Kanlux DABA PRO Ceiling Mounted LED Light Fitting User Manual

Kanlux DABA PRO Ceiling Mounted LED Light Fitting

Product Information

• Product Name: DABA PRO
• Model Number: P1 to P22
• Dimensions: A3-297x420mm/ISO216
• Manufacturer: Kanlux
• Light Source: LED
• Power Supply: 220V-240V~ 50Hz
• Power Consumption: 25W
• Luminous Flux: 2800lm to 3600lm
• Color Temperature: 4000K
• Rated Life: Tc 50000h
• Ingress Protection Rating: IP65
• Impact Protection Rating: IK10
• Minimum Distance from Illuminated Object: 0.5m
• Operating Temperature: Ta

For more information, visit the manufacturer’s website at www.kanlux.com.

Product Usage Instructions

1. Select a suitable location for the DABA PRO to be mounted, ensuring that it is at least 0.5m away from any illuminated object.
2. Ensure that the power supply is compatible with the DABA PRO’s power requirements.
3. Mount the DABA PRO securely using appropriate hardware.
4. Connect the power supply to the DABA PRO.
5. Turn on the power supply and switch on the DABA PRO using the appropriate switch or control mechanism.
6. Adjust the direction of the DABA PRO as needed to achieve the desired lighting effect.
7. To turn off the DABA PRO, switch off the power supply or use the appropriate switch or control mechanism.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. The end parts of the leads must be isolated at the right length. If the wire ends are galvanized: cut off the galvanized wire ends, remove the wire insulation at the length of 8 mm, fix the wire in the terminal block. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

Product can be used either indoors or outdoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
Replacing the light source in the housing is impossible. If the light source is damaged replace the entire housing.

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, frequency.
• P2: Rated power.
• P3: Rated luminous flux.
• P4: The specified luminous flux refers to the light source (LED module) used.
• P5: This product is equipped with a light source with energy efficiency class D
• P6: Rated durability.
• P7: Colour temperature.
• P8: Dust-proof product. Protection against water jets provided.
• P9: Protection against mechanical impact with energy = 20J.
• P10: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
• P11: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
• P12: Product can be used either indoors or outdoors.
• P13: Viewing angle.
• P14: The chipped globe, screen or protective shield must be replaced immediately.
• P15: Product meets the requirements of EU directives.
• P16: Environmental operating temperature range that the product can be exposed to.
• P17: Caution, risk of electric shock.
• P18: The product is compliant with all relevant United Kingdom regulations.
• P19: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
• P20: The product meets the requirements of technical regulations applicable in Ukraine.
• P21: The LED light source can only be replaced by qualified personnel (Kanlux service only).
• P22: Any control panel or control equipment can only be replaced by qualified personnel (Kanlux service only).

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended.
P23: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended. Used batteries and/or accumulators need to be treated as separate waste and placed in an individual container. Used batteries and/or accumulators should be returned to a collection facility for wastebatteries/accumulators.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com.
Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

WHAT IN BOX

INSTALLATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>