DERICO BT33 Blast Bluetooth Conference Speaker with Microphone User Manual
- June 11, 2024
- DERICO
Table of Contents
DERICO BT33 Blast Bluetooth Conference Speaker with Microphone
Product Overview
Thank you for purchasing the Derico Blast Conference Speaker. We are sure you will enjoy its range of features and find it easy to use.3
About Your Device
- Speaker
- Microphone
- Bluetooth
- Volume Down
- Mute/ Unmute
- volume UP
- Power on / Power Off
- USB -C Input (For Audio and Charger)
- Charger indicator
- USB -C output (As Power station for Phone Charger )
- USB -C Cover
Functions
-
Bluetooth Indicator
The blue indicator blinks when the Bluetooth is waiting for a connection and is steady when the Bluetooth connection is successful. If the Bluetooth is not connected within one minute, the device enters hibernation, and the Bluetooth indicator turns off. Press Bluetooth once to wake up the light. -
Volume Up Indicator
When you lower the volume, the white indicator is on once you press the button. When the volume is set to the minimum, the white light blinks three times. -
Unmute/Mute Indicator
Press the button to mute, and the red light is steady. Press again to unmute, and the red light is off. When the device is connected via USB cable, the white indicator is constantly on. The mute button is only applicable to Bluetooth connections and cannot be enabled for USB cable connections. -
Volume Down Indicator
To increase the volume, press the “Increase Volume” button once, and the white light will blink once. When the volume reaches the maximum, the white light will be on. -
Power-on/off Indicator
Long press this button to start up, and all the indicators will flash when starting up. Long press this button to shut down, and all the indicators will go out.
When the mobile phone is connected to the device through Bluetooth, you can press this button to answer the call, and long press this button to reject the call. During a call, the indicator is steady on and the call-end hand is off.
When the device power is low, the indicator light will flash red, prompting to charge in time.
Packing list
How to Use
How to Connect
Bluetooth wireless connection
When the device is powered on for the first time, the Bluetooth indicator
continuously blinks and waits for a connection. When connected to the
Bluetooth device, the blue light turns to steady. Short-press Bluetooth to
disconnect the currently connected device.
Bluetooth Name: BT-SpeakerPhone
USB wired connection
When the device is in the off state, it will automatically turn on after
connecting with the computer with the USB cable. Mute indicator White If the
indicator is steady on, the connection is successful.
Note:
- When the device has both a USB cable and Bluetooth wireless connection, the Bluetooth connection is preferred. Short press the Bluetooth button 3S to switch to USB connection.
- Make sure to use USB -C Input Port.
Built-in power Sation to charge the mobile phone.
You can charge the phone by connecting it to the device’s USB-C output port .
Warm Prompt
- After the Bluetooth wireless connection or USB connection is successful, use the network calling application (such as Skype, teams, zoom, etc.) on the mobile phone or computer to conduct remote network meetings according to the operation method of the application.
- Volume adjustment: You can use the volume control button to adjust the volume, and you can also control the volume on a computer or mobile phone.
- Microphone mute: During a call, press the mute button to mute. The mute indicator will turn red. Press the mute button again to unmute, and the red light will turn off. The mute button is only applicable to Bluetooth connections and cannot be enabled for USB cable connections.
- End a call: Use the call software to end a call.
Specification
Input
|
5V lA
---|---
Output
|
5V lA
Operating Range
|
10m
Talk Time
|
9H
Battery
|
2000mA
FCC Compliance
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: 2ARKF-BT33
WARRANTY
Please do not attempt to repair this equipment, may have a risk of electric
shock, for maintenance, please contact: https://serviceku.com/derico
Email: hello@bitomic.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>