denver VPL-230 USB Turntable Instruction Manual
- June 11, 2024
- Denver
Table of Contents
VPL-230
Instruction Manual
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
-
This product is not a toy. Keep it out of reach of children.
-
Keep product out of the reach of children and pets to avoid chewing and swallowing.
-
Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
-
Never open the product. Touching the inside electrics can cause electric shock.
Repairs or service should only be performed by qualified personnel. -
Do not expose to heat, water, moisture, direct sunlight!
-
Please protect your ears against loud volume. Loud volume can damage your ears and risk in hearing loss.
-
Bluetooth wireless technology operates within a range of about 10 m (30 feet).
The maximum communication distance may vary depending on the presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment. -
Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.
-
The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately.
-
The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.
-
Do not use non original accessories together with the product as this can make the product functionality abnormal.
PRODUCT OVERVIEW
- Dust cover
- Adapter – Use this when playing 45 RPM records
- Tone arm
- Tone arm lift
- Auto Stop ON/OFF switch
- Speed selection – Three speeds for choice: 33.3, 45 and 78 RPM.
- Cartridge
- Stylus
- Speaker
- Power switch / Volume control
- USB/SD/BT/REC/BT OUT-function mode button
- Next
- Pause/play/DEL button
- Previous
- USB port
- SD card slot
- Aux in
- Line out R channel
- Line out L channel
- DC power jack
SETUP & BASIC OPERATION
Power Connection
Make sure that operating voltage of the unit corresponds to your home mains
voltage. Your unit can be connected to a 5V DC adaptor.
Connecting to External Audio System
You can listen to your turntable using the built-in speakers but you may wish
to connect it to your existing audio system. Connect the audio plugs to the
Line input on your mixer or amplifier using an RCA cable (not supplied).
– Red plug into R channel input.
– White plug into L channel input.
Playing a Record
Place the record of your choice on the turntable. If required, do not forget
to place the 45 RPM adaptor on the record spindle.
Choose the desired playing speed using the speed selection switch between
33.3, 45 and 78 RPM. Turn on the Rotary Power Switch, note that this also
controls volume.
Release the tone arm lock.
Carefully raise the tone arm.
Place the stylus vertically over the first track of the record, the turntable
will start turning automatically.
Lower the tone arm slowly on to the record to play.
When a record comes to the end, the turntable will stop automatically if the
auto-stop switch is in the ON position. If the switch is in the OFF position
then it will keep revolving until the tone arm is returned to the tone arm
rest. Lift up the tone arm and replace it on the tone arm rest.
Replace the protective cap on the stylus and close the tone arm lock.
Turn off power.
USB/SD Recording
Place the record of your choice on the turntable. If required, do not forget
to place the 45 RPM record adapter on the record spindle.
Choose the desired playing speed using the speed selection switch between
33.3, 45 and 78 RPM. Turn on the Rotary Power Switch, note that this also
controls volume.
Release the tone arm lock.
Insert the USB or SD, press and hold the REC button, the flash of the LED
indicator besides the USB/SD connector shows that it has started recording.
When you stop the turntable or press REC button, or move the arm to LP, the
recording will stop.
USB/SD Playing
Turn on the power and insert the USB/SD and the unit will automatically play
music from USB flash or SD card.
If you are playing an LP, you need to move the tonearm back to stop the LP
music. USB/SD music will begin automatically if USB/SD is inserted. If BT is
on,press USB/SD
/BT/REC/BT OUT button to select USB/SD mode, wait for a few seconds, USB/SD
music playback will begin.
DEL: to delete the music which you have recorded from LP to USB/SD device,
press and hold the DEL button, this will delete the current playing music.
Turntable cannot delete music which is not recorded by the turntable.
Connect a Bluetooth Device to the Turntable
Press the USB/SD/BT/REC/BT OUT button to choose Bluetooth mode, a blue LED
will begin flashing to indicate the turntable is in pairing mode.
Search for the turntable (named “VPL-230”) in the list of Bluetooth devices
and connect. A chime and a steady blue LED light will indicate your device has
paired with the turntable successfully.
Connect the Turntable to an External Bluetooth Speaker
Play a record before turning on pairing mode on your bluetooth speaker. Press
the USB/SD/BT/REC/BT OUT button to choose bluetooth mode. The LED light will
flash to indicate the turntable is searching for an available bluetooth
speaker.
When the turntable connects to a Bluetooth speaker, the LED light stays lit.
After the speaker is paired successfully, turntable audio signal can be
transmitted to the Bluetooth speaker.
MAINTENANCE
REPLACING THE STYLUS
– Refer to the figures 1-8
Push the arm lock to release the tone-arm.| Remove cap of the cartridge to
expose the needle out.
---|---
|
Separate the cartridge from the socket lightly.| Remove the audio lines from
the cartridge comple tely.
|
To fit a new one, just proceed in the opposite order,insert the audio lines accordingly,and install the cartridge to the socket lightly.
NOTE:
Please exercise extreme care while performing this operation so as to protect
the tone arm and audio line wires from any damage.
INSTALLING A NEW STYLUS CARTRIDGE
– Refer to the figures 5 & 6
NOTES
We advise you to clean your records with an anti-static cloth to gain maximum
enjoyment from them and to make them have a longer service life.
We would also point out that for the same reason your stylus should be
replaced periodically (approximately every 250 hours).
Dust the stylus from time to time using a very soft brush dipped in alcohol
(brushing from back to front of the cartridge).
WHEN TRANSPORTING YOUR RECORD PLAYER DO NOT FORGET TO:
– Replace the protective cap on the stylus.
– Put the rest clip into the pick-up arm.
Please notice – All products are subject to change without any notice. We take
reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
denver.eu ****
Electric and electronic equipment contains materials, components and
substances that can be hazardous to your health and the environment, if the
waste material (discarded electric and electronic equipment) is not handled
correctly.
Electric and electronic equipment is marked with the crossed out trash can
symbol, seen above. This symbol signifies that electric and electronic
equipment should not be disposed of with other household waste, but should be
disposed of separately.
All cities have established collection points, where electric and electronic
equipment can either be submitted free of charge at recycling stations and
other collection sites, or be collected from the households. Additional
information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type VPL-230 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: denver.eu and then
click the search ICON on topline of website. Write model number: VPL-230. Now
enter product page, and RED directive is found under downloads/other
downloads.
BT Operating Frequency Range: 2.402GHz-2.480GHz
Max Output Power: 2 x 10 W / 2 x 1 W RMS
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
Contact
Nordics
Headquarter
Denver A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00
(Push “1” for support)
E-Mail For technical questions, please write to:
support.hq@denver.eu
For all other questions please write to:
contact.hq@denver.eu
Benelux
DENVER BENELUX B.V.
Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
Phone: 0900-3437623
E-Mail: support.nl@denver.eu
Spain/Portugal
DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, nº 23 – nave 16
Parque Tecnológico
46980 PATERNA
Valencia (Spain)| Spain
Phone: +34 960 046 883
Mail: support.es@denver.eu
Portugal: Phone: +35 1255 240 294
E-Mail: denver.service@satfiel.com
Germany
Denver Germany GmbH Service
Max-Emanuel-Str. 4
94036 Passau
Phone: +49 851 379 369 40
E-Mail support.de@denver.eu
Fairfixx GmbH
Repair and service
Rudolf-Diesel-Str. 3 TOR 2
53859 Niederkassel
(for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones & Tablets)
Tel.: +49 851 379 369 69
E-Mail: denver@fairfixx.de
Austria
Lurf Premium Service GmbH
Deutschstrasse 1
1230 Wien
Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at
If your country is not listed above, please write an email to
support@denver.eu
---|---
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
denver.eu
facebook.com/denver.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>