Kanlux LARATA E27 Table Lamp Black Instruction Manual

Kanlux LARATA E27 Table Lamp Black

WHAT IN THE BOX

DIMENSION

FEATURES

POWER

PRECAUTION

Product Information

• Product Name: LARATA E27
• Model Number: 2022/07-1
• Size: A3-297x420mm/ISO216
• Brand: Kanlux
• Input Voltage: 220-240V~
• Frequency: 50Hz
• Maximum Power: 5W LED
• Lamp Holder: E27
• Protection Rating: IP20
• Intended Use/Application: Product designed for indoor use in homes and other similar general applications.

Product Usage Instructions

1. The product is designed for indoor use only.
2. The product can be connected to a supply network which meets energy quality standards as prescribed by law.
3. Mounting should be performed by an appropriately qualified person.
4. Check for proper mechanical fastening and connection to electrical power prior to first use. Read the manual before mounting.
5. Any activities to be done with disconnected power supply. Exercise particular caution.
6. The product must not exceed the maximum load power as shown in the pictures.
7. The product can be used with energy-efficient light sources.
8. Maintain the product by following the usage guidelines provided in the manual to prevent fire, burns, electrical shock, physical injury, and other material and non-material damage.

For more information about Kanlux products, visit their website at www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

INTENDED USE / APPLICATION

Product designed to be used in the home and for other similar general applications.

MOUNTING

Mounting should be performed by an appropriately qualified person. Check for proper mechanical fastening and connection to electrical power prior to first use. Technical changes reserved. Read the manual before mounting. Any activities to be done with disconnected power supply. Exercise particular caution. The product can be connected to a supply network which meets energy quality standards as prescribed by law. Do not exceed the maximum load power: see pictures.

FUNCTIONAL CHARACTERISTICS

Product for indoor use. Energy efficient light sources can be used in this product.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be done when the product is disconnected from power supply. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Product may heat up to a higher temperature. Adjustment of lighting direction and/or replacement of the light source must be done when the product has cooled down. Replacement of light source to be performed after the product cools down: see pictures. Product can only be supplied by rated voltage or voltage within the range provided. Light sources with parameters provided in the manual must be used in the product. If the cord isolation or casing is damaged, the product cannot be used. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, frequency.

• P2: Maximum power.

• P3: Base/holder.

• P4: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.

• P5: Protection against solid foreign objects bigger than 12mm provided.

• P6: Product meets the requirements of EU directives.

• P7: Use only indoors.

• P8: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.

• P9: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.

• P10: LED lamp.

• P11: The product is compliant with all relevant United Kingdom regulations.

• P12: The product meets the requirements of technical regulations applicable in Ukraine.
  ENVIRONMENTAL PROTECTION
  Keep your environment clean. Segregation of post-packaging waste is recommended.

• P13: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/ neutralising. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type.

COMMENTS/GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com

Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

References

• emploi.La

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>