JVC HAA7T2W Wireless Headphone User Manual
- June 11, 2024
- JVC
Table of Contents
JVC HAA7T2W Wireless Headphone
Product Information
- Model: HA-A7T2 / HA-Z77T
- Manufacturer: JVCKENWOOD Corporation
- Address: 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN
- Compliance:
- FCC Rules Part 15
- ISED Canada’s license-exempt RSS(s)
- FCC/ISED radiation exposure limits
- European directives and standards regarding Radio and RoHS
- Recyclable rechargeable battery
Product Usage Instructions
- Enter the Model No. and Serial No. (on the charging case) below. Retain this information for future reference.
- Charge the rechargeable battery before first use.
- Pair the earbuds with a Bluetooth-enabled device by following the device’s Bluetooth pairing instructions.
- Once paired, put on the earbuds and adjust for a comfortable fit.
- Control music playback, answer or end calls, and activate voice assistant by using the touch controls on the earbuds.
- When not in use, store the earbuds in the charging case to keep them charged and protected.
- If experiencing any issues, refer to the user manual for troubleshooting steps or contact customer support.
Declaration of Conformity
Supplier’s Declaration of Conformity
- Model Number: HA-A7T2
- Trade Name: JVC
- Responsible party: JVCKENWOOD USA Corporation
- Address: 1440 Corporate Drive, Irving, TX 75038
- Telephone Number: 678-449-8879
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
- IC: 23340-A7T2
- FCC ID: 2ADZH-A7T2
ATTENTION:
- The product you have purchased is powered by a rechargeable battery that is recyclable.
- Please call 1-800-8-BATTERY for information on how to recycle this battery.
For Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
For U.S.A. and Canada
This equipment complies with FCC/ISED radiation exposure limits set forth
for an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure
rules as this equipment has very low levels of RF energy.
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding Radio and RoHS. European representative of JVCKENWOOD
Corporation is:
JVCKENWOOD Deutschland GmbH, Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY.
This apparatus is in conformance with the valid United Kingdom Regulations and
standards regarding Radio and RoHS. United Kingdom representative of
JVCKENWOOD Corporation is:
JVCKENWOOD U.K. Limited, First Floor, Gleneagles, the Belfry, Colonial Way,
Watford, Hertfordshire WD24 4WH, UNITED KINGDOM
Hereby, JVCKENWOOD declares that the radio equipment [HA-A7T2 / HA-Z77T] is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the
following internet
address: (https://www.jvc.net/euukdoc/).
For the United Kingdom
Hereby, JVCKENWOOD declares that the radio equipment [HA-A7T2 / HA-Z77T] is in
compliance with the relevant statutory requirements. The full text of the
declaration of conformity is available at the following internet address:
(https://www.jvc.net/euukdoc/).
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)
- Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste. This product contains a rechargeable battery. Contact JVCKENWOOD’s authorized dealer for disposal.
WARNING
- Do not listen at high volume for an extended period. Do not u se it while driving or cycling.
- Pay special attention to the traffic around you when using the headphones outside. Failure to do so could result in an accident.
- This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
- This product contains a rechargeable battery, which is not replaceable. The danger of explosion if the user replaced the battery. Do not replace the battery user’s own self.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Warnings for battery
Please do not handle the battery in the following manners.
It can lead to an explosion or leakage of flammable liquids and gases.
- Dispose of in fire, discard, crush, or cut
- Leave in an extremely high-temperature environment
- Leave in an extremely low-pressure environment
BLUETOOTH SPECIFICATION
- Frequency range: 2.402 GHz – 2.480 GHz
- Output power: +2.8 dBm (MAX), Power Class 1
For U.S.A. (HA-A7T2 only)
Hearing Comfort and Well-Being
- Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play.
- If you experience a ringing in your ears, reduce the volume or discontinue use.
Traffic Safety
- Do not use it while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
- You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
- Do not turn up the volume so high that you cannot hear the sound around you.
How To Use
Before using, make sure to remove the insulating sheet and charge.
Indicators
During charging, the indicators flash. When charging is complete, all indicators light up.
- Charging time: Approx. 3.5 hours (when charging the earphones and charging case at the same time)
Turn on the BLUETOOTH function on the BLUETOOTH device, select this unit from the device list, and perform the connection.
Ensure the “JVC” logo is on the upper side, and fit it to your ear by adjusting the position.
Operation
Audio operation
After using the earphones, place them back into the charging case.
Phone operation
For detailed operations such as phone call, troubleshooting and information on the European Guarantee, please refer to the user manual.
- https://manual3.jvckenwood.com/accessory/headphones/global/.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>