EPH CONTROLS CDC Digital Cylinder Thermostat Installation Guide
- June 11, 2024
- EPH CONTROLS
Table of Contents
EPH CONTROLS CDC Digital Cylinder Thermostat
PRODUCT INFORMATION
This thermostat is designed for use in normal environments and is hardwired for connection to a 230V power source. It is important to note that installation and connection should only be carried out by a qualified person and in accordance with national wiring regulations. Before commencing any work on the electrical connections, you must first disconnect the thermostat from the mains. None of the 230V connections must be live until the installation has been completed and the housing is closed. Only qualified electricians or authorized service staff are permitted to open the thermostat. There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised when open. (Prevent non-specialists and especially children from gaining access to it.) If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired. Prior to setting the thermostat, it is necessary to complete all required settings described in the section.
PRODUCTUSGE INSTRUCTION
- Mounting Options:
- To a recessed conduit box
- To a surface-mounted box
- Directly mounted on wall
- Disconnect the thermostat from the mains before commencing any work on the electrical connections.
- Install the thermostat in accordance with national wiring regulations and ensure that none of the 230V connections are live until the installation has been completed and the housing is closed.
- Only qualified electricians or authorized service staff are permitted to open the thermostat. There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised when open.
- Prevent non-specialists and especially children from gaining access to the thermostat.
- Complete all required settings as described in the section prior to setting the thermostat.
CAUTION
Installation and connection should only be carried out by a qualified person and in accordance with national wiring regulations.
- Before commencing any work on the electrical connections, you must first disconnect the thermostat from the mains.
- None of the 230V connections must be live until the installation has been completed and the housing is closed.
- Only qualified electricians or authorised service staff are permitted to open the thermostat.
- There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised when open. (Prevent non specialists and especially children from gaining access to it.)
- If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired.
- Prior to setting the thermostat, it is necessary to complete all required settings described in the section.
INSTALLATION
MOUNTING
This thermostat can be mounted in the following ways:
- To a recessed conduit box
- To a surface-mounted box
- Directly mounted on wall
DIMENSION
EPH Controls Ireland
EPH Controls UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>