Yealink SIP-W60B Performance SIP Cordless Phone System User Guide
- June 11, 2024
- Yealink
Table of Contents
Yealink SIP-W60B Performance SIP Cordless Phone System
Yealink SIP-W60B End User Guide
REV. 02.24.2023
Introduction
The Yealink SIP-W60B is a desk phone that comes with a variety of features. This guide will help you get started with your new phone. For more information on the features, please reference the AirePBX Feature Guide at https://airespring.com/resources/resources-others/?d=guides.
Accessing the CommPortal
To configure your phone, log in at https://commportal.airespring.com/. Once you have logged in, select Devices and add the YealinkW60B.
Features
In this section, you can enable or disable Call Log.
Preferences
In this section, you can enable or disable Call Display, Display Method,
and Internal Ringer.
Handsets
In this section, you can configure which description type is displayed on
the handset by using directory number, extension, or custom description.
Registering a Handset
- Charge the W53H or W56H handset.
- On the base, hit the center button. The top light on the handset will start blinking.
- On the handset, hit the Reg button.
- The handset will register to the base, upload new firmware and install.
User Information and Voicemail
In this section, you can configure your user information (number, name, description) and voicemail.
Contact Us
If you need further assistance, please contact us at
888-389-2899 or email us at
[email protected].
Introduction
This guide will help you get up and running with your new desk phone. For an explanation of the listed features please reference the AirePBX Feature Guide at https://airespring.com/resources/resources-others/?d=guides.
Accessing the CommPortal
To configure phone, log in at https://commportal.airespring.com/
Once you login, select Devices and add the Yealink W60B
Once you access to the phone page, the following screen will display:
Features
In this section you may enable or disable Call Log.
Preferences
The Line Keys capabilities
In this section you’d be able to enable or disable Call Display, Display
Method and Internal Ringer
Handsets
In this section you will be able to configure which description type displayed
on the handset, by using directory number, extension or custom description.
To register a W53H or W56H handset to the base, charge the device and then register it to the base:
- On the Base hit the center button, the handset top light will start blinking
- On the handset hit the Reg button
- The handset will register to the base and will upload new firmware and install. A temporary error of that the base is not available may be displayed just prior to the firmware upgrade starting.
- Once complete Time & Date should be displayed with the Handset name at the bottom of the screen
- If multiple handsets (up to 8) need to be configured to theW60B base each will have to complete its firmware upgrade and come in-service prior to the next one being able attach to the base. Expect the process to take 5-10 minutes per handset.
- If multiple handsets get registered to the base they will assume sequential handset number from 1 to 8.
- While one of the handsets is firmware upgrading, all handsets on the W60B are non-operational. Attempting to use one will result in a “Other handset is upgrading!” message.
Lines 1 – 8
In this section you will be able to configure:
User’s information (Number, Name, Description) and Voicemail.
Contact us at: 888-389-2899
email :
[email protected]