EMEET HS80 GeniusCall Wireless Headphone User Manual

EMEET HS80 GeniusCall Wireless Headphone

WHAT IN THE BOX

Overview

Safety Guide

Caution
To avoid electrical shock, do not open the housing of this product. In addition, users do not need to use the product’s internal parts. To repair the product, please contact qualified maintenance personnel or mail the product to our after-sales department.

1. Please read this guide carefully.
2. Please keep this guide.
3. Please observe all warnings.
4. Please follow all instructions.
5. When cleaning this product, use a dry cloth only.
6. Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
7. Do not out this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifers) that produce heat.
8. Do not use this product if you must remain alert of your surroundings, for example, while driving a car or riding a bike.
9. Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such as swimming or surfing
10. Please protect the power cable and audio cable. Do not step on or apply pressure on them. Do not pull on theproduct’s plug, socket, or cable outlet.
11. It is recommended that users use the accessories that have been specified by the vendor.
12. Do not expose the batter to environments with excessive heat, such as direct sunlight or sources of fire.
13. Connect a power supply within the specified voltage range.
14. If a power cable that is connected to the product is not currently being used to charge the product please disconnect the power cable from the port and shut off the power supolv.
15. To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, if the power cable or plug is damaged, liguid has flowed into the product an obiect has fallen into the product the product has come into contact with rain or moisture, the product cannot operate properly, or if the product has fallen.

NOTE

• The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Operation instructions

Power on/off

•  Press and hold the power/Bluetooth button for 2 seconds to power turn on the device.
  Press and hold the button for another 2 seconds to power turn off the device.

Connection and Pairing

Connect to a PC

• Insert the MEET Adapter A351 attached to the device into your PC’s USB port to operate.
• Connect the headset with a USB cable, and insert the other end of the USB cable into your PC’s USB port. The headset serves as a wired one.

Pair with a smartphone

• Press the power/Bluetooth button twice until the indicator flashes blue and a prompt sound is heard from the headset.
• Select “EMEET GeniusCall HS80” from the list of Bluetooth devices to connect with it.

Wearing

• You can wear the headset with the boom on either side (left or right). Pull the boom to the bottom to switch between the left and right channels.
• You can mute or unmute the MIC during a call by moving the boom. (Note: The indicator remains unchanged when the MIC is muted or unmuted)

Charging

• To charge the headset, connect the charging base to a power source through a USB cable, then place the headset on the charging base
• Connect the headset to a power source through a USB cable. The power indicator blinks green during charging and turns off when the headset is fully charged.
• When the battery’s remaining power is insufficient to support a 10-minute operation, the indicator on the headset blinks red rapidly and turns off 5 seconds later.

Button Operation Instructions

LED Indicator

Download Application

Please visit www.emeet.com/EMEETLINK to download the EMEETLINK PC desktop app for software updates and other user- defined operations.
Note: The device can operate normally even if EMEETLINK is not downloaded.

Regulatory Compliance Information

EU/UKCA Compliance:
Hereby, SHENZHEN MEET TECHNOLOGY CO.,
LTD. Corporation declares that the radio equipment is in compliance with <Directive 2014/53/EU/RER 2017 (SI 2017/1206)>. A copy of the EU/UK Declaration of Conformity is available at http://www.emeet.ai/Certificate.html

1. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.
2. If you use a third-party charger, therecommended output voltage/current of the adaptor is 5Vdc/1A., and the adapter shall be CE/UKCA approval type.
3. It is recommended to charge the product in an environment with a temperature that ranges from 5 C ~ 25 C.
4. Caution risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
5. Frequency: 2.4GHz (Bluetooth®)
6. Maximum Power:: <100mW
7. The suitable temperature for the product and accessories is 0~40 C.
8. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
9. Excessive sound pressure from earphones and headphones can cause hearing loss.

ISED Canada compliance

1. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2. This device complies with Industry Canada license-exempt RSS standard (s). Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard (s).
3. Operation is subject to the following two conditions:
   • this device may not cause inte rference, and
   • this device must accept any interference, including interference that may cause undesired operation of the device. Son fonctionnement est soumis aux deux conditions suivantes;
4. This equipment is portable device. The output power of this device is less than 20mW. The SAR test is not required.

IMDA Compliance:
Complies with IMDA Standards DA107974

FCC Compliance

The device has been evaluated to meet general RF exposure requirement; The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement. Power is so low that no RF exposure calculation is needed.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for helo.

+ 1 888 959 5320 (EST 9:00am-5:00pm)
[email protected]
www.emeet.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>