions
- Before proceeding with installation, read the safety information provided in the user manual.
- Ensure that the hood is installed inside a unit, so that the plastic casing around the hood cannot be reached when installation is complete.
- Follow the instructions provided in the user manual for installation.
- Make sure that the hood is mounted in such a way that the plastic casing is not accessible after installation.
- Ensure that there is a minimum distance of 200mm between the hood and the cooking surface.
- The product has a power rating of F = 4x.
- The product has one G1 filter and one W filter with dimensions of 450mm and 650mm respectively.
- The minimum distance between the hood and the ceiling should be 15mm, and the maximum distance should be 30mm.
- The product comes with two G1 filters and two W filters. Follow the instructions provided in the user manual for replacing these filters.
- Refer to the user manual for maintenance instructions.
Warning! Before proceeding with installation, read the safety information in the User Manual.
The hood must be installed inside a unit, so that the plastic casing around the hood cannot be reached when installation is complete.
UNPACKING
TOOLS
INSTRUCTION
ASSEMBLY
Franke S.p.a.
Via Pignolini, 2
37019 Peschiera del Garda (VR)
www.franke.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>