Kanlux INITA LED Table Lamp User Manual
- June 11, 2024
- Kanlux
Table of Contents
INITA LED Table Lamp
User Manual 2022/11-1
A3-297x420mm/ISO216
www.kanlux.com
INITA LED Table Lamp
INTENDED USE / APPLICATION
Product for spotlighting and ornamental lighting. Touch switch with dimming possibility.
MOUNTING
Read the manual before mounting. Technical changes reserved. Mounting diagram: see pictures. Any activities to be done with disconnected power supply. Exercise particular caution. Product requires preparation before operating. “ON” means “switch/switched on” , “OFF” means “switch/switched off”.
FUNCTIONAL CHARACTERISTICS
Product can be used either indoors or outdoors. Turning the light on/off is done through a quick touch. Dimming / brightening is done through a longer touch.
USAGE GUIDELINES / MAINTENANCE
Clean only with soft and dry cloths. Do not use chemical detergents. Do not
cover the product. Ensure free air access. Product must not be used in
unfavourable environment, e.g. dust, moisture,water, vibrations, etc. Product
with non-replaceable light source of the LED type. Product cannot be fixed if
the light source becomes damaged. It’s forbidden to use the product with
damaged protective cover.
ATTENTION! Do not look directly at LED light beam. Non-demountable
product. Not suitable for independent repairs. The construction of the product
offers no resistance to specific conditions, e.g. due to the presence of
defrosting substances and salt atmosphere; oils, lubricants, solvents. Prevent
flooding of the device. In case of failure, the device should be replaced with
a new one.
EXPLANATIONS OF SYMBOLS USED
P1: Supply voltage.
P2: Maximum power of the light source.
P3: Colour temperature.
P4: Rated luminous flux.
P5: Dust-resistant product. Protection against splashing water provided.
P6: Product can be used either indoors or outdoors.
P7: Rated durability.
P8: Class III A product in which protection against electric shock is provided
by feeding it with very low safe voltage (SELV) with no risk of creating
higher than safe voltage.
P9: The symbol describes the minimal distance of a light fixture (its light
source) from the spots and objects that it’s illuminating.
P10: Environmental operating temperature range that the product can be exposed
to.
P11: Immediately stop using the product if the outer bulb is cracked or
broken.
P12: Product meets the requirements of EU directives.
P13: The product is compliant with all relevant United Kingdom regulations.
P14: Certificate of Conformity confirming the quality of production in
accordance with approved standards on the territory of the Customs Union.
P15: The product meets the requirements of technical regulations applicable in
Ukraine.
ENVIRONMENTAL PROTECTION
Segregation of post-packaging waste is recommended.
P16: This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralising. Keep your environment clean. The
labelling indicates the requirement to selectively collect waste electronic
and electrical equipment, as well as all kinds of batteries. Products labelled
in this way must not be disposed of in the same way as other waste under the
threat of a fine. Products labelled in this way should be returned to a
collection facility for waste electrical and electronic goods. Used batteries
and/or accumulators need to be treated as separate waste and placed in an
individual container. Used batteries and/or accumulators should be returned to
a collection facility for waste batteries/accumulators. Information on
collection centres is provided by local authorities or sellers of such goods.
The above rules regard the EU area. In the case of other countries,
regulations in force in a given country must be applied. Contacting the
distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com. Kanlux S.A. shall not be responsible
for any damage resulting from the failure to follow these instructions. Kanlux
SA reserves the right to make changes in the manual – the current version can
be downloaded at www.kanlux.com.
The accumulators are covered by a one-year warranty.
INITA LED
No charger included (5V DC) 
Rechargeable batteries are only to be charged under adult
supervision. Batteries contain substances that may be harmful to the
environment and human health. Keep out of reach of children and seek immediate
medical help if swallowed, chemical urns may arise from ingestion. Never throw
batteries in a fire or attempt to open the outer casing. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>