Nintendo SW001 Wireless Controller for N-SL User Guide
- June 10, 2024
- Nintendo
Table of Contents
Nintendo SW001 Wireless Controller for N-SL
Product Description
This product is a wireless Bluetooth gamepad, which belongs to the wireless blue control gamepad (using wireless Bluetooth technology). It can be remotely controlled and easy to operate. It can be used for the N-SL console. It also supports PC x-input PC games.
Product Parameter
- Voltage: DC 5 V
- Charging time: About 3.5 hours
- Working Current: <20mA
- Vibration Current: 70-120mA
- Sleep Current: 9uA
- Charging Current: About 180mA
- Battery Capacity: 550mAh
- USB length: 70 cm/2.30 ft
- Use time: About 10 hours
- Bluetooth Transmission Distance <10m
Pairing and Connecting
Bluetooth connection in console mode:
Step 1: Turn on the console, click the System settings menu button on the
main page interface (Figure ), enter the next menu option, click the Airplane
Mode option (Figure ), and then click the Controller Connection (Bluetooth)
(Figure 3 option Turn on its Bluetooth function (Figure 4).
Step 2: Enter the Bluetooth pairing mode of the console and controller,
click the Controllers menu button on the console homepage interface (Figure
⑤), enter the next menu option and click the Change Grip/Order option. The
console will automatically search for paired controllers (Figure ⑥
).
Step 3: Press and hold the HOME button for 3-5 seconds to enter the
Bluetooth search pairing mode, LED1-LED4 marquee flashes quickly. After the
controller is successfully connected to the console, it vibrates and
automatically assigns the corresponding channel indicator of the controller to
be steady on.
Console mode wired connection:
Turn on the wired connection option of the PRO controller on the console, put
the console into the console base, and then connect the controller via the
data cable, the controller will automatically connect to the console, after
the data cable is pulled out, the controller will automatically connect back
to the console console via Bluetooth.
Wired connection in N-SL mode:
Turn on the wired connection option of PRO handle on the N-SL host, put the
console into the base, and then connect the handle through the data cable.
pressing any button (A/B/X/Y/ZL/ZR/R/L) of the handle will automatically
connect the console and pull out the data cable, then the handle will
automatically connect back to the console host through bluetooth.
Windows (PC360) mode:
When the controller is turned off, connect to the PC via a USB cable, and the
PC will automatically install the driver. The LED2 on the controller is long
on to indicate a successful connection.
The display name: Xbox 360 controller for windows .(wired connection)
TURBO Function Setting
- The controller has the TURBO function, hold down the TURBO button and then press the corresponding button to set the TURBO.
- In N-SL mode, A, B, X, Y, L1, R1, L2, R2 can be set
- In XINPUT mode, you can set A, B, X, Y, L1, R1, L2, R2
- Adjust Turbo speed:
- Turbo + right 3d up, the frequency increases by one gear
- Turbo + Right 3d down the frequency by one gear
- The power-on default is 12Hz; there are three levels (5 times per second — 12 times per second — 20 times per second). When the Turbo combo is executed, the Turbo combo speed LED1 flashes accordingly as the Turbo indicator.
Motor Vibration Function
- The controller has a motor function; it uses a pressure-sensitive motor; the console can manually turn on or off the controller motor vibration. ON/OFF
- Motor intensity can be adjusted under N-SL platform
- Adjust the motor intensity:
- turbo+ left 3d up, the intensity increases by one gear
- turbo+ left 3d down, the intensity is reduced by one gear
- A total of 4 levels:
- 100% strength, 70% strength, 30% strength, 0% strength, Power-on default 100%
Power off/Charge/Reconnect/Reset/Low Battery Alarm
| status | Description |
|---|
power off
| When the controller is turned on, press and hold the HOME button for 5S to
turn off the controller.
When the controller is in the back-connecting state, it will automatically
shut down when it cannot be connected after 30 seconds.
power off
| When the controller is in the state of code matching, it will enter back
connection when the code cannot be matched after 60 seconds, and it will
automatically shut down .
---|---
When the controller is connected to the machine, it will automatically shut
down when there is no button operation within 5 minutes .
charge
| When the controller is turned off and the controller is inserted into the adapter, LED 1-4 flashes, after fully charged, LED
1-4 goes out.
The controller is online, when the controller is plugged into the USB, the corresponding channel light flashes slowly, and it lights up when it is full.
Reconnect
| The console wakes up and reconnects: After the controller is connected to
the console, the console is in sleep state, the controller connection
indicator is off, short press the controller HOME button, the indicator light
flashes slowly and the marquee flashes back to wake up the console. The
console wakes up in about 3-10 seconds on. (The console wake-up state can only
be effective by pressing the HOME key)
Reconnect when the console is powered on: When the console is powered on,
press HOME key on the controller to reconnect.
reset
| When the controller is abnormal, such as button disorder, crash, failure to connect, etc., you can try to restart the controller. Reset method: Insert a slender object into the Reset hole on the back of the controller, and press the Reset button to reset the controller state.
Low battery alarm
| When the controller battery voltage is lower than 3.6V (according to the principle of battery characteristics), the light of the corresponding channel flashes slowly,indicating that the controller is low and needs to be charged. 3.45V low power shutdown.
Package
- 1 X Controller
- 1 X USB Charging Cable
- 1 X User Instruction