chicco NeXt 2 me Dream Crib User Guide

: June 11, 2024
: chicco

Table of Contents

chicco NeXt 2 me Dream Crib
PRODUCT DESCRIPTION
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTION
COMPONENTS
ASSEMBLY OF THE CRIB
ADJUSTING THE CRIB HEIGHT
BEDSIDE SLEEPER CONFIGURATION
CARE AND MAINTENANCE
HOW TO REMOVE THE FABRIC COVER
ROCKING CONFIGURATION
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

chicco NeXt 2 me Dream Crib

chicco-NeXt-2-me-Dream-Crib-product

PRODUCT DESCRIPTION

The product is a Chicco Next2me Dream baby crib. It comes with various components, including:

A. Leg support with wheels
A1. Height adjustment button
A2. Rocking skid
A3. Height indicator
A4. Foot rotation unlock button
AT 5. Adjustable feet
A6. braked wheels
A7. Skid deactivation button
AT 8. Traverse housing
B.Upper structure
B1. Fixed structure
B2. Movable structure
B3. Leg attachment
C. Central structure
C1. central structure
C2. Gray fastening buckles
C3. Red fastening buckles
D. Fixing straps
D1. Red anchoring buckles
E.Textile covering
E1. Ribbon with clip
E2. pocket
E3. Textile unfastening zip
E4. Mesh windows
E5. Rigid flaps for fixing textiles to the upper structure
F. Removable mattress
G. Lower traverse
H. Bag

Product Usage Instructions

Before using the product, remove the plastic cover to avoid suffocation risks. Destroy or keep the plastic cover away from the reach of infants and children.

It is important to avoid objects that may pose a suffocation or strangulation risk, such as ropes, curtains, or similar items. Do not give the baby or put objects with ropes near the baby to avoid strangulation risks.

Assembly of the crib:

Hold the leg support A and slide the outer tube upwards until you hear a CLICK in the first position (fig.1). Repeat the same operation with the other leg support.
Insert the lower traverse G into the appropriate housing inside the leg supports A (fig.2) until you hear the click of the metal pin engagement.
Hook the upper structure B to the two legs as shown in figure
The CLICK of the pin indicates the correct attachment of the structure.
WARNING: Turn the gray buckles from the same side as the adjustable feet (fig.4).
Mount the upper structure B and textile E to the legs.
Subsequently, attach the upper structure to the legs by inserting the appropriate plastic support as shown in Figure 6. Push down until you hear the CLICK of engagement. Perform the operation on both sides.
Attach textile covering E to central structure C by hooking the 2 clips C2 located at the bottom of the covering (fig.7).
Hook buttons C2 to buttons B5 to proceed with fixing the textile to the upper structure (Fig.8) and complete zip closure E3 (fig.8A). Repeat the same operation for the missing side.
Place mattress F on the bottom of the crib (fig.9).
Lock the 4 wheels A6 of the crib by lowering the levers that raise the crib slightly.

Adjusting the height of the crib:
It is possible to adjust the height of the crib in different positions.

IMPORTANT SAFETY INSTRUCTION

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

WARNING: TO AVOID THE DANGER OF SUFFOCATION REMOVE THIS PLASTIC COVER BEFORE USING THE PRODUCT. THIS COVER SHOULD BE DESTROYED OR KEPT AWAY FROM BABIES AND CHILDREN.
WARNINGS Only for domestic use.
WARNING: Do not use this product without reading the instructions for use first.
WARNING: When in its highest position the product is intended for use by children of 0 to 5/6 months (weighing up to 9 kg).
WARNING: Stop using the product as soon as the child can sit or kneel or pull itself up.
WARNING: Placing additional items in the product may cause suffocation.
WARNING: Do not use the product if any part is broken, torn or missing.
WARNING: DO NOT USE the product in “Crib Configuration” and/or “Bedside sleeper Configuration” if any part is missing, dam-aged or broken. Contact Artsana SpA for spare parts and user instructions if needed. DO NOT REPLACE missing, damaged or bro-ken parts with non-OEM components or components not approved by Artsana SpA.
WARNING: Consult the user manual for the list of components. Examine the prod-uct regularly to make sure that there are no loose, damaged or missing parts.
WARNING: Always use all parts needed for each configuration of use.
WARNING: Be aware of the risk of burns from cigarettes, naked flames and other heat sources, like electric or gas heaters, that are near the crib.
Before assembly, check that the product and all of its components have not been damaged during transportation. Should any part be damaged, keep out of reach of children and do not use.
Make sure that the adult using the product knows exactly how it works.
WARNING: The product is ready for use only when all locking mechanisms are engaged. Make sure they are securely en-gaged before use.
WARNING: When your child is unattended and the product is in “Crib Configuration”, al-ways make sure that the side is raised and locked in the closed position and aligned with the upper perimeter of the crib.
When the product is being used, and above all in “Crib Configuration”, the wheels must always be locked.
All operations for opening, adjusting, fas-tening and installing the product must be carried out by an adult.
Before using in the “Bedside sleeper Configuration” (fastened to bed), make sure the product is fastened and installed correctly. Check the fastening system hold before each use by attempting to push the crib away from the parents’ bed.
The fixing straps are included in the pack-aging. Other fastening systems should not be used.
To prevent danger of choking due to the child’s head being trapped, when the crib is in the “Bedside sleeper Configuration” (fastened to the bed) it should be prop-erly fastened to the parents’ bed with the fixing straps as explained in the instruc-tion booklet.
WARNING: Before placing the child inside the crib when the product is in the “Bed-side sleeper Configuration” (fastened to the bed), be sure that the fixing straps are fas-tened and tightened correctly. The product must be attached to the parents’ bed frame/support and there should be no gaps between the lowest part of the Bed-side sleeper crib and the parents’ mattress.
If there are gaps between the lowest part of the Bedside sleeper crib and the parents’ mattress, DO NOT use the product.
Do not fill any spaces or gaps between the parents’ mattress and the crib with pillows, blankets, bedsheets or any other material that may cause a choking hazard.
DANGER! The Bedside sleeper, when not attached to the adult’s bed, shall have all its sides in place and/or in their highest position.
WARNING: To avoid hazards from the child’s neck being caught on the top rail on the side that is next to the adult bed, the top rail must not be higher than the adult bed mattress.
WARNING: To avoid the risk of your child being strangled the attachment system to the adult’s bed shall always be kept away from and out of the crib.
The product must always be placed on a horizontal surface. Never leave the product on a sloping surface with your child inside.
Unattended children must not be left to play near the product.
Do not use the product without the frame.
Keep the fixing straps out of reach of children.
Only use the mattress provided with the product or replacement mattresses ap-proved by Artsana.
WARNING: Do not use more than one mattress in the product. Only use the mat-tress that comes with the product.
WARNING: Only use the mattress sold with this crib, do not add a second mat-tress on this one, suffocation hazard.
WARNING: When not attached to the bed, the crib can be inclined by a maximum of 4 positions between one leg support and the other.
Infants can suffocate on soft bedding.

Avoid placing pillows or similar items un-der newborn babies for additional comfort during sleep.

Use the crib in the “Bedside sleeper Con-figuration” (fastened to the bed) only with beds of the size indicated in the reference figure at the beginning of the manual.
Do not leave anything inside the product that might reduce its depth.
To prevent the child from being trapped, do not place the crib close to walls or obstacles.
Do not leave any small objects inside the product that might be swallowed.
Only use spare parts approved by the man-ufacturer. Do not attach any accessories to the product that have not been supplied by the manufacturer.
Do not make adjustments to the product when the child is in it.
Do not use the rocking function if the child is unattended in the crib. Leave the crib in the locked position whenever the child is unattended.
When in the “Bedside sleeper Configura-tion” (fastened to the bed), the crib must never be inclined.
Do not move the product when the child is inside.
Do not use the product with more than one child at a time.
WARNING: Do not place the product close to another product, which could present a danger of suffocation or strangu-lation, e.g. strings, blind/curtain cords, etc To avoid strangulation hazards, never give children objects with strings attached, or leave these objects within their reach.
Prolonged exposure to direct sunlight may cause the product’s colour to fade. After prolonged exposure of the product to high temperatures, wait a few minutes prior to putting your child in it.
All assembly couplings must be fastened correctly. Be sure there are no loose screws, as a child’s body or clothing (e.g., laces, necklaces, cords from pacifiers) may get trapped and cause a strangulation hazard.
Keep the product out of reach of children when it is not in use.
WARNING: Be careful when the child is in the crib, that objects or bedding items do not fall into the crib.

COMPONENTS

A. Leg rest with wheels
A1. Height adjustment button
A2. Rocking slide
A3. Height indicator
A4. Foot rotation release button
A5. Articulated feet
A6. Wheels with brakes
A7. Slide deactivation button
A8. Cross slots
B. Upper structure
B1. Fixed structure
B2. Mobile structure
B3. Foot hook
B4. Side tilting handle
B5. Fabric attachment buttons
C. Central support structure
C1. Fastening pin
C2. Fabric lining attachment buttons
C3. Grey fastening buckles
D. Fastening straps
D1. Red fastening buckles
E. Fabric lining
E1. Strap with clip
E2. Pocket
E3. Fabric removal zipper
E4. Net windows
E5. Rigid tabs for fastening the fabric lining to the upper structure
F. Mattress with removable lining
G. Bottom bar
H. Bag

$chicco-NeXt-2-me-Dream-Crib-fig- $12$$

$chicco-NeXt-2-me-Dream-Crib-fig- $13$$

ASSEMBLY OF THE CRIB

Hold foot support “A” and make the outer bar slide up until you hear it CLICK into the first position (fig.1). Repeat this step for the other foot support.
Insert the lower bar “G” in the relevant slots inside the foot supports “A” (fig.2) until you hear the metal pin lock into place.
Fasten the upper structure “B” to the two feet as shown in figure 3. The CLICK of the pin means that the structure is cor-rectly fastened.
WARNING: Make sure the grey buckles are facing the same side as the articulated feet (fig.4).
Mount the upper structure “B” and fit the fabric “E” on the feet “A” making the bar of the foot slide first inside the lateral pocket of the fabric (fig.5). Repeat the step on both sides.
WARNING: The structure must be oriented so that the side with the handle ”B4” is facing the same direction as the articulated feet “A5.”
Then fasten the upper structure to the feet by inserting the relevant plastic support as shown in figure 6. Push down until you hear it click into place. Repeat the step on both sides.
Fasten the fabric lining ”E” to the central structure “C” by fastening the 2 straps with clip “C2” on the lower part of the lining (fig.7).
Fasten the buttons “C2” to the buttons “B5” to fasten the fabric to the upper structure (fig.8) and complete by closing the zippers E3 (fig.8A). Repeat the step for the missing side.
Position il mattress “F” on the bottom of the crib (fig.9).
Block the 4 wheels “A6” of the crib by lowering the levers that activate the brakes (fig.10). The crib is now ready to be used.

$chicco-NeXt-2-me-Dream-Crib-fig- $1$$

$chicco-NeXt-2-me-Dream-Crib-fig- $2$$

WARNING:

WARNING: Make sure that all the fasteners are engaged correctly and that the zippers are closed and locked at the end.
WARNING: Do not use the crib with the articulated feet partially or completely turned or released (fig. 11). The position of correct use is illustrated in figure 12. In the case of accidental knocking against the articulated feet, put them back in the correct position by lifting the crib slightly.
WARNING: If the crib has been used previously in “Bedside sleeper configuration (fastened to the bed),” make sure that the side is in locked position and check that it is engaged correctly. $chicco-NeXt-2-me-Dream-Crib-fig- $3$$

ADJUSTING THE CRIB HEIGHT

The crib can be adjusted at different heights. To adjust the height, the setting button “A1” up and lift the crib to the desired position (fig.13). Repeat the step on the opposite side.

The base of the crib can be slightly inclined by adjusting the 2 feet at different heights (fig.14).
WARNING: The crib can be inclined by a maximum of 4 positions between one foot and the other (e.g., right foot in position 5 and left foot in position 1, see fig. 15).
WARNING: The child’s head must always be positioned near the raised end (fig.16).
WARNING: It is not possible to select different heights on the two sides of the crib when in rocking configuration. $chicco-NeXt-2-me-Dream-Crib-fig- $4$$

BEDSIDE SLEEPER CONFIGURATION

BEDSIDE SLEEPER CONFIGURATION (FASTENED TO THE BED)
It is possible to fasten the crib to the parents’ bed (Bedside sleeper configuration).

CAUTION – IMPORTANT FOR YOUR CHILD’S SAFETY:
This configuration is allowed only with beds that allow complying with all the conditions described in this paragraph.
In particular, the side of the crib must always be positioned against the mattress of the parents’ bed and the parents’ mattress must be aligned with (or at most higher than) the height of the crib’s side (fig.17). Moreover, the crib must be fastened to the frame of the parents’ bed or to the mattress support (mesh or slat sprung base).

WARNING: Check that the structure of the crib in Bedside sleeper configuration does not interfere with the parents’ bed.
WARNING: Be careful when the child is into the bedside sleeper, that objects or bedding items do not fall into the crib.

Lower the side of the crib “B2” by gripping the relevant interface “B4” and rotating it upward to release the side lowering mechanism (fig.18).
WARNING: Use the crib with the bar lowered only in Bedside sleeper configuration.
Put the crib against the parents’ bed and check the height of the crib compared to the parents’ mattress.
WARNING: The height of the parents’ mattress must be higher than or the same as that of the side of the crib. If this is not the case, use the adjustment system to achieve this condition on both sides.
WARNING: In Bedside sleeper configuration, the 2 feet of the crib must be set at the same height.
To fasten the crib to the parents’ bed (Bedside sleeper configuration), use the pair of supplied straps “D”. The straps are found in the lower pocket “E2” of the fabric lining (fig.19).
Fasten the grey buckles “C3” under the fabric lining on both sides. Make sure the red buckle “D1” is positioned above the strap as illustrated in figure 20.
Then run the strap around the structure of the parents’ bed from the bottom up (fig.21) and fasten the red buckle forming a noose (fig.22). Repeat this operation on the other side. To make installation easy, when fastening the buckles, always keep the crib slightly away from the parents’ bed.
At this point put the crib against the parents’ bed and tighten the noose pulling the straps (fig.23). Carry out this step first on one side and then on the other, adjusting the straps until the crib is in contact with the parents’ mattress.
WARNING: Before use, always make sure that there is no space between the parents’ mattress and crib’s side. Otherwise adjust the straps pulling them until the required condition is restored. Make sure that the side is always free to be lowered and raised completely.
Fit the length of the straps in excess inside the pocket on the bottom of the fabric lining.
Lock the crib’s wheels.
If when fastening the crib to the parents’ bed it is not possible to fit the crib’s feet under the parents’ bed, the bed can be fastened anyway by the following the instructions above and rotating the articulated feet when putting the crib against the bed.
To turn the feet, pull the rotation release button “A4” and turn the feet “A5” of the crib inward by hand (fig.24).
To close the side that can be lowered, just pull up by holding it by the upper mobile structure “B2” (fig.25). Always make sure that it is engaged correctly. $chicco-NeXt-2-me-Dream-Crib-fig- $5$$ $chicco-NeXt-2-me-Dream-Crib-fig- $6$$

WARNING:

WARNING: Whenever the side is lowered, make sure that the position compared to the parents’ mattress has not changed from that illustrated in the paragraphs above.
WARNING: Never use the rocking function when the crib is in “Bedside sleeper configuration (fastened to the bed).”
WARNING: Use the product with beds and/or mattresses with straight sides only. Do not use the product with round beds and/or mattresses or water mattresses.
WARNING: When the product is used in “Bedside sleeper configuration (fastened to the bed),” it must always be mounted on the long side of the bed. DO NOT install the product at the head or feet of the bed.

CARE AND MAINTENANCE

The crib and mattress have a resistant fabric lining that can be removed completely and washed. To remove the fabric, follow the instructions in the paragraph “HOW TO REMOVE THE FABRIC COVER.”

WARNING:
Covering or removing the fabric may take a few minutes and must be carried out by an adult. Regularly inspect the toy for signs of wear and any damage. In the case of damage do not use and keep out of reach of children. When washing the fabrics pay close attention to the instructions on the label. Do not use solvents, abrasive or overly aggressive products.

Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

Check that the fabric and the stitching are in good condition after each wash.

WARNING:
When covering or removing the cover, take care when handling the fabric parts so as to avoid accidental tears or damage.

DOING THE BED
It is possible to unfasten the crib from the parents’ bed when doing the bed. Just unfasten the grey buckles under the fabric lining. When fastening the crib again to the parents’ bed, pull the straps again to make sure that the crib is correctly and securely fastened to the parents’ bed. Make sure that all the steps illustrated above in “Bedside sleeper configuration (fastened to the bed)” have been completed.

HOW TO REMOVE THE FABRIC COVER

Remove the mattress and unfasten the buttons in the lower part of the fabric following the procedure illustrated in “ASSEMBLY OF THE CRIB” in the opposite order.
Open the 3 zippers “E3” on the upper structure “B” and unfasten the 4 buttons fastening the fabric to the upper structure.
Press the buttons on the fasteners of the feet, turn the upper bar structure up and pull the upper structure out of the feet (fig.26A-B)
Then remove the fabric lining. $chicco-NeXt-2-me-Dream-Crib-fig- $7$$

DISASSEMBLING THE CRIB:
The crib can be disassembled completely to put it away in the supplied bag. In order to complete the disassembly of the crib after removing the fabric, remove the lower bar and the central support structure by repeating the steps illustrated in “ASSEMBLY OF THE CRIB.”

ROCKING CONFIGURATION

To use rocking configuration:

Pull out the slides “A2” on the lower part of the feet of the crib positioning the foot near the centre of the top of each slide and, holding the upper edge of the crib with your hand, pull the crib up while holding the crib down with your foot (fig.27).
Repeat the same operation for both sides.
To deactivate rocking configuration, just press the button “A7” at the centre of the slide on each side and then accompany the crib down holding by the upper edge so that the slide returns to closed position (fig.28). Always make sure that the slide has returned to closed position. $chicco-NeXt-2-me-Dream-Crib-fig- $8$$ $chicco-NeXt-2-me-Dream-Crib-fig- $9$$ $chicco-NeXt-2-me-Dream-Crib-fig- $10$$ $chicco-NeXt-2-me-Dream-Crib-fig- $11$$

WARNING:

WARNING: Always remember to deactivate rocking configuration when using the product in “Bedside sleeper(fastened to the bed)” or when the child is unattended.
WARNING: It is not possible to select different heights on the two sides of the crib when in rocking configuration.

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as provided for by the instructions for use. The warranty shall not therefore apply in the case of damages caused by improper use, wear or accidental events. For the duration of warranty on conformity defects please refer to the specific provisions of national laws applicable in the country of purchase, where provided.

ARTSANA UK Ltd.
2nd Floor 1 Imperial Place Maxwell Road Borehamwood Hertfordshire – WD6 1JN
0208 953 6627 (office hours)
www.CHICCO.co.uk.

ARTSANA SPAIN S.A.U.
C/Industria 10
Pol. Industrial Urtinsa Apartado De Correos 212 – E 28923 Alcorcon (Madrid)-Spain
902 117 093
www.CHICCO.es.

ARTSANA S.p.A.
Via Saldarini Catelli, 1 22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111
Fax (+39) 031 382 400
www.CHICCO.com.

ARTSANA S.p.A. – Via Saldarini Catelli, 1 – 22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111 – Fax (+39) 031 382 400 – www.chicco.com.