eureka 3670 Series 3670M Mighty Mite Vacuum Cleaner Owner’s Manual
- June 4, 2024
- Eureka
Table of Contents
**
**
eureka 3670 Series 3670M Mighty Mite Vacuum Cleaner
IMPORTANT
Do not return this product to the store. For assembly problems or questions,
for replacement of broken or missing items, or to order replacement parts and
accessories to be shipped directly to you contact: Eureka Customer Service
toll free at 1-800-282-2886″, 8 a.m. to
7:30 p.m., (CST), Monday – Friday and 1 O a.m. to 6:30 p.m. Saturday and
Sunday. Or visit our web site, www.eureka.com.
Please Retain
We suggest you record the model, type and serial numbers below. They are
located on the bottom of your cleaner. For prompt and complete service
information, always refer to these numbers when inquiring about service.
Model & Type __ __
Serial No. ___ __
It is also important to keep your receipt as proof of date of purchase.
General Information
This cleaner is designed to pick up dirt and dust particles. Avoid picking up
hard or sharp objects that could damage the vacuum cleaner.
- DO NOT OIL the motor at
- any time. The bearings are permanently lubricated and sealed.
Registration: To register your product visit www.eureka.com and click on
the ‘Register Your Product’ link in the top right corner.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. For
additional service information telephone our toll free number for the nearest
Eureka Authorized Warranty Station. You should know the model, type and serial
numbers (located on the rating plate) when you call:
1-800-282-2886
www.eureka.com
If you prefer, you can write to Electrolux Home Care Products North America,
Customer Service, P.O. Box 3900, Peoria, Illinois, 61612, USA. In Canada,
write to Electrolux
Home Care Products canada, 5855 Terry Fox Way, Mississauga, Ontario L5V 3E4.
Refer to The Eureka Warranty for complete service information.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
-
Do not use outdoors or on wet surfaces.
-
Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and before servicing.
-
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
-
Use only as described in this manual. Use only manufacturer’s recommended attachments.
-
Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
-
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or comers.
-
Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
-
Do not use extension cords or outlets with inadequate current carrying capacity.
-
Turn off all controls before unplugging.
-
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
-
Do not handle plug or vacuum cleaner with wet hands or operate without shoes.
-
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything
that may reduce airflow. -
This vacuum cleaner creates suction. Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts. -
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
-
Do not use without dust bag or filter(s) in place.
-
Use extra care when cleaning on stairs.
-
Do not pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
-
Store your cleaner indoors in a cool, dry area.
-
Keep your work area well lighted.
-
Unplug electrical appliances before vacuuming them.
WARNING:
This product contains chemicals known to the State of California to cause
cancer, birth defects or reproductive harm. WASH HANDS AFTER HANDLING
SAVE THESE INSTRUCTIONS
To reduce the risk of electrical shock, this appliance has a polarized plug
(one blade is wider then the other). This plug will fit in a polarized outlet
only one way. If the plug does not fully fit into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
Automatic Motor Shut-Off
To protect from overheating, this vacuum cleaner is equipped with a thermostat
which automatically shuts off the motor if it overheats. Should this happen:
Step 1: Turn off the switch and unplug the cleaner because the thermostat
will allow the cleaner to automatically start running again when the motor
cools (approximately 30 minutes).
Step 2: Check the hose, bag and filter regularly, as a clogged hose, full
bag or dirty filter could cause the motor to overheat.
Step 3: If the cleaner will not operate after cooling for approximately
30 minutes, call 1-800-282-2886 for
customer service or take it to a Eureka Authorized Service Center for repair.
PARTS LIST
- Canister
- Hose
- Telescopic extension wands (on some models)
- Extension wands (on some models)
- Floor tool
- Crevice tool (stored in canister handle)
- Combination tool
- Turbo nozzle (on some models)
- HEPA filter (on some models)
- Blower port
HOW TO ASSEMBLE
-
Step 1: Connect hose O to front of canister O
-
Step 2: Attach wands 0 or 0 to hose handle
-
Step 3: Place floor tool O on end of wand 0 or 0
-
Step 4: Place combination tool 0 in storage position on the back side of the canister
-
Step 5: Wrap cord around cord hooks on the bottom of the canister and snap plug into place over cord.
-
Step 6: For models with HEPA filter O,
HOW TO USE
CAUTION:
Do not plug in cleaner until you understand all controls and features.
To Clean Bare Floors and Rugs
-
Step 1 : Attach wands to hose handle.
-
Step 2 :Place floor tool on end of wand. Press button back to lower brush for bare floors. Press button forward to raise brush for carpets.
-
Step 3 : For models with telescopic wands, extend wands by pushing lock button down and pulling on lower wand until reaching desired height .
-
Step 4 : Adjust to maximum suction by closing the slip ring 0 on the hose handle .
-
Step 5: Rotate swivel cord hook O on bottom of canister to release cord .
-
Step 6 : Plug cord into appropriate outlet.
-
Step 7: Push on/off switch 0. Press once to turn on.
Press again to turn off .
To Clean Stairs, Upholstery and Window Treatments
- Step 1 : Attach combination tool, crevice tool or turbo nozzle (on some models only) to the end of the hose. If additional reach is needed place wand on hose handle first.
- Step 2: Adjust to minimum suction by opening the slip ring 0 on the hose handle
- Step 3 : Rotate swivel cord hook O on bottom of canister to release cord .
- Step 4: Plug cord into an appropriate outlet.
- Step 5: Push on/off switch 0. Press once to turn on.
Press again to tum off .
To Use Blower Port
-
Step 1: Remove HEPA filter (on some models only). S
-
Step 2: Detach hose O from front of canister (;) and attach to the blower port O on the back side of the canister.
-
Step 3: Rotate swivel cord hook O on bottom of canister to release cord .
-
Step 4 : Plug cord into appropriate outlet.
-
Step 5: Push on/off switch 0. Press once to turn on.
Press again to turn off .
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine
maintenance. To avoid unnecessary service calls, check the hose, bag and
filter often.
Disposable Dust Bags and Filters
The dust bag and motor filter play a very important roll in the efficiency of
the vacuum cleaner. If the bag or the motor filter become clogged, no air can
pass through the
cleaner and no cleaning can take place regardless of how powerful the unit is.
To keep the cleaner operating at maximum efficiency, change the dust bag
frequently and
clean the filter as needed. Some fine particles can restrict airflow very
quickly and will decrease performance even before the bag appears to be
full. For that reason, when vacuuming carpet fresheners or cleaners, powder,
plaster dust or similar fine substances, the bag and filter may need to be
changed more often.
To Replace Disposable Dust Bags -Style MM
CAUTION: Turn off vacuum and unplug the electrical cord before changing
dust bag. Never operate the vacuum cleaner without the dust bag in place.
Step 1: Turn off and unplug cleaner.
Step 2: Open lid by pushing down hood latch .
Step 3: Fold BAG CLOSURE FLAP down and push behind rubber
seal .
Step 4: Insert finger into upper left
notch then pull out and remove bag.
To Re-install the
Disposable Dust Bags
Step 1: Open bag folds slightly.
Step 2: Place bag in cleaner.
Step 3: Tuck bag corners under collar.
Step 4: Swing bag cover closed and push to latch
To Replace HEPA Filter (on some models)
Step 1: Grasp the bottom clips (l) on the filter O .
Step 2: Pull out and down to release .Replace Witt. MM,W.1m, filter, part number 60666.
To Re-install HEPA Filter (on some models) Check the HEPA filter O with
each disposable dust bag change. Replace twice a year or after every six bag
changes as needed.
Step 1: Insert upper filter corner tabs O firmly under rear housing tabs
© .
Step 2: Pivot filter O down until
bottom clips (l) on filter click securely into place on the cleaner .
To Clean the Motor Filter
CAUTION:
Tum off vacuum and unplug the electrical cord before cleaning the motor
filter. Never operate the vacuum cleaner without the motor filter in place.
Step 1: Remove the dust bag. See pages 12-13 for details.
Step 2: Grasp filter Q and pull out to remove .
Step 3: Rinse under warm water.
Step 4: When all parts are completely dry, replace filter and disposable
dust bag (see pages 12-13 for more details).
PROBLEM SOLVING
Note:
Tum off the switch and unplug the electrical cord before servicing.
Problem
| Cause|
Solution
---|---|---
Motor will not start
| Electric plug
Power switch not turned “ON”
|
- Push plug securely into outlet
- Try another outlet
- Check circuit breaker
- Make sure power switch is “ON”
No suction at end of hose| Full paper bag|
- Replace paper bag
- Replace paper bag
- Remove any clogs from hose that restrict airflow, then try agai
- Push front cover until it latches firmly
|
Paper bag clogged
|
Hose clogged
|
**** Front cover not latched
Reduced suction| Full paper bag Slip ring open Hose clogged|
- Replace paper ba
- Rotate slip ring on wand until hole is covered
- Remove any clogs from hose that restrict airflow, then try again
Cleaner shuts off
| Internal safety thermostat trips (see page 4 for details)|
- Unplug cleaner and check for obstructions in hose, wands and
attachments
Check for full paper ba
Clean/replace motor filter
General questions
|
Assembly or related attachments
|
- Gall 1-800-282-2886 between 8:00 a.m. to 7:30 p.m. CST Monday through Friday and 10:00 a.m. to 6:30 p.m. CST on Saturday. Know the Model number and Serial number when you call.
The Eureka limited warranty
Eureka warrants this vacuum cleaner to be free from defects in material and
workmanship for a term of one year for normal household use. Warranty is
granted only to the original purchaser and members of immediate household.
This warranty is good for one year from the date of purchase only when the
vacuum cleaner is used in the accordance with Eureka operating instructions.
Note: refurbished or remanufactured products have a one year limited warranty.
This warranty does not cover
- Parts of the vacuum that require replacement under normal use such as disposable dust bags, filters, drive belts, light bulbs, brush roll, bristles, impellers and cleaning.
- Damages or malfunctions caused by negligence, abuse, and use not in accordance with the Owner’s Guide.
- Defects or damages caused by unauthorized service or the use of other than Genuine Eureka, ARM & HAMMERTM and FiltreteTM by 3M parts.
What Eureka will do
Eureka will, at its option, repair or replace a defective vacuum or vacuum
part that is covered by this warranty. As a matter of warranty policy, Eureka
will not refund the consumer’s purchase price.
Obtaining warranty service
To obtain warranty service you must return the vacuum or vacuum part along
with “proof of purchase” to any Eureka Authorized Warranty Station. For Eureka
Authorized Warranty Station or Service Information, visit
www.eureka.com, write or telephone toll free:
USA: 1-800-282-2886
Electrolux Home Care
North America Service Division
P.O. Box 3900
Peoria, IL 61612
Canada: 1-800-282-2886
Electrolux Home Care
North America Service Division
5855 Terry Fox Way
Mississauga, Ontario L5V 3E4
Obtaining warranty service outside your community
You must pay the shipping charges to the Eureka Authorized Warranty Station.
Return shipping charges will be paid by the Warranty Station. When returning
parts for repair, please include the model, type and serial number located on
the rating plate on the lower backside of the vacuum.
Further limitations and exclusions
Any warranty that may be implied in connection with your purchase or use of
the vacuum, including any warranty of Merchantability or any warranty for
Fitness For A Particular Purpose is limited to the duration of this warranty.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitations may not apply to you. Your relief for the breach of this
warranty is limited to the relief expressly provided above. In no event shall
the manufacturer be liable for any consequential or incidental damages you may
incur in connection with your purchase or use of the vacuum. Some states do
not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights. You may also have other rights, which may vary by
state.
The ARM & HAMMER name is a trademark of Church and Dwight Co., Inc. 3M and
Filtrate are trademarks of 3M Company, used by Electrolux Home Care Products,
Inc. under license.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>