Kanlux 33365 LCOB LED Tape Instruction Manual
- June 11, 2024
- Kanlux
Table of Contents
Kanlux 33365 LCOB LED Tape
Product Information
- Model : LCOB
- Dimensions : A3-297x420mm/ISO216
- Color Temperature : 3000K and 4000K
- IP Rating : IP00 and IP65
- Power Supply : 220-240V 50Hz / 12V DC
- Rated Lifespan : 30,000 hours
Product Usage Instructions
Installation
- Ensure that the installation location is suitable for the product.
- Connect the power supply to the product using the provided cables, following the wiring diagram.
- Securely mount the product in the desired location using appropriate hardware.
- Test the product to ensure it is functioning properly.
Operation
- Ensure that the power supply is connected and the product is securely mounted.
- The product can be turned on and off using the supplied power switch.
- The product emits light in a 360-degree pattern and can be adjusted to different distances for optimal lighting.
- The product has a rated lifespan of 30,000 hours.
Maintenance
- Regularly inspect the product for any damage or wear.
- Clean the product as needed using a soft, dry cloth.
- Do not use abrasive cleaners or solvents on the product.
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Do not cover the product. Product must not be used in unfavourable environment, e.g. dust, moisture,water, vibrations, etc. Product with non-replaceable light source of the LED type. Product cannot be fixed if the light source becomes damaged. ATTENTION! Do not look directly at LED light beam. Product may heat up to a higher temperature
INTENDED USE / APPLICATION
Specialist product – for professional use.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. The end parts of the leads must be isolated at the right length. Pay particular attention to proper bias (‘+’ – POSITIVE, ‘–’ – NEGATIVE). Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. Linking LED strips into a section exceeding 5 m is not permitted. Applications requiring longer sections should be electrically divided (connected in parallel) into sections not exceeding 5 m in length.
EXPLANATIONS OF SYMBOLS USED
- P1 : Rated voltage.
- P2 : Rated power.
- P3 : Colour temperature.
- P4 : Rated luminous flux.
- P5 : Rated durability.
- P6 : Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
- P7 : No protection.
- P8 : Dust-proof product. Protection against water jets provided.
- P9 : Use only indoors.
- P10 : Class III. A product in which protection against electric shock is provided by feeding it with very low safe voltage (SELV) with no risk of creating higher than safe voltage.
- P11 : The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- P12 : Product meets the requirements of EU directives.
- P13 : The product is compliant with all relevant United Kingdom regulations.
- P14 : The product meets the requirements of technical regulations applicable in Ukraine.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. P15: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/ neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>