FUFU GAGA LJY-KF020347-01 Modern Composite Hall Tree Instructions
- June 11, 2024
- FUFU GAGA
Table of Contents
LJY-KF020347-01 Modern Composite Hall Tree
Instructions
LJY-KF020347-01 Modern Composite Hall Tree
IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this
product. follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES!
In order to avoid scratching this furnuture should be assembled on a soft
layer-could be a rug. IMPROVE EFFICIENCY !
Try to find a partner to install with you, which can speed up the installation
efficiency and shorten the time. ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is
re-tightened 2 weeks after assembly, and once every 3 months – in order to
assure stability through-out the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use
a rag dipped in neutral detergent to fully wipe it, and then dry it with a
clean rag. For glass materials, wipe with a rag dampened with water glass
cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when
installing, because the board is easy to break.
| When installing, please carefully confirm whether each screw corresponds to
the manual, accessories
with similar shapes can be distinguished by size
---|---
WARNING
| Children have died from furniture tipover. To reduce the risk of furniture
tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.
This is a permanent label.
Do not remove!
Insert quickfit screw(A) into corresponding holes in plate 4,5 and 6 with a
screwdriver as shown.Insert wooden dowel(C) into two plate 4 at
first. Attach plate 5 and 6 respectively to plate 4, put cam lock(B) into
holes in plate 5,6 and turn clockwise to tighten as shown.Insert wooden dowel(C) into plate 3 at first.
Attach plate 2 to plate 3, and fix with screw(E) as shown.Insert wooden dowel(C) into plate 2 and 3 at first.
Attach plate 5 and 6 to plate 2 and 3, put cam lock(B) into holes in plate 2,3
and turn clockwise to tighten as shown.Slide plate 22 along
grooves as shown.Insert wooden dowel(C) into plate 1 at first.
Cover plate 1 to plate 5 and 6, fix with screw(E) as shown.Put nut(L) into plate 2, then insert quickfit screw(A) into nuts.
Attach plate 7 to plate 2, put cam lock(B) into holes in plate 7 and turn
clockwise to tighten as shown.![FUFU GAGA LJY-KF020347-01 Modern Composite Hal
- fig 15](https://manuals.plus/wp-content/uploads/2023/05/FUFU-GAGA-LJY-
KF020347-01-Modern-Composite-Hal-fig-15.jpg)Slide plate 23 along grooves as
shown.Insert quickfit screw(A) into corresponding
holes in plate 8 with a screwdriver as shown. Flip the plate, insert quickfit
screw(A) as well.Insert wooden dowel(C) into plate 8 at first.
Attach plate 8 to plate 5,7 and 6, put cam lock(B) into holes in plate 7 and turn clockwise to tighten as shown.
Fix plate 8 with screw(E) as shown.Insert quickfit screw(A) into corresponding holes in plate 9,10,14 and 15 with a screwdriver as shown.Fix plate 18 to plate 19 with screw(E) as shown. Attach the part to plate 14, put cam lock(B) into holes in plate 18,19 and turn clockwise to tighten as shown.Insert wooden dowel(C) into plate 14 at first. Attach plate 11 and 12 to plate 14, and fix with screw(E) as shown.Insert wooden dowel(C) into plate 14 at first.
Attach plate 9 and 10 to plate 14, put cam lock(B) into holes in plate 14 and turn clockwise to tighten as shown.Insert wooden dowel(C) into plate 15 at first. Attach plate 16 and 17 to plate 15, put cam lock(B) into holes in plate 16,17 and turn clockwise to tighten as shown.Insert wooden dowel(C) into plate 15 at first. Attach plate 15 to plate 14, put cam lock(B) into holes in plate 14 and turn clockwise to tighten as shown.
Fix plate 16 and 17 to plate 9 and 10 with screw(D) as shown.Slide plate 24 along grooves as shown. Insert wooden dowel(C) into plate 9,10, 11 and 12 at first.Connect the two components, put cam lock(B) into holes in plate 9,10,11,12 and turn clockwise to tighten as shown.Fix part(N) to plate 1 with screw(O) as shown.
Insert part(J) into plate 11 and 12, then place shelf 13 in.Fix hinge(H) to another plate 21 with screw(F) as shown.Attach plate 20 to plate 9 by fixing hinge(G) with screw(F) as shown.
Attach plate 21 to plate 12 by fixing hinge(H) with screw(F) as shown.
Attach plate 21 to plate 10 by fixing hinge(G) with screw(F) as shown.Fix hook(M) to plate 2 with screw(F) as shown.
Fix handle(I) to door plate with screw(F) as shown.Install anti- tipping device as shown.
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.
Version:02/15/2023