Kanlux 36461 Ceiling Mounted LED Light Fitting RIFA LED Instruction Manual
- June 11, 2024
- Kanlux
Table of Contents
Kanlux 36461 Ceiling Mounted LED Light Fitting RIFA LED
Product Information:
- Model: 2022/03-1
- Size: A3-297x420mm/ISO216
- Brand: RIFA LED
- Power Consumption: 17.5W
- Luminous Flux: 1500lm
- Color Temperature: 4000K (P13) or 3000K (P14)
- Lifespan: 25000h
- IP Rating: IP20
What’s In The Box
Product Usage Instructions
- Ensure that the power supply is compatible with the product’s input voltage of 220-240V~ 50Hz (P6).
- Install the product in a suitable location with sufficient space for ventilation and access to the power source.
- Connect the product to the power supply using an appropriate cable with a length of no more than 0.5m (P16).
- Turn on the power supply and switch on the product using the relevant switch or control mechanism.
- The product emits a luminous flux of 1500lm (lm), providing bright and efficient lighting.
- The product has a color temperature of either 4000K (P13) or 3000K (P14), depending on the selected model, providing a warm and natural lighting environment.
- The product has a long lifespan of up to 25000h, reducing the need for frequent replacement and maintenance.
- The product has an IP20 rating, making it suitable for indoor use only.
INTENDED USE / APPLICATION
Product designed for use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. The product has a
protective contact/terminal. Failure to connect the protective lead may lead
to electric shock. Mounting diagram: see pictures. Check for proper mechanical
fastening and connection to electrical power prior to first use. The product
can be connected to a supply network that meets energy quality standards as
prescribed by law.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Energy efficient light sources can be used in this
product.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the
product has cooled down. Clean only with soft and dry clothes. Do not use
chemical detergents. Do not cover the product. Ensure free air access. The
product may heat up to a higher temperature. Product with a non-replaceable
light source of the LED type. The product cannot be fixed if the light source
becomes damaged. ATTENTION! Do not look directly at LED light beam. The
product can only be supplied by rated voltage or voltage within the range
provided. It’s forbidden to use the product with a damaged protective cover.
Product must not be used in unfavorable conditions, e.g. dust, water,
moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
EXPLANATIONS OF SYMBOLS USED
- P1: Rated voltage, and frequency.
- P2: Rated power.
- P3: Rated luminous flux.
- P4: The specified luminous flux refers to the light source (LED module) used.
- P5: This product is equipped with a light source with energy efficiency class “E”
- P6: Rated durability.
- P7: Colour temperature.
- P8: Viewing angle.
- P9: Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which the protective conductor of the fixed feeding installation needs to be connected.
- P10: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- P11: Protection against solid foreign objects bigger than 12mm provided.
- P12: Use only indoors.
- P13: The product can only be used in a lighting fixture with protective glass. The chipped globe, screen or protective shield must be replaced immediately.
- P14: Product meets the requirements of EU directives.
- P15: The product is not compatible with lighting dimmers.
- P16: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
- P17: The product is compliant with all relevant United Kingdom regulations.
- P18: The product meets the requirements of technical regulations applicable in Ukraine.
- P19: The LED light source can only be replaced by qualified personnel (Kanlux service only).
- P20: Any control panel or control equipment can only be replaced by qualified personnel (Kanlux service only).
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P21: This labeling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labeled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralizing. Products labeled in this way should be
returned to a collection facility for waste electrical and electronic goods.
Information on collection centres is provided by local authorities or sellers
of such goods. Used items can also be returned to the seller when new product
is purchased, in quantity no larger than the purchased item of the same type.
The above rules regard the EU area. In the case of other countries,
regulations in force in a given country must be applied. Contacting the
distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com. Kanlux SA shall not be responsible
for any damage resulting from the failure to follow these instructions. Kanlux
SA reserves the right to make changes in the manual – the current version can
be downloaded at www.kanlux.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>