J-TECH DIGITAL V913 Ergonomic Mouse User Manual
- June 11, 2024
- J-TECH DIGITAL
Table of Contents
V913 Ergonomic Mouse
User Manual
Thank you for purchasing this mouse, please read the manual carefully before use to avoid unnecessary trouble.
Distribution map of functions
Mouse Usage
-
The mouse is in 2.4G mode, and you can choose to use IAA or AAA battery.
-
How to code:
Turn on the power switch, and press the middle right button for 3 seconds. When the LED on the bottom lights up red, please insert the receiver. After completing the code, the mouse will work normally. The factory default matching is completed. -
DPI Settings
There are 3 grades of DPI, 800-1200 (default) -1600. Short press the DPI button to cyclically switch DPI, 800DPI (the indicator flashes once, and then turns off) -1200DPI (the indicator flashes twice, and then turns off) – 1600DPI (the indicator flashes three times, and then turns off). DPI has no memory function. -
Report rate: 250Hz
-
Wake up the mouse: Default movement wakes up the mouse; no deep sleep.
-
Low voltage reminder: When the battery voltage is lower than 1.1V, the DPI switching indicator will flash to remind the user to replace the battery in time.
-
Working distance: 10M/32ft. 8.Compatibility: Compatible with Windows 7/8/10/MAC OS
WWW.JTECHDIGITAL.COM
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>