InWin NR24 All-In-One Nebula Liquid CPU Cooler User Manual
- June 11, 2024
- InWin
Table of Contents
NR24 All-In-One Nebula Liquid CPU Cooler
Product Story
Interstellar Cooling
High Performance AIO Liquid CPU Cooler NR Series will provide your build with
stellar visual aesthetics. The water block is filled with crystal shimmering
stars and the radiator is equipped with high static pressure fans Luna AL120.
Gaze into the realms of Nebula!
Specifications
NR24 Package Contents
Installation Guide
INFO
- Please follow the related chapters to assemble.
- Please use the original provided accessories to avoid damage to the product.
Install AL120 Fans to Radiator
Parts Required ：240 mm/360 mm radiator, Luna AL120 Fans, Washers, Fan
Screws
Note: Please be sure to use a washer on each screw before installation.
Install Fans and Radiator combo to your PC chassis.
- Parts Required: Radiator Screws
Installation for motherboards
-
A. For Intel Motherboards (LGA 115X/1200/1366/20XX/1700)
-
Switch the Intel backplate pins according to the CPU socket of your motherboard.
Note: Intel LGA 20XX does not require back plate installation.
-
Attach the Intel backplate to the bottom of the motherboard.
Note : Intel LGA 20XX does not require backplate installation. -
Install the standoff screws onto your motherboard. Ensure to use the correct standoff screws for your CPU socket.
Parts Required: Standoff Screws (LGA115X/1200/1366/20XX/1700)
-
-
B. For AMD Motherboards (AMD or TR4)
- Please remove the retention module. AMD’s backplate comes with AMD’s motherboard. Attach it to the bottom of motherboard.
- Install the standoff screws onto your motherboard. Ensure to use the correct standoff screws for your CPU socket.
Parts Required: Standoff Screws (AMD or TR4)
- Please remove the retention module. AMD’s backplate comes with AMD’s motherboard. Attach it to the bottom of motherboard.
Install the Pump Unit
-
A. Choose your Mounting Bracket according to your CPU
Parts Required: Intel or AMD Mounting Brackets, Thumbscrew Cap, Thermal
-
B. Apply the Thermal Compound evenly on the CPU surface
-
C. Remove the protect film from the cold-plate
-
D. Install the water block and then tighten it with the Thumbscrews
Connection Cable s
Parts Required : PWM Fan Cable, ARGB Fan Cable, ARGB Water Block Cable,
Pump Cable
- If your M/B does not have an AIO_Pump, you can connect the 3 Pin to a fan header, but it is recommended to set the output to DC 12V.
ARGB One-Click Controller Installation
If your motherboard does not support ARGB effects, please use the included
ARGB One-Click Controller in order to use the 14 lighting modes.
Hold the button to turn on or off the lights. Tap the button to change the lighting modes.
InWin reserves the right to change the lighting modes.
Troubleshooting
- If your AIO pump or fan does not operate properly, please follow the instructions below：
- Please check your system’s power.
- Please make sure all the connectors are connected properly.
- For more technical support, please visit the InWin Forum website at https://forum.in-win.com/
Notices and Warranty
Notices
- Install in accordance with the user manual’s instructions and safety warnings. Incorrect installation may burnout the motherboard and other system components.
- Keep this product away from areas with high temperatures such as: heat dissipation machines, air conditioners or other machines which may generate high temperatures.
- Please do not put anything in the impeller.
- Do not modify the cables and/or connectors included with this product.
- Please do not put your hands or other objects into the fan blades when the fan is in operation. And please make sure to keep away from children and pets.
- Please only use this product in a computer case.
- Please keep this product away from any liquids.
- Please use only this product’s exclusively supplied cables. Other cables may not be compatible and could cause serious damage to your system and power supply
Warranty
- For more detailed warranty information, please visit the InWin retail website at www.in-win.com
- The actual product is subject to change without prior notice.
IN WIN DEVELOPMENT INC. reserves the right to make any final modifications.
Product Video Information
- NR Series Product Video
- NR Series Installation Video
Copyright © 2021 In Win Development Inc. All Rights Reserved.