Kanlux BLINGO R/RU Recessed Mounted LED Panel Instruction Manual

Kanlux BLINGO R/RU Recessed Mounted LED Panel Instruction

Product Information

• Model: BERLINGO R/RU
• Dimensions: A3-297x420mm/ISO216
• Brand: Kanlux
• Power: P1 220-240V~ 50Hz
• Light Source: LED
• Color Temperature: 4000K (BLINGO NW)
• Color Rendering Index (CRI) : 80
• Luminous Flux: P4 4560lm, P9 3800lm
• Lifetime: P5 50000h
• IP Rating: IP20

Product Usage Instructions

1. Ensure the power supply is switched off before installation.
2. Mount the BINGO R/RU on a suitable surface using the provided mounting accessories.
3. Connect the wires according to the L, PE, and N labels, using wires with a cross-section of 1-2.5mm2.
4. Switch on the power supply to activate the light.
5. To adjust the direction of the light, rotate it to the desired position.
6. To turn off the light, switch off the power supply.
7. Maintain the BINGO R/RU by wiping it with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.

INTENDED USE / APPLICATION

Product for lighting office spaces and for general use.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with
disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior
to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. Product has a protective contact/terminal.Failure to connect the protective lead may lead to electric shock.

FUNCTIONAL CHARACTERISTICS
Product for indoor use.

USAGE GUIDELINES / MAINTENANCE

Replacing the light source in the housing is impossible. If the light source is damaged replace the entire housing. Any maintenance work must be performed when the
power supply is cut off and the product has cooled down. Clean only with soft and dry clothes. Do not use chemical detergents. Do not cover the product. Ensure free air
access. The product may heat up to a higher temperature.

ATTENTION! Do not look directly at the LED light beam. The product can only be supplied by rated voltage or voltage within the range provided. The product must not be used in an unfavourable environment, e.g. dust, moisture, water, vibrations, etc.

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, and frequency.
• P2: Rated power.
• P3: Rated luminous flux.
• P4: Rated luminous flux. The specified luminous flux refers to the light source (LED module) used.
• P5: Rated durability.
• P6: Colour Rendering Index.
• P7: Colour temperature.
• P8: Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which a protective conductor of the fixed feeding installation needs to be connected.
• P9: Viewing angle.
• P10: Protection against solid foreign objects bigger than 12mm provided.
• P11: Use only indoors.
• P12: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
• P13: The product is not compatible with lighting dimmers.
• P14: Product meets the requirements of EU directives.
• P15: The chipped globe, screen or protective shield must be replaced immediately.
• P16: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
• P17: Caution, risk of electric shock.
• P18: The product is compliant with all relevant United Kingdom regulations.
• P19: This product is equipped with a light source with energy efficiency class E
• P20: The LED light source can only be replaced by qualified personnel (Kanlux service only).
• P21: Any control panel or control equipment can only be replaced by qualified personnel (Kanlux service only).
• P22: The product meets the requirements of technical regulations applicable in Ukraine.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended.  P23: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about
Kanlux SA products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves
the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

WHAT’S IN THE BOX

INSTALLATION INSTRUCTION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>