Nintendo S078 Switch Joycon-x Game Controller User Manual
- June 1, 2024
- Nintendo
Table of Contents
Nintendo S078 Switch Joycon-x Game Controller
Product Information
Specifications:
- Name: Joy-Con Left and Right Handle
- Material: ABS+Copper+tin
- Size: 102 x 35.9 x 28.4(mm)
- Input: 5V 4A
- Compatible Console: Switch
- Color: Customizable
- Weight: 100g
- Output: 20W
Product Structure:
- Action button: L
- Select button: –
- Left joystick: L3 Press the button
- Direction button: Up Down Left Right
- Screenshot button: Capture
- Action button: ZR, X, Y, A, B
- Action button: R Start button: +
- Action button: ABXY
- Right joystick: L3 Press the button
- Home button: HOME
- Action button: SL LED Pilot lamp Sync button Action button: SR SR SL SL SR Action button: ZL Remove button: Used when removing Joy-Con from the mainframe.
Instructions :
- Direct to left and right joystick: Place the joystick right side up, the upper right of the left joy-con has – button, the upper right of the right joy-con has + button.
- Connect joy-con to NS console: Place the side with + – buttons up, slide the joy-con from the top to the bottom along the sliding rail of the console screen until hearing the click sound.
- Connect joy-con to grip: It’s the same way as connecting to NS console, slide the joy-con from the top to the bottom along the sliding rail of the grip until hearing the click sound. The grips connected with joy-con will light up on either side of the NS icon.
- Take joy-con down from the device: Find the uninstall button on the back side of the joy-con, Slide the joy-con from the bottom to the top while holding the uninstall button until the joy-con is completely detached from the device.
- Connect and use: Connect the left and right joystick to either side of the sliding rail of the console, the console icon will indicate connection. One console can log in to a maximum of 10 control devices, one joy-con is the equivalent of one control device. The joy-con can be taken down to use after the connection is successful.
About Upgrade:
The gamepad can be upgraded via USB cable without installing drive (PC
upgrade). Support WinXP/Win 7/Win 8.1/Win 10 upgrade (Use the offline upgrade
package in PC, open the upgrade package, hold the 3D middle button of the
gamepad and connect the gamepad to PC via sliding rail USB cable, then click
DOWNLOAD)
Built-in Functions:
- Equipped with motor vibration and six-axis function
Electric Parameter:
Charging Indicator: Hang charging: When the power of joy-con is too
low, the console screen will indicate low power, in this case, the joy-con
should be installed to the console to be charged. The battery icon of the
console screen will indicate power while charging, when it is fully charged,
the screen will go back to black.
FAQ:
-
Q: How do I charge the Joy-Con?
A: When the power is low, connect Joy-Con to the console for charging. The battery icon on the console screen will indicate charging status. -
Q: How many control devices can be connected to one Switch console?
A: One Switch console can connect up to a maximum of 10 control devices, where each Joy-Con counts as one control device.
USER MANUAL
Switch Joycon-x Game Controller
Joy-con is the standard controller of Switch, can be connected to the screen of the console through sliding rail, and can also be connected wirelessly away from the sliding rail, just as a normal controller. In some specific games, joy-con can be used as two single controllers. In some games, joy-con can be held by hands as somatosensory controllers. Joy-con is equipped with motor vibration and six-axis function, can’t support air upgrade, but support local upgrade package.
PRODUCT INFORMATION
-
NAME:
Joy-Con Left and Right Handle -
MATERIAL:
ABS+Copper+tin -
SIZE :
≈102 x35.9 x 28.4(mm) -
INPUT:
5V 4A -
COMPATIBLE CONSOLE:
Switch -
COLOR:
Customizable -
WEIGHT:
100g -
OUTPUT:
20W
PRODUCTSTRUCTURE
INSTRUCTIONS
-
Direct to left and right joystick
Place the joystick right side up, the upper right of the left joy-con has “-” button, the upper right of the right joy-con has “+” button. -
Connect joy-con to NS console
Place the side with “+” “-” buttons up, slide the joy-con from the top to the bottom along the slidingrail of the console screen until hearing the click sound. -
Connect joy-con to grip
It’s the same way as connecting to NS console, slide the joy-con from the top to the bottom along the sliding rail of the grip until hearing the click sound. The grips connected with joy-con will light up on either side of the NS icon. -
Take joy-con down from the device
Find the “uninstall” button on the back side of the joy-con, Slide the joy-con from the bottom to the top while holding the “uninstall” button until the joy- con is completely detached from the device. -
Connect and use
Connect the left and right joystick to either side of the sliding rail of the console, the console iconwill indicate connection. One console can log in to a maximum of 10 control devices, one joy-conis the equivalent of one control device. The joy-con can be taken down to use after the connectionis successful. -
Back to connection mode
When joy-con is separated from the console, press any button of the joy-con to wake up the controller, four LED galloping flashes. If they are not connected to the console for five seconds, they will go into sleep mode (when joy-con is separately from the console, they can be back to connection to the console by pressing “home” button when the console is in sleep mode). When the major joy- con which is installed on the sliding rail of either side of the console is in sleep mode, press “home” button to wake up the console. -
About upgrade
The gamepad can be upgraded via USB cable without installing drive (PC upgrade). Support WinXP/Win 7/Win 8.1/Win 10 upgrade (Use the offline upgrade package in PC, open the upgrade package, hold the 3D middle button of the gamepad and connect the gamepad to PC via sliding rail USB cable, then click “DOWNLOAD”)
Function of button
- Left joystick is consisted of UP DOWN LEFT RIGHT Capture – L LZ SL SYNC SR Button left stick
- Right joystick is consisted of A B X Y R RZ HOME + SR SL Reset、Right Stick.
Built-in function
Equipped with motor vibration and six-axis function
ELECTRIC PARAMETER
-
Charging indicator
Hang charging: When the power of joy-con is too low, the console screen will indicate low power, in this case, the joy-con should be installed to the console to be charged. The battery icon of the console screen will indicate power while charging, when it is fully charged, the screen will go back to black. -
Auto sleep
When the console screen is off, joy-con will go into sleep mode.
When the console is in sleep mode, press “HOME” button of the gamepad to wake up the console.
- Sleep electricity: <15uA
- Working electricity: <20mA
- Working voltage: 3.0V
- Input voltage: DC 4.5~5.5V
- Charging electricity: 147mA
FCC Warning
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE 1:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.