FUFU GAGA LJY-KF250018-05 Contemporary Modern Gray Buffet Instruction Manual
- June 11, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA LJY-KF250018-05 Contemporary Modern Gray Buffet
Product Information
The Sid eb oar d is a furniture product that requires assembly. It comes with various screws, wooden dowels, and cam locks to be used during assembly. The product has a label warning against tipping over and causing serious or fatal injuries. The product also comes with a tip-over restraint to be installed during assembly. The product should not be used to hold a TV and children should not climb or hang on drawers, doors, or shelves. The heaviest items should be placed in the lowest drawers.
Product Usage Instructions
- Read the entire manual before starting the assembly process.
- Assemble the product on a soft surface such as a rug to avoid scratches.
- Prepare the necessary tools and screws for assembly as listed in the manual.
- Confirm that each screw corresponds to the manual during installation.
- Install the tip-over restraint provided to prevent tipping over.
- Never put a TV on the product and never allow children to stand, climb or hang on drawers, doors, or shelves.
- Open only one drawer at a time and place the heaviest items in the lowest drawers.
- Follow each step of the instructions carefully during assembly.
IMPORTANT INFORMATION!
- please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES!
- In order to avoid scratching this furniture should be assembled on a soft layer-could be a rug.
IMPROVE EFFICIENCY!
- Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING!
- Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fit your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
IMPORTANT!
- It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months – in order to assure stability throughout the lifespan of the product.
- For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
- Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
- Please prepare the following tools
- When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size.
TOOLS
PARTS
WARNING
- Children have died from furniture tipover.To reduce the risk of furniture tipover:
- ALWAYS install tipover restraint provided.
- NEVER put a TV on this product.
- NEVER allow children to stand,climb or hang on drawers,doors,or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
- This is a permanent label. Do not remove!
INSTALLATION INSTRUCTION
-
Insert quickfit screw(A) into plate 4 with a screwdriver as shown.
-
Insert quickfit screw(A) into plate 5 with a screwdriver as shown.
-
Insert one wooden dowel(C) into one side of plate 7 at first, and attach to plate 4, put cam lock(B) into holes in plate 7 and turn clockwise to tighten as shown. Connect plate 5 with plate 7 and then fix using screw(E) as shown.
-
Insert quick fit screw(A) into plate 3 with a screwdriver as shown.
-
Insert wooden dowel(C) into both sides of plate 6 at first, and attach to plate 3 and 5, put cam lock(B) into holes in plate 6 and turn clockwise to tighten as shown.
-
Insert quickfit screw(A) into corresponding holes in plate 1 at first.
-
Fix part(N) to plate 1 using screw(R) as shown.
-
Insert wooden dowel(C) into plate 3,5 and 4 at first, and attach to plate 1, put cam lock(B) into holes in plate 3,4,5 and turn clockwise to
tighten as shown. -
Insert wooden dowel(C) into plate 3,5 and 4 at first. Cover plate 2 and fix using screw(E) as shown.
-
Fix leg(F) and leg support(G) to plate 2 using screw(H) as shown.
-
Fix back plate 8 and 9 using screw(M) at first. Fix the two plates together using part(L) with screw(M) as shown.
-
Please note, here are two different types of hinges in this step.
-
Fix hinge(J) to plate 11 using screw(K) as shown. Fix hinge(Q) to plate 12 using screw(K) as shown.
-
Fix plate 11 to plate 5 using screw(K) as shown. Fix plate 12 to plate 4 using screw(K) as shown.
-
Please note, here are two different types of hinges in this step.
-
Fix hinge(J) to another plate 12 using screw(K) as shown. Fix hinge(Q) to another plate 11 using screw(K) as shown.
-
Fix plate 11 to plate 3 using screw(K) as shown. Fix plate 12 to plate 5 using screw(K) as shown.
-
Insert part(D) into plate 3,4 and 5 at first, then place shelf 10 in.
-
Install anti-tipping device(S) as shown.
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
If you receive an order with obvious shipping damage from the retailer, then
we suggest the delivery is refused. If the delivery has been accepted and then
shipping damage is found, please follow the specific instructions advised by
the retailer.
In all circumstances please save all packaging material and paperwork for the
order. Please be aware that if you dispose of packaging material or attempt to
return the merchandise without contacting the fulfiller, you jeopardise your
chances of making a claim, and you may not receive a credit for the return.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>