Digihome 55BI23UHDS Colour Television with Remote Control User Manual

55BI23UHDS Colour Television with Remote Control

Product Information

The product is an electronic device that requires a 220-240 V AC
50 Hz outlet to operate. It is designed to be operated only by
qualified service personnel. The device has a mains plug that is
used to disconnect it from the mains. The device should be
disconnected from the mains during extreme weather conditions and
long periods of inactivity. The device contains hazardous live
terminals that should not be touched under normal operating
conditions. The product comes with a stand that should be carefully
attached to the TV. The stand comes with screws that should be
tightened firmly to prevent the TV from tilting. The TV set should
not be disposed of in fire or with hazardous or flammable
materials. The TV set contains a Class 1 laser source that is safe
under reasonably foreseeable conditions of operation.

Product Usage Instructions

• Read the instructions fully before installing or operating the
  device.

• Disconnect the TV set from the mains during extreme weather
  conditions and long periods of inactivity.

• Keep plastic bags out of the reach of babies, children, and
  domestic animals to avoid danger of suffocation.

• Carefully attach the stand to the TV. If the stand comes with
  screws, tighten them firmly to prevent the TV from tilting, but do
  not over-tighten the screws.

• Do not dispose of batteries in fire or with hazardous or
  flammable materials. Batteries must not be exposed to excessive
  heat such as sunshine, fire, or the like.

• Avoid excessive sound pressure from earphones or headphones as
  it can cause hearing loss.

• Never let anyone, especially children, push or hit the screen,
  push anything into holes, slots, or any other openings in the
  TV.

• The device should be operated only by qualified service
  personnel.

• Refer to the on-screen instructions for operating the related
  features.

Contents Safety Information …………………………………………… 2 Mains Supply ………………………………………………….. 2 Markings on the Product…………………………………… 2 Environmental Information………………………………… 3 Features ………………………………………………………… 4 Ultra HD (UHD)……………………………………………….. 4 High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)…………………………………………………………….. 4 Dolby Vision……………………………………………………. 4 Accessories Included……………………………………….. 4 Standby Notifications……………………………………….. 4 TV Control Button & Operation………………………….. 5 Using Main TV Menu ……………………………………….. 5 Inserting the Batteries into the Remote ………………. 7 Power Connection …………………………………………… 7 Antenna Connection ………………………………………… 7 Licence Notification …………………………………………. 7 Disposal Information………………………………………… 8 Specification …………………………………………………… 9 Remote Control …………………………………………….. 10 Connections………………………………………………….. 11 Switching On/Off……………………………………………. 12 First Time Installation……………………………………… 12 Media Playback via USB Input ………………………… 13 Media Browser………………………………………………. 13 FollowMe TV…………………………………………………. 13 CEC …………………………………………………………….. 14 Game Mode………………………………………………….. 14 E-Manual ……………………………………………………… 14 Settings Menu Content …………………………………… 15 General TV Operation ……………………………………. 22 Using the Channel List …………………………………… 22 Configuring Parental Settings………………………….. 22 Electronic Programme Guide ………………………….. 22 Teletext Services (where available) ………………….. 23 MHEG Teletext ……………………………………………… 23 BBC Red Button+ (RB+)…………………………………. 23 Software Upgrade………………………………………….. 23 Troubleshooting & Tips…………………………………… 24 HDMI Signal Compatibility………………………………. 24 Supported File Formats for USB Mode …………….. 25 Video File Formats ………………………………………… 25 Picture File Formats ………………………………………. 25 Audio File Formats ………………………………………… 25 Subtitle File Formats………………………………………. 26

Supported DVI Resolutions …………………………….. 27 Connectivity ………………………………………………….. 28 Wired Connectivity…………………………………………. 28 Wireless Connectivity …………………………………….. 28 Networked Standby Mode ………………………………. 30 Wireless Display ……………………………………………. 30 Connectivity Troubleshooting ………………………….. 30 Using Audio Video Sharing Network Service……… 31 Apps ……………………………………………………………. 31 Freeview Play Platform…………………………………… 31 Internet Browser ……………………………………………. 31 HBBTV System……………………………………………… 32 Smart Center ………………………………………………… 33 Alexa Ready …………………………………………………. 34 DVB functionality information ………………………….. 35

English – 1 –

Safety Information
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains.
The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby mode or switched off.
Note: Follow the on screen instructions for operating the related features.
IMPORTANT – Please read these instructions fully before installing or operating
WARNING: This device is intended to be used by persons (including children) who are capable / experienced of operating such a device unsupervised, unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety. Use this TV set at an altitude of less than 5000 metres above the sea level, in dry locations and in regions with moderate or tropical climates. The TV set is intended for household and similar indoor use but may also be used in public places.
For ventilation purposes, leave at least 5cm of free space around the TV. The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. The power cord/plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel. Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g. on shelves above the TV). Do not expose the TV to direct sunlight or do not place open flames such as lit candles on the top of or near the TV. Do not place any heat sources such as electric heaters, radiators, etc. near the TV set. Do not place the TV on the floor or inclined surfaces.

To avoid danger of suffocation, keep plastic bags out of the reach of babies, children and domestic animals. Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly. Do not dispose of the batteries in fire or with hazardous or flammable materials. WARNING
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the TV.

Caution

Serious injury or death risk

Risk of electric shock Dangerous voltage risk

Maintenance

Important maintenance component

Mains Supply

The set should be operated only from a 220-240 V

AC 50 Hz outlet. Make sure the TV or its stand are not placed on the power cord. DO NOT cut off the

mains plug from this equipment, this incorporates a

special Radio Interference Filter, the removal of which will impair its performance. In the UK, the fuse fitted

in this plug is approved by ASTA or BSI to BS1362.

It should only be replaced by a correctly rated and approved type. IF IN DOUBT PLEASE CONSULT A

COMPETENT ELECTRICIAN.

Markings on the Product

The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered

where the product bears related marking only. Note such information for security reasons.

Class II Equipment: This appliance is designed in such a way that it does not require
a safety connection to electrical earth.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal

operating conditions.

Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.

Class 1 Laser Product: This product contains Class 1 laser
source that is safe under

reasonably foreseeable

conditions of operation.

English – 2 –

WARNING
Do not ingest the battery, Chemical Burn Hazard.
This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­
A television may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
ALWAYS use furniture that can safely support the television set.
ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
NEVER place a television set in an unstable location.
NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
The equipment is only suitable for mounting at heights 2 m.
If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­
Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing ­ and to a television distribution system using coaxial cable, may in some circumstances create a fire

hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator).
WALL MOUNTING WARNINGS
Read the instructions before mounting your TV on the wall.
The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.
Do not install the TV on a ceiling or on an inclined wall.
Use the specified wall mounting screws and other accessories.
Tighten the wall mounting screws firmly to prevent the TV from falling. Do not over-tighten the screws.
Figures and illustrations in this instruction book are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice.
Environmental Information
This television is designed to be environmentally friendly. To reduce energy consumption, you can follow these steps:
If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will adjust the energy consumption accordingly. Set as Off to turn this setting off. If you like to set the backlight to a fixed value set as Custom, highlight the Backlight (will be located under the Energy Saving setting) and then adjust manually using Left or Right directional buttons on the remote.
Note: Available Energy Saving options may differ depending on the selected Mode in the Settings>Picture menu.
The Energy Saving settings can be found in the Settings>Picture menu. Note that some picture settings will be unavailable to be changed.
You can also turn the screen off us ng the Screen Off opt on, f you want to hear the sound only and don t need to watch. If pressed Right button or Left button consecutively Screen Off option will be selected and “Screen w ll be off n 1 seconds.” message w ll be d splayed on the screen. Select Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off in 15 seconds. Press any button on the remote or on the TV to turn the screen on again.
Note: Screen Off option is not available if the Mode is set to Game.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce or stop the energy consumption.

English – 3 –

Features

Dolby Vision

Remote controlled colour TV Fully integrated digital terrestrial TV (DVB-T-T2) HDMI inputs to connect other devices with HDMI sockets USB input OSD menu system Stereo sound system Teletext Headphone connection Automatic programming system Manual tuning Automatic power down after up to eight hours. Sleep timer Child lock Automatic sound mute when no transmission. NTSC playback AVL (Automatic Volume Limiting) PLL (Frequency Search) Game Mode (Optional)

Dolby VisionTM delivers a dramatic visual experience, astonishing brightness, exceptional contrast, and vivid colour, that brings entertainment to life. It achieves this stunning image quality by combining HDR and wide colour gamut imaging technologies. By increasing the brightness of the original signal and using a higher dynamic colour and contrast range, Dolby Vision presents amazing true-to-life images with stunning detail that other post-processing technologies in the TV aren’t able to produce. Dolby Vision is supported via native and market applications, HDMI and USB inputs. Set the related HDMI source input as Enhanced from the Sources option in the Settings>System menu or from the Sources>Source Settings menu in order to watch Dolby Vision content, if the Dolby Vision content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case. In the Settings>Picture>Mode menu two predefined picture modes will be available if Dolby Vision content is detected: Dolby Vision Bright and Dolby Vision Dark. Both allow the user to experience the content in the way the creator originally intended with different ambient lighting conditions.

Picture off function

Accessories Included

Ethernet (LAN) for Internet connectivity and service Remote Control

802.11 a/b/g/n built in WLAN Support

Batteries: 2 x AAA

Audio Video Sharing

Instruction Book

HbbTV

Quick Start Guide

Ultra HD (UHD)

Power Cord

TV supports Ultra HD (Ultra High Definition – also known as 4K) which provides resolution of 3840 x 2160 (4K:2K). It equals 4 times the resolution of Full HD TV by doubling the pixel count of the Full HD TV both horizontally and vertically. Ultra HD content is supported via native and market applications, HDMI, USB input(s) and over DVB-T2 broadcasts.
High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)

Standby Notifications
If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 3 minutes, it will go into standby. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because there was no signal for a long time.” You can disable this functionality by setting the No Signal Timer option in the Settings> System>Device Settings menu accordingly.

Using this feature the TV can reproduce greater dynamic range of luminosity by capturing and then combining several different exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic colour and other improvements. It delivers the look that filmmakers intended to achieve, showing the hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG content is supported via native and market applications, HDMI and USB inputs. Set the related HDMI source input as Enhanced from the Sources option in the Settings>System menu or from the Sources>Source Settings menu in order to watch HDR/HLG content, if the HDR/HLG content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case.

The Auto Power Down option (in the Settings>System >More menu) could have been set to a value between 1 and 8 hours by default. If this setting is not set as Off
and the TV has been left on and not been operated
during the set time, it will switch into standby mode
after the set time has expired. When you next switch-on
the TV, the following message will be displayed: “TV switched to stand-by mode automatically because no operation was made for a long time.” Before the TV switches into standby mode a dialogue window will
be displayed. If you do not press any button the TV
will switch into the standby mode after a waiting period
of about 5 minutes. You can highlight Yes and press OK to switch the TV into standby mode immediately. If you highlight No and press OK, the TV will remain

English – 4 –

on. You can also choose to cancel the Auto Power Down function from this dialogue. Highlight Disable and press OK, the TV will remain on and the function will be set as Off. You can enable this function again by changing the setting of the Auto Power Down option from the Settings>System>More menu. TV Control Button & Operation
Note: The position of the control button may differ depending on the model. Your TV has a single control button. This button allows you to control the Standby-On / Source / Programme and Volume functions of the TV. Operating with the Control Button
Press the control button to display the function options menu. Then press the button consecutively to move the focus to the desired option if needed. Press and hold the button for about 2 seconds to activate the selected option. The icon colour of the option changes when activated. Press the button once again to use the function or enter the sub menu. To select another function option, you will need to deactivate the last activated option first. Press and hold the button to deactivate it. The icon colour of the option changes when deactivated. To close the function options menu do not press the button for a period of about 5 seconds. The function options menu will disappear. To turn the TV off: Press the control button to display the function options menu, the focus will be on the Standby option. Press and hold the button for about 2 seconds to activate this option. The icon colour of the option changes when activated. Then press the button once again to turn the TV off. To turn on the TV: Press the control button, the TV will turn on. To change volume: Press the control button to display the function options menu and then press the button consecutively to move the focus to Volume + or Volume – option. Press and hold the button for about 2 seconds to activate the selected option. The icon colour of the option changes when activated. Then press the button to increase or decrease the volume.

To change channel: Press the control button to display the function options menu and then press the button consecutively to move the focus to Programme + or Programme – option. Press and hold the button for about 2 seconds to activate the selected option. The icon colour of the option changes when activated. Then press the button to switch to the next or previous channel in the channel list.
To change source: Press the control button to display the function options menu and then press the button consecutively to move the focus to Source option. Press and hold the button for about 2 seconds to activate this option. The icon colour of the option changes when activated. Then press the button once again to display the sources list. Scroll through the available sources by pressing the button. TV will automatically switch to the highlighted source.
Note: Main menu OSD cannot be displayed via the control button.
Operation with the Remote Control
Press the Home button on your remote control to display main menu. Use the directional buttons and OK button to navigate and set. Press Back/Return, Exit or Home button to quit a menu screen.
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume by using the Programme +/- and Volume +/- buttons on the remote.
Forced Standby
If your TV stops responding to commands, you can perform forced standby which will terminate the process. In order to do this, press and hold the Standby button on remote control for about 5 seconds.
Using Main TV Menu
When the Home button is pressed, the main TV menu will appear on the screen. You can navigate through the menu items using the directional buttons on the remote. To select an item or see the sub-menu options of the highlighted menu press OK button. When you highlight a menu option some of the sub-menu items of this menu may appear on the upper side of the menu bar for quick access. To use a quick access item highlight it, press OK and set as desired using the Left/ Right directional buttons. When finished press OK or Back/Return button to exit.
You can also see information on location, weather, time and date on the main TV menu screen. The green small icons indicate the current status for time, network and sync for apps. If these icons appears in green, it means

English – 5 –

that the time information is successfully updated. Network is connected and sync is successfully completed. Otherwise the icons will appear in white.
Press Exit button to close the main menu.
1. Home
When main menu is opened Home menu bar will be highlighted. The content of the Home menu can be customised by adding options from other menus. Just highlight an option and press the Down directional button on the remote. If you see Add to Home option you can add it to the Home menu. To delete or change the position of any item in the Home menu, Select Edit Home from the TV menu. The Edit menu will be displayed. Select an item, press OK and select Delete or Move option and press OK. In order to move a menu item use the Right and Left directional buttons to select the position that you want the item to move to and press OK.
2. Search
You can search for Channels, Guide, TV menus, Applications, Web, YouTube and Videos using this option. Press OK and enter a key word using the virtual keyboard. Then highlight OK and press OK to start the search. Results will be displayed on the screen. Highlight the desired result using the directional buttons and press OK to open.
3. TV
3.1. Freeview Play
Connects to the Freeview Play platform where you can access available catch-up TV services (only appears when the TV is connected to the internet).
3.2. Guide
You can access the electronic programme guide menu using this option. Refer to Electronic Programme Guide section for more information.
3.3. Channels
You can access the Channels menu using this option. Refer to Using the Channel List section for more information.
3.4. Timers
You can set timers for future events using the options of this menu. You can also review the previously created timers under this menu.
To add a new timer select the Add Timer tab using the Left/Right buttons and press OK. Set the sub-menu options as desired and when finished press OK. A new timer will be created.
To edit a previously created timer, highlight that timer, select the Edit Selected Timer tab and press OK. Change the sub-menu options as desired and press OK to save your settings.
To cancel an already set timer, highlight that timer, select Delete Selected Timer tab and press OK. A

confirmation message will be displayed. Highlight Yes and press OK to proceed. The timer will be cancelled.
It is not possible to set timers for two or more events that will broadcasted at the same time interval. In this case you will be informed and the timer will be cancelled.
3. . Edit Home
You can customise the content of the Home menu using this option. Highlight and press OK. The Home menu will switch to edit mode. Refer to the Home section for details.
3.6. More Apps
In order to manage the apps installed on your TV, you can use this option. Highlight and press OK. You can add an installed app to Home menu, launch or remove it. Highlight an app and press OK to see the available options.
3.7. Market
You can add new apps from the application market using this option. Highlight and press OK. Available apps will be displayed. You can also access the application market from within the More Apps menu.
3.8. Reset Apps
You can reset your customisations on the Home menu to defaults using this option (availability depends on TV model and its features). Highlight and press OK. A confirmation message will be displayed. Highlight Yes and press OK to proceed. Note that you will not be able to perform this operation again within the next few minutes.
3.9. Accessibility
You can access the accessibility settings menu directly using this option.
3.10. Privacy Settings
You can access the privacy settings menu directly using this option. This option may not be available depending on the model of your TV and the selected country during the first time installation process.
4. Settings
You can manage the settings of your TV using the options of this menu. Refer to Settings Menu Content section for more information.
. Sources
You can manage your input source preferences using the options of this menu. To change the current source highlight one of the options and press OK.
.1. Source Settings
You can access the source settings menu directly using this option. Edit the names, enable or disable selected source options. There are also Regular and Enhanced options available for HDMI sources. Regular and Enhanced options are affecting the colour settings of the selected HDMI source.

English – 6 –

Inserting the Batteries into the Remote
Remove the screw that secures the battery compartment cover on the back side of the remote control first. Insert two size AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back on. Then secure the cover again with the screw.
A message will be displayed on the screen when the batteries are low and must be replaced. Note that when the batteries are low, the performance of the remote control may be impaired.
Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
Power Connection
IMPORTANT: The TV set is designed to operate on a 220-240V AC, 0 Hz supply. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

Licence Notification The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under licence from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2022 Dolby Laboratories. All rights reserved.
YouTube and the YouTube logo are trademarks of Google Inc. For DTS patents, see http://patents.dts.com. Manufactured under licence from DTS Licensing Limited. DTS, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2022 DTS, Inc. ALL RIGHTS RESERVED.

Plug one end (the two-hole plug) of the supplied detachable power cord into the power cord inlet on the rear side of the TV as shown above. Then plug the other end of the power cord into the mains socket outlet. Note: The position of the power cord inlet may differ depending on the model.
Antenna Connection Connect the aerial TV plug to the aerial input (ANT) socket located on the left side of the TV. Left side of the TV
$17
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them.

DVB is a registered trademark of the DVB Project.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television.
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate licence(s) from Microsoft.
Content owners use Microsoft PlayReadyTM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
The “CI Plus” Logo is a trademark of CI Plus LLP.

English – 7 –

This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a licence from Microsoft or an authorised Microsoft subsidiary.
Disposal Information
[European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation and the Directive 2012/19/EU and 2013/56/EU.
By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these products, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Business users] If you wish to dispose of this product, please contact your supplier and check the terms and conditions of the purchase contract.
[Other Countries outside the European Union] These symbols are only valid in the European Union.
Contact your local authority to learn about disposal and recycling.
The product and packaging should be taken to your local collection point for recycling.
Some collection points accept products free of charge.
Note: The sign Pb below the symbol for batteries indicates that this battery contains lead.

1. Products 2. Battery

English – 8 –

Specification

Digital Reception

Fully ntegrated d g tal terrestr al TV(DVB-T) (DVB-T2 compl ant)

Number of Preset Channels Channel Indicator RF Aerial Input Operating Voltage
Audio
Audio Output Power (WRMS.) (10% THD) Power Consumption (W) Networked Standby Mode Power Consumption (W) TV Dimensions DxLxH (with stand) (mm) TV Dimensions DxLxH (without stand) (mm) D splay Operation temperature and operation humidity

1000
On Screen Display 75 Ohm (unbalanced) 220-240V AC, 50Hz. DTS-HD DTS Virtual:X Dolby Atmos
2 x 10
140W
< 2
250 x 1243 x 768
53/85 x 1243 x 719
55″ 0ºC up to 40ºC, 85% humidity max

Wireless LAN Transmitter Specifications

Frequency Ranges 2400 – 2483.5 MHz (CH1 – CH13) 5150 – 5250 MHz (CH36 – CH48)

Max Output Power < 100 mW < 200 mW

5250 – 5350 MHz (CH52 – CH64) < 200 mW

5470 – 5725 MHz (CH100 CH140)

< 200 mW

Country Restrictions
The Wireless LAN equipment is intended for home and office use in the UK and Northern Ireland (and other countries following the relevant EU and/or UK directive). The 5.15 – 5.35 GHz band is restricted to indoor operations only in the EU countries, in the UK and Northern Ireland.

Country

Restriction

Bulgaria

General authorisation required for outdoor use and public service

If used outside of its own premises, general

Italy

authorisation is required. Public use is subject to general authorisation by the

respective service provider

Greece

In-door use only for 5470 MHz to 5725 MHz band

Luxembourg

General authorisation required for network and service supply (not for spectrum)

Norway

Radio transmission is prohibited for the geographical area within a radius of 20 km from the centre of Ny-Ålesund

Russian Federation

In-door use only

Israel

5 GHz band only for 5180 MHz-5320 MHz range

The requirements for any country may change at any time. It’s recommended that user checks with local authorities for the current status of their national regulations for 5 GHz wireless LAN’s.

Remote Control

English – 9 –

1. Standby: Switches On / Off the TV
2. Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen.
3. Language: Displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available)
4. Mute: Completely turns off the volume of the TV
. Volume +/-
6. Guide: Displays the electronic programme guide
7. Directional buttons: Helps navigate menus, content, etc. and displays the subpages in TXT mode when pressed Right or Left
8. OK: Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode)
9. Back/Return: Returns to previous screen, previous menu, opens index page (in TXT mode). Quickly cycles between previous and current channels or sources
10. Netflix: Launches the Netflix application
11. Prime Video: Launches the Amazon Prime Video application
12. Twitch: Launches the Twitch application
13. Coloured Buttons: Follow the on-screen instructions for coloured button functions
14. Rewind: Moves frames backwards in media such as movies
1 . No function
16. Play: Starts to play selected media
17. Stop: Stops the media being played
18. Pause: Pauses the media being played
19. Fast Forward: Moves frames forward in media such as movies
20. Freeview Play: Connects to the Freeview Play platform where you can access available catch-up TV services
21. Rakuten TV: Launches the Rakuten TV application
22. YouTube: Launches the YouTube application
23. Exit: Closes and exits from displayed menus or returns to previous screen
24. Info: Displays information about on-screen content, shows hidden information (reveal – in TXT mode)
2 . Home: Displays TV menu
26. Source: Shows available broadcast and content sources
27. Programme +/-
28. Text: Displays teletext (where available), press again to superimpose the teletext over a normal broadcast picture (mix)
English – 10 –

Connections

Connector

Type

HDMI Connection (side&back)

SPDIF

SPDIF (Optical Out) Connection
(back)

HEADPHONE

Headphone Connection
(back)

LAN

USB Connection
(side)
CI Connection
(side)
Ethernet Connection
(back)

Cables LAN / Ethernet Cable

Device
CAM module

When using the wall mounting kit (available from a third party in the market, if not supplied), we recommend that you plug all your cables into the back of the TV before mounting on the wall. Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. The/Each USB input of your TV supports devices up to 500mA. Connecting devices that have current value above 500mA may damage your TV. When connecting equipment using a HDMI cable to your TV, to guarantee sufficient immunity against parasitic frequency radiation and troublefree transmission of high definition signals, such as 4K content, you have to use a high speed shielded (high grade) HDMI cable with ferrites.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them.

English – 11 –

Switching On/Off
To Switch the TV On
Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
Press the Standby button, Programme +/- or a numeric button, Guide button, Netflix button or Freeview Play button on the remote control.
Press the control button on the TV.
To Switch the TV Off
Press the Standby button on the remote control.
Press the control button on the TV, the function options menu will be displayed. The focus will be on the Standby option. Press and hold the button for about 2 seconds to activate this option. The icon colour of the option will change. The icon colour of the option changes when activated. Then press the button once again to turn the TV off.
To power down the TV completely, unplug the power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby LED can blink to indicate that features such as Standby Mode Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK. In the following steps of the installation guide, set your preferences using the directional buttons and OK button.
After the language selection, you will be asked whether you want to change accessibility settings. Highlight Yes and press OK to change. Refer to System Menu Content section for detailed information on available options.
Set your country preference on the next screen. Depending on the country selection you may be asked to set and confirm a PIN at this point. The selected PIN cannot be 0000. You have to enter it if you are asked to enter a PIN for any menu operation later.
You can activate Store Mode option in the next step. This option will configure your TV’s settings for store environment and depending on the TV model being used, the supported features of it may be displayed on the screen as an info banner. This option is intended only for store use. It is recommended to select Home Mode for home use. Store mode option will be available in Settings>System>More menu and can be turned off/on later. Make your selection and press OK to continue.
Depending on the model of your TV, the picture mode selection screen may appear at this point. In order for your TV to consume less energy and be more

environmentally friendly select Natural and press OK to continue. If you select Dynamic and press OK, a confirmation dialogue will be displayed. Select Yes and press OK to proceed. You can change your selection later using the Mode option in the Settings>Picture menu.
Depending on the model of your TV and the country selection Privacy Settings screen may appear at this point as well activating Parental Control. Using the options on this screen you can set your privacy privileges. Highlight a feature and use Left and Right directional buttons or OK button to enable or disable. Read the related explanations displayed on the screen for each highlighted feature before making any changes. You can use Programme +/- buttons to scroll up and down to read the entire text. You will be able to change your preferences at any time later from the Settings>System>Privacy menu. If the Internet Connection option is disabled Network/Internet Settings screen will be skipped and not displayed. If you have any questions, complaints or comments regarding this privacy policy or its enforcement, please contact by email at [email protected].
Highlight Next and press OK button on the remote control to continue and the Network/Internet Settings screen will be displayed. Please refer to Connectivity section if you need information on configuring a wired or a wireless connection (availability depends on the model) and other available options. If you want your TV to consume less power in standby mode, you can disable the Networked Standby Mode option by setting it as Off. After the settings are completed highlight Next and press OK button to continue.
On the next screen you need to agree to the terms and conditions of Freeview Play to make use of the related services. Scroll the page to read the entire text using the up/down directional buttons or Programme +/- buttons. Highlight Yes and press OK on the remote to confirm and proceed. Highlight No and press OK to proceed without confirmation. For further requirements for Freeview Play services refer to the Freeview Play Platform section.
On next screen you can set broadcast types to be searched, set your encrypted channel searching and time zone (depending on the country selection) preferences. Additionally you can set a broadcast type as your favourite one. Priority will be given to the selected broadcast type during the search process and the channels of it will be listed on the top of the channel list. When finished, highlight Next and press OK to continue.
About Selecting Broadcast Type
To turn a search option on for a broadcast type highlight it and press OK, Left or Right directional button. The checkbox next to the selected option will be checked. To turn the search option off clear the checkbox by

English – 12 –

pressing OK, Left or Right directional button after moving the focus on the desired broadcast type option.
Digital Aerial: If D. Aerial broadcast search option is turned on, the TV will search for digital terrestrial broadcasts after other initial settings are completed.
After the initial settings are completed the TV will start to search for available broadcasts of the selected broadcast types.
While the search continues current scan results will be displayed at the bottom of the screen. You can press the Home, Back or Exit button to cancel the search. The channels that have already been found will be stored in the channel list.
After all the available stations are stored, Channels menu will be displayed. You can edit the channel list according to your preferences using the Edit tab options or press the Home button to quit and watch TV.
While the search continues a dialogue may appear, asking whether you want to sort channels according to the LCN(). Select Yes and press OK to confirm.
() LCN is the Logical Channel Number system that organises available broadcasts in accordance with a recognisable channel number sequence (if available).
Note: Do not turn off the TV while initialising first time installation. Note that, some options may not be available depending on the country selection.
Media Playback via USB Input
You can connect 2.5″ and 3.5″ inch (HDD with external power supply) external hard disk drives or USB memory stick to your TV by using the USB input(s) of the TV.
IMPORTANT! Back up the files on your storage devices before connecting them to the TV. Manufacturer will not be responsible for any file damage or data loss. Certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. The TV supports FAT32 and NTFS disk formatting.
Wait a little while before each plugging and unplugging as the player may still be reading files. Failure to do so may cause physical damage to the USB player and the USB device itself. Do not pull out your drive while playing a file.
You can use USB hubs with your TV’s USB input(s). External power supplied USB hubs are recommended in such a case.
It is recommended to use the TV’s USB input(s) directly, if you are going to connect a USB hard disk.
Note: When viewing media files the Media Browser menu can only display a maximum of 1000 media files per folder.
Media Browser
You can play back music and movie files and display photo files stored on a USB storage device by connecting it to your TV. Connect a USB storage device to the USB input located on the side of the TV.

After connecting a USB storage device to your TV Sources menu will be displayed on the screen. Select the related USB input option from this menu and press OK. Media Browser menu will be displayed on the screen. Then select the file of your choice and press OK to display or play it back. You can access the content of the connected USB device any time later from the Sources menu. You can also press the Source button on the remote and then select your USB storage device from the list of sources.
You can set your media browser preferences by using the Settings menu. Settings menu can be accessed via the information bar which is displayed on the bottom of the screen while playing back a video or an audio file or displaying a picture file. Press the Info button if the information bar has disappeared, highlight the gear wheel symbol positioned on the right side of the information bar and press OK. Picture Settings, Sound Settings, Media Browser Settings and Options menus may be available depending on the media file type and the model of your TV and its features. The content of these menus may also differ according to the type of the currently open media file. Only Sound Settings menu will be available while playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be continuously played in original order

Start playback and activate

The same file will be played continuously (repeat)

Start playback and activate

All files in the list will be played once in random order

Start playback and activate ,

All files in the list will be continuously played in the same random order

To use the functions on the information bar highlight the symbol of the function and press OK. To change the status of a function highlight the symbol of the function and press OK as much as needed. If the symbol is marked with a red cross, that means it is deactivated.
FollowMe TV
With your mobile device you can stream the current broadcast from your smart TV using the FollowMe TV feature. Install the appropriate Smart Center application to your mobile device. Start the application.
For further information on using this feature refer to the instructions of the application you use.
Note: Depending on model, your TV may not support this function. The application may not be compatible with all mobile devices. Both of the devices must be connected to the same network. This feature is only functional on TV source.

English – 13 –

CEC
This function allows the user to control the CECenabled devices, that are connected through HDMI ports by using the remote control of the TV.
The CEC option in the Settings>System>Device Settings menu should be set as Enabled at first. Press the Source button and select the HDMI input of the connected CEC device from the Sources List menu. When a new CEC source device is connected, it will be listed in Sources menu with its own name instead of the connected HDMI port`s name (such as DVD Player, Recorder 1, etc.).
The TV remote is automatically able to perform the main functions after the connected HDMI source has been selected. To terminate this operation and control the TV via the remote again, press and hold the “0Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the related option under the Settings>System>Device Settings menu accordingly.
The TV supports ARC (Audio Return Channel). This feature is an audio link meant to replace other cables between the TV and an audio system (A/V receiver or speaker system).
When ARC is active, the TV will mute its other audio outputs, except the headphone jack, automatically and volume control buttons are directed to the connected audio device. To activate ARC set the Sound Output option in the Settings>Sound menu as HDMI ARC.
Note: ARC is supported only via the HDMI2 input.
Enhanced Audio Return Channel (eARC)
Similar to ARC, the eARC feature enables the transfer of the digital audio stream from your TV to a connected audio device via the HDMI cable. eARC is an improved version of ARC. It has a much higher bandwidth than its predecessor. Bandwidth represents the range of frequencies or amount of data that is being transferred at a time. Higher bandwidth translates into a higher amount of data that can be transferred. Higher bandwidth also means that digital audio signal doesn’t have to be compressed and is much more detailed, rich, and vibrant.
When eARC is enabled from the sound menu, TV first tries to establish eARC link. If eARC is supported by the connected device, the output turns into eARC mode and the “eARC” indicator can be observed on the connected device’s OSD. If an eARC link cannot be established (for example, the connected device is not supporting eARC but supporting ARC only) or if eARC is disabled from the sound menu, then TV initiates ARC.
For eARC to function properly;
The connected audio device should also support eARC.
Some HDMI cables do not have enough bandwidth to carry high-bit-rate audio channels, use an HDMI cable with eARC support (HDMI High Speed Cables with

Ethernet and the new Ultra High Speed HDMI Cable – check hdmi.org for latest info).
Set the Sound Output option in the Settings>Sound menu to HDMI ARC. The eARC option in the Sound menu will be enabled. Check to see if it is set to On. If not, set it to On.
Note: eARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with the TV. The volume can be controlled using the remote control of the TV. To activate this feature set the Sound Output option in the Settings>Sound menu as HDMI ARC. When HDMI ARC option is selected, CEC option will be set as Enabled automatically, if it is not already set. The TV speakers will be muted and the sound of the watched source will be provided from the connected sound system.
Note: The audio device should support System Audio Control
feature.
Game Mode
You can set your TV to achieve lowest latency for games. Go to Settings>Picture menu and set the Mode option to Game. Game option will be available when the TV’s input source is set to HDMI. When set the picture will be optimised for low latency.
Auto Low Latency Mode
You can also enable the ALLM (Auto Low Latency Mode) option in the Settings>System>Device Settings menu. If this function is enabled the TV automatically switches the picture mode to Game when ALLM mode signal is received from the current HDMI source. TV switches back to previous picture mode setting when the ALLM signal is lost. So you won’t need to change the settings manually.
If the ALLM option is enabled, picture mode can not be changed as long as ALLM signal is received from the current HDMI source.
In order for the ALLM feature to be functional the related HDMI source setting should be set to Enhanced. You can change this setting from the Sources>Source Settings menu or from the Settings>System>Sources menu.
E-Manual You can find instructions for your TV’s features in the E-Manual. To access the E-Manual, enter Settings menu, select Manuals and press OK. For quick access press Home button and then Info button. By using the directional buttons select a desired topic and press OK to read instructions. To close the E-Manual screen press the Exit or Home button.
Note: Depending on model, your TV may not support this
function. The content of the E-Manual may vary according
to the model.

English – 14 –

Settings Menu Content

Picture Menu Content

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Note: Available options may differ depending on the input source.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and Natural modes.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving

For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen Off or Off.
Note: Available options may differ depending on the selected Mode.

Backlight

This setting controls the backlight level. This option will be ava lable (located under the
Energy Saving setting) if the Energy Saving is set to Custom. Highlight and use Left/ Right directional buttons to set.

Picture Zoom

Sets the desired image size format.

Picture Shift

This option may be available (located under the Picture Zoom setting) depending on
the Picture Zoom setting. Highlight and press OK, then use directional buttons to shift the picture upwards or downwards.

Advanced Settings

Dynamic Contrast

You can change the dynamic contrast ratio to desired value.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are available.

White Point

If the Colour Temp option is set as Custom, this setting will be available (located under the Colour Temp setting). Increase the warmth’ orcoolness’ of the picture by pressing
Left or Right buttons.

Blue Stretch

White colour enhancement function that makes white colour more cooler in order to make more bright picture. Set as On to enable.

Micro Dimming

Low, Medium, High and Off options are available. While Micro Dimming is active, it will enhance contrast locally for each defined zone.

Noise Reduction

Low, Medium, High and Off options are available. If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the amount of noise.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes. Turn this feature to Auto when you are watching films to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

Colour Tuner

Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour and Brightness values manually.

English – 15 –

Gamut Mapping
Gamma HDMI Full Range Reset

You can use this option to set the range of colours displayed on your TV screen. When set as On, colours are set according to the source signal. When set as Off, the TV’s maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
You can use this option to set your gamma preference. Press Left/Right directional buttons to set to Normal, Bright or Dark. Note: This option may not be available depending on the TV model and its features and you may not be able to change this setting depending on the current content.
While watching from a HDMI source, this feature will be visible. You can use this feature to enhance blackness in the picture.
Resets the picture settings to factory default settings (except Game mode).

Sound Menu Content

Dolby Atmos

Your TV supports Dolby Atmos technology. By means of this technology the sound moves around you in three-dimensional space, so you feel like you re inside the action. You will have best experience if input audio bitstream is Atmos. Auto, On and Off options will be available. If set as Auto, the TV will switch between On and Off modes automatically depending on the input audio bitstream information, if the input audio bitstream is Atmos this feature will work as if it is set as On. Set as Off to disable.

Mode

Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be greyed out and unavailable if set to an option other than Off. Settings of some other options may also change depending on the current settings.

DTS Virtual:X

This feature will enhance your sound experience by providing a virtualisation of surround speakers through your TV’s speakers. You can select one of the predefined sound modes. Music, Sports,Cinema and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be greyed out and unavailable if set to an option other than Off. Settings of some other options may also change depending on the current settings.

Sound Output

Sets the sound output preference. TV, S/PDIF, HDMI ARC, Headphone Only and Lineout options will be available. There will be no sound output except through the selected option and the headphone jack. Note that, if this option is set as Headphone Only, TV speakers will be muted when headphone set is plugged in.
When you connect an external amplifier to your TV using the headphone jack, you can select this option as Lineout. If you have connected headphones to the TV, set this option as Headphone Only. Please ensure before using headphones that this menu item is set to Headphone Only. If it is set to Lineout, the output from the headphone socket will be set to maximum which could damage your hearing.
If HDMI ARC option is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as greyed out and will be unavailable.

AVL (Automatic Volume Limiting)

Sets the sound to obtain fixed output level between programmes.
If the Mode menu item is set to an option other than Off the AVL setting options will change. Auto, Night, Normal and Off options will be available. In Auto mode the TV will switch to Normal or Night mode automatically according to the current time information. If no time information is available this option will always function as Normal. When the TV switches to Night mode for the first time after setting this option as Auto, an information bar will pop up on the screen.

Please note that compared to Normal mode Night mode provides more aggressive dynamic compression control which is suitable for silent environments.

eARC

When the Sound Output option is set to HDMI ARC, the eARC menu option will be available. Otherwise, it will be greyed out. This option will be set to On by default. Set to Off to disable. Refer to CEC section for more information.

English – 16 –

Advanced Settings Equalizer Dynamic Bass DTS DRC Sound Mode Digital Out
Headphone
Balance Reset

Selects the equalizer mode. Custom settings can be made only when in User mode.
Enables or disables the Dynamic Bass.
Dynamic Range Control provides gain adjustment of the source to maintain suitable audible range at both low and high playback levels. It will function only if the source audio format is DTS. Enable or disable the DTS DRC by setting as On or Off.
You can select a sound mode (if the viewed channel supports).
Sets digital out audio type.
Sets headphone volume. Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
Sets sound balance. This feature will be activated if Sound Output option is set as TV or Headphone Only. Balance item adjusts the balance level of the TV speakers and headphones together.
Resets some of the sound settings to factory defaults.

Network Menu Content

Network Type

Disable the network connection or change the connection type.

Scan Wireless Networks

Start a search for wireless networks. This option will be available if the Network Type is set as Wireless Device.

Disconnect

To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press OK. This option will not be available if you did not connect to a wireless network. Refer to Connectivity section for more information.

Press WPS on your wifi router

If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the WPS button on it to make the connection. This option will be available if the Network Type is set as Wireless Device.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on the screen when finished.

Advanced Settings Change the IP and DNS configurations of your TV.

Networked Standby Mode

Enable or disable this feature by setting it as On or Off.

Note: For detailed information on the options of this menu refer to the Connectivity section.

Installation Menu Content

Automatic channel scan (Retune)

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.

Manual channel scan

This feature can be used for direct broadcast entry.

Network channel scan

Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial network channels.

Signal Information

You can use this menu item to monitor signal related information such as signal level/ quality, network name, etc. for available frequencies.

First time installation Deletes all stored channels and settings, resets TV to factory settings.

English – 17 –

English – 18 –

System Menu Content

Accessibility

Displays accessibility options of the TV. Some options will not be available if no channels are installed.

High Contrast

Increase the contrast of the menu options and texts to make them easier to read. WhiteBlack, Yellow-Black and Off options will be available.

Hard of Hearing Enables any special feature sent from the broadcaster.

Audio Description

A narration track will be played for the blind or visually impaired audience. Press OK to see all available Audio Description menu options. This feature is available only if the broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting mode (availability depends on the model of your TV and its features).

Dialogue Enhancement

This feature provides sound postprocessing options for speech-gated dialogue enhancement. Off, Low, Medium and High options will be available. Set according your preference.
Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV loudspeaker output.

Default preference of spoken subtitles is selected with this setting option. To make Spoken Subtitles spoken subtitles priority higher than normal ones, this option should be set to On. This
option may not be available depending on the model of your TV.

Magnification

Enables the use of button combinations to magnify the screen. On and Off options will be available. Set as On to enable.Magnification support will be enabled or disabled with long-press of the numeric button . First top-left quadrant of the screen will be zoomed. After the magnification support is enabled, long-press of the numeric buttons 2, 4, 6, 8 will move the zoomed area to up, left, right and down.

Minimap

Minimap is enabled and deactivated by default. It will be activated when Magnification feature is enabled. With this option, you can prevent magnification feature from displaying the minimap.

Click Sound

This option enables the key click sound on TV menu. Set to On to enable.

Highlight programmes with

[S] Subtitle

If this option is enabled and if any electronic programme guide event has “Subtitle” access service, these events will be highlighted with another colour.

[SL] Sign Language

If this option is enabled and if any electronic programme guide event has “Sign Language” access service, these events will be highlighted with another colour.

[AD] Audio Description

If this option is enabled and if any electronic programme guide event has “Audio Description” access service, these events will be highlighted with another colour.

Language

You may set a different language depending on the broadcaster and the country.

Conditional Access Controls conditional access modules when available.

Privacy

Privacy Settings

Manage your privacy privileges for smart TV related applications. Press OK to enter the menu and set according to your preferences.

Show All Cook es D splays all saved cook es.

Delete All Cook es

Deletes all saved cook es.

Do Not Track

You can set your preference regarding the tracking behaviour for HbbTV services using this option.

Parental

Enter correct PIN to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock, Internet Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options.
Note: Some menu options may not be available depending on the country selection in the First Time Installation. Default PIN could have been set to 0000 or 1234. If you have defined the PIN (is requested depending on the country selection) during the First Time Installation use the PIN that you have defined.

English – 19 –

Date/Time Sources
Netflix
Samba ACR
Device Settings CEC CEC Auto Power On Input Dev ce ALLM No S gnal T mer

Sets date and time.
Edit the names, enable or disable selected source options. There are also Regular and Enhanced options available for HDMI sources. These options are affecting the colour settings of the selected HDMI source. To be able to watch 4K or HDR/HLG images from an HDMI source related source setting should be set as Enhanced if the connected device is compatible with HDMI 2.0 and subsequent versions. Set as Regular if the connected device is HDMI 1.4 compatible. Set accordingly or disable the related HDMI source by setting as Disabled.
If this feature is supported by your TV, you can view your ESN() number and deactivate Netflix.() ESN number is an unique ID number for Netflix, created especially to identify your TV. Note: )RU . YGHR VWUHDPQJ D PQPXP 0EV QWHUQHW FRQQHFWRQ VSHHG V UHTXUHG ± )RU DQ H[DPSOHRIWKHUHTXUHPHQWVIRUVWUHDPQJ.FRQWHQWRXPDIQGPRUHQIRUPDWRQRQWKH1HWIO[ ZHEVWH KWWSVKHOSQHWIO[FRPHQQRGH :KHQ RX VWDUW WR VWUHDP YGHR FRQWHQW YD WKH QWHUQHW WKH TXDOW RI RXU FRQQHFWRQ ZOO EH DQDOVHG DQG WKH IXOO +’ RU . TXDOW PD WDNH D VKRUW WPH WR EH UHDOVHG RU Q WKH HYHQW RI D VORZ FRQQHFWRQ QRW EH SRVVEOH<RX VKRXOG FKHFN RXUQWHUQHWFDSDEOWHVZWKRXUQWHUQHWSURYGHUIRXDUHDWDOOXQVXUH
Samba Interactive TV powers recommendations and other apps by gathering data regarding consumption of specific on-screen content to enhance your viewing experience. Using this option you can access Samba Interactive TV settings menu, review Samba TV’s Terms of Service, Privacy Policy and manage your advertising preferences, etc. Internet connection will be required in order to access HTML based settings. You can enable or disable Interactive TV at any time from the Settings>System>Privacy>Privacy Settings menu by checking or unchecking the check box next to the related item. This option may not be available depending on the selected country during the First Time Installation process, the model of your TV and its features.
With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch to its input source automatically. Press Left or Right button to enable or disable the feature.
Press OK to open the Input Device menu screen. Using this screen you can discover and connect keyboards and mice to your TV wirelessly. Refer to Connecting Other Wireless Devices section for further information.
Note: Your TV may not be compatible with all keyboard and mouse models in the market. For more information contact your local dealer or retail outlet where you bought your TV.
ALLM (Auto Low Latency Mode) funct on allows the TV to act vate or deact vate low latency sett ngs depend ng on playback content. If th s opt on s enabled the p cture mode w ll be set to Game automat cally when ALLM mode s gnal s rece ved from the current HDMI source. Refer to Game Mode sect on for more nformat on.
If your TV does not receive any input signal (e.g. from an aerial or HDMI source) for 3 minutes, it will go into standby mode. You can enable or d sable th s funct onal ty by sett ng th s opt on accord ngly.

English – 20 –

Voice Assistant

Starts the setup process for this feature manually. If the setup is priorly completed
Works With Alexa Change Friendly Name and Sign Out options will be available. Refer to Alexa Ready section for more information.

Change Friendly Name

You can define a new name for your TV using this option.

Sign Out

You can use this option to sign out. If you sign out Works With Alexa feature will be disabled.

More

Displays other setting options of the TV.

Menu Timeout

Changes timeout duration for menu screens.

Standby Mode LED

If set as Off the standby mode LED will not light up when the TV is in standby mode.

HBBTV

You can enable or disable this feature by setting it as On or Off. Refer to HbbTV System section for further information.

Device Identification

When this option is enabled it causes a Device ID’ to be generated internally for each Web origin visited. When disabled all the currentDevice ID’s’ are cleared for each Web origin that was visited. You can enable or disable this feature by setting it as On or Off. This feature is available if channels are installed and the country option is set as Norway during the first time installation.

Software upgrade

Ensures that your TV has the latest software. Press OK to see the menu options.

Application Version

Displays current software version.

Subtitle Mode

This option is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext subtitle) if both are available. Default value is DVB subtitle. This feature is available if channels are installed and the country option is set as Norway during the
rst time installation.

Auto Power Down

Sets the desired time for the TV to automatically go into standby mode when not being operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also disable this option by setting as Off.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some items in the TV menu may not be available.

Audio Video Sharing

This feature allows you to share files stored on your smartphone or tablet pc. If you have a compatible smartphone or tablet pc and the appropriate software is installed, you can share/play photos, music and videos on your TV. See instructions of your sharing software for more information.

Power Up Mode

This setting configures the power up mode preference. Last State and Standby Mode options are available.

Virtual Remote Enable or disable the virtual remote feature.

OSS

Displays Open Source Software licence information.

Application Priority

You can set your preference regarding the priority between the broadcast applications and CICAM AppMMI applications using this option. In case a CICAM is inserted into the TV and a contention occurs between the applications the priority will be given to the selected type of application.

Dolby Notification

Sets the notification appearance preference for Dolby content. When set as On, Dolby logo will be displayed on the screen when Dolby content is detected.

Note: Some options may not be available depending on the model of your TV, its features and the selected country in the First Time Installation.

English – 21 –

General TV Operation
Using the Channel List
The TV sorts all stored stations in the channel list. You can edit this channel list, set favourites or set active stations to be listed by using the Channels menu options. Press the OK button to open the channel list. You can filter the listed channels or make advanced changes in the current list using the Filter and Edit tab options. Highlight the tab you want and press OK to see available options.
In order to add the channel you are currently watching to the Home menu, highlight the Add to Home option in the Edit tab in the Channels menu and press OK.
Managing the Favourite Lists
You can create four different lists of your favourite channels. Enter the TV>Channels menu or press the OK button in order to open the Channels menu. Highlight the Edit tab and press OK to see the editing options and select the Tag/Untag channel option. Select the desired channel on the list by pressing the OK button while the channel is highlighted. You can make multiple choices. You can also use the Tag/ Untag all option to select all channels on the list. Then press Back/Return button to return to the Edit menu options. Select Add/Remove Favourites option and press the OK button again. Favourite channel list options will be displayed. Set the desired list option to On. The selected channel/s will be added to the list. In order to remove a channel or channels from a favourite list follow the same steps and set the desired list option to Off.
You can use the filtering function in the Channels menu to filter the channels in the channel list permanently according to your preferences. For instance, using the options of the Filter tab, you can set one of your four favourite lists to be displayed every time the channel list is opened. The selected filtering options will be shown on the top of the Channels menu screen.
Configuring Parental Settings
The Parental menu options can be used to prohibit users from viewing of certain programmes, channels and usage of menus. These settings are located in the Settings> System>Parental menu.
To display parental lock menu options, a PIN should be entered. After coding the correct PIN, parental setting options will be displayed.
Menu Lock: This setting enables or disables access to all menus or installation menus of the TV.
Guidance: This setting enables or disables access to some of the MHEG applications. Disabled applications can be released by entering the right PIN.
Maturity Lock: If this option is set, the TV gets the maturity information from the broadcast and if this

maturity level is disabled, prohibits access to the broadcast.
Note: If the country option in the First Time Installation is set as France, Italy or Austria, Maturity Lock’s value will be set to 18 as default.
Child Lock: If this option is set to On, the TV can only be controlled by the remote control. In this case the control button on the TV will not work.
Internet Lock: If this option is set to ON, the internet using applications will be disabled. Set to OFF to release these applications again.
Set PIN: Defines a new PIN number.
Default CICAM PIN: This option will appear as greyed out if no CI module is inserted into the CI slot of the TV. You can change the default PIN of the CI CAM using this option.
Note: Default PIN could have been set to 0000 or 1234. If you have defined the PIN (is requested depending on the country selection) during the First Time Installation use the PIN that you have defined.
Some options may not be available depending on the model and/or on the country selection in the First Time Installation.
Electronic Programme Guide
By means of the electronic programme guide function of your TV, you can browse the event schedule of the currently installed channels on your channel list. It depends on the related broadcast whether this feature is supported or not.
To access the programme guide, press the Guide button on your remote. You can also use the Guide option under TV menu. There are 2 different types of schedule layouts available, Timeline Schedule and Now/Next. To switch between these layouts highlight the tab with the name of the alternative layout on the upper side of the screen and press OK.
Use the directional buttons to navigate through the programme guide. Use the Back/Return button to use the tab options on the upper side of the screen.
Timeline Schedule
In this layout option, all events of the listed channels will be displayed by timeline. You can use the directional buttons to scroll through the list of the events. Highlight an event and press OK to display event options menu.
Press Back/Return button to use available tab options. Highlight Filter tab and press OK to see the filtering options. To change the layout highlight Now/Next and press OK. You can use the Previous Day and Next Day options to display the events of the previous and next day.
Highlight Extras tab and press OK to access below options.
Highlight Genre: Displays Highlight Genre menu. Select a genre and press OK. The events in the

English – 22 –

programme guide matching the selected genre will be highlighted. Guide Search: Displays searching options. Using these options, you can search the programme guide database in accordance with the selected criteria. Matching results will be listed. Now: Displays current event of the highlighted channel. Zoom: Highlight and press OK to see events in a wider time interval.
Now/Next Schedule
In this layout option, only the current and next events of the listed channels will be displayed. You can use the directional buttons to scroll through the list of the events.
Press Back/Return button to use available tab options. Highlight Filter tab and press OK to see the filtering options. To change the layout highlight Timeline Schedule and press OK.
Event Options
Use the directional buttons to highlight an event and press OK button to display Options menu. The following options are available.
Select Channel: Using this option, you can switch to the selected channel in order to watch it. The programme guide will be closed. More Info: Display detailed information on the selected event. Use up and down directional buttons to scroll through the text. Set Timer on Event / Delete Timer on Event: Select Set Timer on Event option and press OK. You can set timers for future events. The event will be added to Timers list. To cancel an already set timer, highlight that event and press the OK button. Then select Delete Timer on Event option. The timer will be cancelled. Notes: You cannot switch to any other channel while there is an active timer on the current channel.
It is not possible to set timer for two or more individual events at the same time interval.
Integrated Catch-Up Services
You can enjoy Freeview Play catch-up TV services that work directly through the electronic programme guide. Whilst you are on a channel use the directional buttons to scroll back in time through the timeline-based guide. You will see content from last few days. Available catchup content may change according to broadcasters and will be marked with a play icon. Highlight the content you want to play back and press the OK button.
Make sure that your TV is connected to your home network in order to use the catch-up services. For further information regarding this matter and other requirements for Freeview Play services refer to the Connectivity and Freeview Play Platform sections.

Teletext Services (where available)
Press the Text button to enter. Press again to activate mix mode, which allows you to see the teletext page and the TV broadcast at the same time. Press once more to exit. If available, sections in the teletext pages will become colour- coded and can be selected by pressing the coloured buttons. Follow the instructions displayed on the screen.
Digital Teletext
Press the Text button to view digital teletext information. Operate it with the coloured buttons, directional buttons and the OK button. The operation method may differ depending on the content of the digital teletext. Follow the instructions displayed on the digital teletext screen. When the Text button is pressed again, the TV returns to television broadcast.
MHEG Teletext
With digital terrestrial broadcasting (DVB-T), in addition to pictures and sound, you can also view digital teletext. Digital teletext is sometimes broadcast at the same time with the normal broadcasting.
Press the Text or Red button
The digital teletext information appears
Operate it with the coloured buttons, directional buttons and OK button
The operation method may differ depending on the content of the digital teletext. Follow the instructions displayed on digital teletext screen. Press the Text button to return to television broadcast.
BBC Red Button+ (RB+)
While watching BBC channels, press the Red button or Text button to access Red Button+ services provided by the BBC. On the opening page you can access BBC’s main services such as BBC iPlayer, BBC News, BBC Sport and many others. There are also links to the home pages of the related applications available. Use the navigation buttons on the TV’s remote control to move through the application. Press Exit button to close and exit.
Software Upgrade
Your TV is capable of finding and updating the software automatically via the broadcast signal or via the internet.
Software upgrade search via user interface
On the main menu select Settings>System and then More. Navigate to Software upgrade and press the OK button. Then select Scan for upgrade and press OK button to check for a new software upgrade.
If a new upgrade is found, it starts to download the upgrade. After the download is completed, a warning will be displayed, press OK button to complete software upgrade process and restart TV.

English – 23 –

3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock if Automatic scanning option is set to Enabled and if the TV is connected to an aerial signal or to the Internet. If a new software is found and downloaded successfully, it will be installed at the next power on.
Note: Do not unplug the power cord while led is blinking during the reboot process. If the TV fails to come on after the upgrade, unplug, wait for two minutes then plug it back in.
All updates are automatically controlled. If a manual search is carried out and no software is found then this is the current version.
Troubleshooting & Tips
TV will not turn on
Make sure the power cord is plugged in securely to a wall outlet. Press the control button on the TV or the Standby button on the remote.
Poor picture
Check if you have correctly tuned the TV.
Low signal level can cause picture distortion. Please check antenna connections.
Check if you have entered the correct channel frequency if you have performed manual tuning.
No picture
TV is not receiving any signal. Make sure the correct source has been selected.
Is the antenna connected properly?
Is the antenna cable damaged?
Are suitable plugs used to connect the antenna?
If you are in doubt, consult your dealer.
No sound
Check if the TV sound is muted. Press the Mute button or increase the volume to check.
Sound is coming from only one speaker. Check the balance settings from the Sound menu.
Check Sound Output option is set correctly from Sound menu.
Remote control – no operation
The batteries may be exhausted. Replace the batteries.
The batteries maybe inserted incorrectly. Refer to the section “Inserting the Batteries into the Remote”.
No signal on an input source
It is possible that no device is connected.
Check the AV cables and connections from your device.
Check the device is switched on.

HDMI Signal Compatibility

Source HDMI

Supported Signals

480i

60Hz

480p

60Hz

576i, 576p 50Hz

720p

50Hz,60Hz

1080i

50Hz,60Hz

1080p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

3840x2160p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

4096x2160p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

Available O O O O O
O
O
O

(X: Not Available, O: Available)
In some cases a signal on the TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

English – 24 –

Supported File Formats for USB Mode
Video File Formats

File Extension

Format Video Codec

Audio

.mpg/.mpeg/.dat/ .vob

MPEG1/2, H.264, VC1

MPEG Layer 1/2/3, AC3

.ts/.trp/.m2ts

MPEG1/2, H.264, VC1, MPEG Layer 1/2/3, AC3,

HEVC/H.265

E-AC3

.avi

MPEG1/2, MPEG4, H.264, MJPEG

MPEG Layer 1/2/3, AC3, AAC, WMA

.mp4/.m4a/.m4v/ MPEG1/2, H.263,

.mov/.qt/.3gp/.3g2/ MPEG4, H.264,

.3gpp

HEVC/H.265, AV1

MPEG Layer 1/2/3, AAC LC, AC3

.mkv

MPEG 1/2, MPEG4,

MPEG Layer 1/2/3, AAC,

H.264, HEVC/H.265, AV1 AC3

.flv

Sorenson Spark, MPEG4, MPEG Layer 3, ADPCM,

H.264

AAC LC

.asf/.wmv

MPEG4, WMV3, VC1

WMA, AMR-NB

.webm

VP9, VP8, AV1

OPUS, Vorbis

Picture File Formats
File Extension .jpg/.jpeg .bmp .gif .png

Format
JPEG, PJPEG BMP GIF PNG

Audio File Formats
File Extension
.mp3 .ac3 .aac .wma .wav .flac .m4a

Format Video Codec
M4A

Audio
mp3 ac3 AAC WMA MPEG Layer 1/2/3, AAC, PCM FLAC AAC

Subtitle File Formats

External Subtitles

Extension

Specification

.ssa

SubStation Alpha

.ass

Advanced SubStation Alpha

.srt

Subripper

.sub

Micro DVD / SubViewer

.txt

Micro DVD / TMPlayer / MPL2

.smi

Sami

Internal Subtitles

Extension

Specification

.mkv

VOBSub

.mkv

ASS / SSA / TEXT

.dat, .mpg, .mpeg, .vob

DVD Subtitle

.mp4

DVD Subtitle, TEXT

English – 25 –

English – 26 –

Supported DVI Resolutions
When connect ng dev ces to your TV’s connectors by us ng DVI converter cable (DVI to HDMI cable – not suppl ed), you can refer to the follow ng resolut on nformat on.

640×480 800×600 1024×768 1280×768 1280×960 1360×768 1366×768 1280×1024 1400×1050 1600×900 1920×1080

56Hz x

60Hz
x x x x x x x x x x x

66Hz

70Hz x x

72Hz

7 Hz x x x x
x

Connectivity
Wired Connectivity To Connect to a Wired Network
You must have a modem/router connected to an act ve broadband connect on. Connect your TV to your modem/router v a an Ethernet cable. There s a LAN port at the rear (back) of your TV.

Broadband ISP connection LAN (Ethernet) cable LAN input on the rear side of the TV You m ght be able to connect your TV to your LAN depend ng on your network’s conf gurat on. In such a case, use an Ethernet cable to connect your TV d rectly to the network wall outlet.

Internet Speed Test
Highlight Internet Speed Test and press the OK button. TV will check the internet connection bandwidth and display the result when complete.
Advanced Settings
Highlight Advanced Settings and press the OK button. On the next screen you can change the IP and DNS settings of the TV. Highlight the desired one and press Left or Right button to change the setting from Automatic to Manual. Now you can enter the IP and / or DNS values manually. Select the related item in the drop down menu and enter the new values using the numeric buttons of the remote. Highlight Save and press the OK button to save settings when complete.
Other Informat on
The status of the connect on w ll be d splayed as Connected or Not Connected and the current IP address, f a connect on s establ shed. The MAC address of your TV w ll also be d splayed on the screen.
Wireless Connectivity
To Connect to a Wireless Network
You must have a w reless modem/router connected to an act ve broadband connect on.

English – 27 –

Network wall socket LAN input on the rear side of the TV Configuring Wired Device Settings To conf gure w red connect on sett ngs go to the Settings>Network menu. Network Type Set Network Type as Wired Device if you are connecting via an Ethernet cable.

Broadband ISP connection
A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous 2.4 and 5 GHz bands is designed to increase bandwidth. These are optimised for smoother and faster HD video streaming, file transfers and wireless gaming.
The frequency and channel differ depending on the area.
The transm ss on speed d ffers depend ng on the d stance and number of obstruct ons between the transm ss on products, the conf gurat on of these products, the rad o wave cond t ons, the l ne traff c and the products that you use. The transm ss on may also be cut off or may get d sconnected depend ng on the rad o wave cond t ons, DECT phones or any

English – 28 –

other WLAN 11b appl ances. The standard values of the transm ss on speed are the theoret cal max mum values for the w reless standards. They are not the actual speeds of data transm ss on.
The location where the transmission is most effective differs depending on the usage environment.
The TV supports 802.11 a, b, g & n type modems. It is highly recommended that you should use the IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.
You must change your modem’s SSID when there are any other modems around with the same SSID. You can encounter connection problems otherwise. Use a wired connection if you experience problems with a wireless connection.
Configuring Wireless Device Settings
To conf gure w reless connect on sett ngs go to the Settings>Network menu.
Network Type
Set Network Type as W reless Dev ce to start connect on process.
Scan Wireless Networks
H ghl ght Scan W reless Networks opt on and press OK to start a search for ava lable w reless networks. All found networks w ll be l sted. H ghl ght your des red network from the l st and press OK to connect. A network with hidden SSID can not be detected by other devices. If you want to connect to a network with hidden SSID, scroll down the list of detected wireless networks, highlight the Add New Network option and press OK. Enter the name of the network and select the security type using the related options to connect.
Note: If the modem supports N mode, you should set N mode settings.
If the selected network s password-protected, enter the correct key by us ng the v rtual keyboard. You can use th s keyboard v a the d rect onal buttons and the OK button on the remote control.
Wa t unt l the IP address s shown on the screen. Th s means that the connect on s now establ shed.
Disconnect
If you have connected to a wireless network Disconnect option will appear in the Network menu and your wireless network profile will also be saved, thus your TV will connect to the same network automatically whenever you switch to wireless connection. To d sconnect from a w reless network and delete the saved wireless network profile, h ghl ght Disconnect and press OK.

Press WPS on your wifi router
If your router has WPS, you can directly connect to the modem/router without entering a password or adding the network first. Highlight Press WPS on your wifi router option and press OK. Go to your modem/router device and press the WPS button on it to make the connection. You will see a connection confirmation on your TV once the devices have paired. Select OK to proceed. No further configuration is required.
Internet Speed Test
H ghl ght Internet Speed Test and press the OK button to check your nternet connect on speed.
Advanced Settings
H ghl ght Advanced Sett ngs and press the OK button to open the advanced sett ng menu. Use d rect onal and numer c buttons to set. The procedure s the same as expla ned for w red connect v ty. H ghl ght Save and press the OK button to save sett ngs when complete.
Networked Standby Mode
You can enable or disable the Networked Standby Mode feature by setting this option accordingly. Refer to Networked Standby Mode section for further information.
Other Informat on
The status of the connect on w ll be d splayed as Connected or Not Connected and the current IP address, f a connect on s establ shed. The MAC address of your TV w ll also be d splayed on the screen.
Connect ng to your mob le dev ce v a WLAN
If your mob le dev ce has WLAN feature, you can connect t to your TV v a a router, n order to access the content n your dev ce. For th s, your mob le dev ce must have an appropr ate shar ng software.
Connect your TV to your router by follow ng the steps ment oned n the sect ons above.
Afterwards, connect your mob le dev ce to the router and then act vate the shar ng software on your mob le dev ce. Then, select f les that you want to share w th your TV.
If the connect on s establ shed correctly, you w ll be able to access the shared f les nstalled on your mob le dev ce v a the Aud o V deo Shar ng feature of your TV.
H ghl ght the Aud o V deo Shar ng opt on n the Sources menu and press OK, ava lable med a server dev ces n the network w ll be d splayed. Select your mob le dev ce and press the OK button to cont nue.
If available, you can download a virtual remote controller application from the server of your mobile device application provider.
Note: This feature may not be supported on all mobile devices.

English – 29 –

Networked Standby Mode
Networked Standby Mode is a standard that allows a device to be turned on or woken up by a network message. The message is sent to the device by a program executed on a remote device connected to the same local area network, such as a smartphone.
To enable this feature set the Networked Standby Mode option in the Network menu as On. It is necessary that both the device, from which the network message will be sent to the TV, and the TV are connected to the same network. Networked Standby Mode feature is only supported for Android OS devices and can only be used via YouTube and Netflix applications.
In order to use this feature the TV and the remote device should be connected at least once while the TV is on. If the TV is powered off, the connection should be re-established, the next time it is switched on. Otherwise this feature will be unavailable. This does not apply, when the TV is switched into the standby mode.
If you want your TV to consume less power in standby mode, you can disable this feature by setting the Networked Standby Mode option as Off.
Wireless Display
Wireless Display is a standard for streaming video and sound content. This feature provides the ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of screens including graphical, video and audio content between your mobile device and TV.
Press the Source button on the remote and switch to Wireless Display source.
A screen appears stating that the TV is ready for connection.
Open the sharing application on your mobile device. These applications are named differently for each brand, refer to the instruction manual of your mobile device for detailed information.
Scan for devices. After you select your TV and connect, the screen of your device will be displayed on your TV.
Note: This feature can be used only if the mobile device supports this feature. If you experience problems with the connection check if the operating system version you use supports this feature. There may be incompatibility problems with the operating system versions which are released after the production of this TV. Scanning and connecting processes differ according to the program you use.

Connectivity Troubleshooting
Wireless Network Not Available
Ensure that any firewalls of your network allow the TV wireless connection.
Try search ng for w reless networks aga n, us ng the Network menu screen.
If the wireless network does not function properly, try using the wired network in your home. Refer to the Wired Connectivity section for more information on the process.
If the TV does not funct on us ng the w red connect on, check the modem (router). If the router does not have a problem, check the nternet connect on of your modem.
Connection is Slow
See the nstruct on book of your w reless modem to get nformat on on the nternal serv ce area, connect on speed, s gnal qual ty and other sett ngs. You need to have a h gh speed connect on for your modem.
Disruption during playback or slow reactions You could try the following in such a case:
Keep at least three metres distance from microwave ovens, mobile telephones, bluetooth devices or any other WLAN compatible devices. Try changing the active channel on the WLAN router.
Internet Connection Not Available / Aud o V deo Shar ng Not Working
If the MAC address (a un que dent f er number) of your PC or modem has been permanently reg stered, t s poss ble that your TV m ght not connect to the nternet. In such a case, the MAC address s authent cated each t me when you connect to the nternet. Th s s a precaut on aga nst unauthor sed access. S nce your TV has ts own MAC address, your nternet serv ce prov der cannot val date the MAC address of your TV. For th s reason, your TV cannot connect to the nternet. Contact your nternet serv ce prov der and request nformat on on how to connect a d fferent dev ce, such as your TV, to the nternet.
It s also poss ble that the connect on may not be ava lable due to a f rewall problem. If you th nk th s causes your problem, contact your nternet serv ce prov der. A f rewall m ght be the reason of a connect v ty and d scovery problem wh le us ng the TV n Aud o V deo Shar ng mode or wh le brows ng v a Aud o V deo Shar ng feature.
Invalid Domain
Ensure that you have already logged on to your PC w th an author sed username/password and also ensure that your doma n s act ve, pr or to shar ng any f les n your med a server program on your PC. If the doma n s nval d, th s m ght cause problems wh le brows ng f les n Aud o V deo Shar ng mode.

English – 30 –

Using Audio Video Sharing Network Service
Aud o V deo Shar ng feature uses a standard that eases the v ew ng process of d g tal electron cs and makes them more conven ent to use on a home network.
Th s standard allows you to v ew and play photos, mus c and v deos stored on the med a server connected to your home network.
1. Server Software Installation The Aud o V deo Shar ng feature cannot be used if the server program is not installed onto your PC or f the requ red med a server software s not nstalled onto the compan on dev ce. Prepare your PC with a proper server program.
2. Connect to a W red or W reless Network See the Wired/Wireless Connectivity sections for detailed configuration information.
3. Enable Audio Video Sharing
Enter the Settings>System>More menu and enable the Audio Video Sharing option.
4. Play Shared F les v a Med a Browser H ghl ght the Aud o V deo Shar ng opt on n the Sources menu by using the directional buttons and press OK. Ava lable med a server dev ces n the network w ll be l sted. Select one and press OK to cont nue. The media browser will then be displayed.
Refer to the Media Browser menu section for further information on file playback.
If a problem occurs with the network, switch your television off at the wall socket and back on again.
PC/HDD/Media Player or any other devices that are compatible should be used with a wired connection for higher playback quality.
Use a LAN connection for quicker file sharing between other devices like computers.
Note: There may be some PC’s which may not be able to utilise the $XGR9GHR6KDUQJ feature due to administrator and security settings (such as business PC’s).
Apps
You can access the applications installed on your TV from the Home menu. Press the Home button on the remote, Home menu will be displayed. Highlight an app and press OK to launch.
In order to manage the apps installed on your TV, you can use the More Apps option in the TV menu. You can add an installed app to Home menu, launch or remove it. Highlight an app and press OK to see the available options.
You can add new apps from the application market. To access the market highlight the Market option in the TV menu and press OK. Available apps will be displayed. You can also access the application market from within the More Apps menu.

You can reset your customisations on the Home menu, including app-related ones, to defaults using the Reset Apps option in the TV menu (availability depends on TV model and its features). Highlight this option and press OK. A confirmation message will be displayed. Highlight Yes and press OK to proceed. Note that you will not be able to perform this operation again within the next few minutes.
Notes: Possible application dependent problems may be caused by the content service provider.
Third party internet services may change, be discontinued or restricted at any time.
Freeview Play Platform
Freeview Play platform provides catch-up TV and On Demand services. Simply press the Freeview Play button on your remote control to connect to the Freeview Play platform.
The Freeview Play platform can also be accessed from the Home and TV menus. Press Home button and select Home or TV. Then highlight Freeview Play and press the OK button.
You will have to agree to the terms and conditions for Freeview Play services first if you did not agree to them during the First Time Installation. Highlight Yes and press OK on the remote to confirm and proceed.
Integrated TV Player applications will be displayed. Select one and press the OK button. Then select a content that you want to play back and press the OK button to watch.
Catch-up content can also be accessed and played back directly from the TV Guide. Refer to the section Electronic Programme Guide for more information.
Requirements
The Freeview Play services may only be used if the following requirements are fulfilled:
Connecting the TV to the internet. A minimum broadband speed of 2Mbps is required for proper operation of catch-up and on demand services.
Agreeing to the terms and conditions of Freeview Play
Note: Freeview Play platform usage will count towards any monthly broadband data allowance. Only selected channels provide 7-day catch-up.
Internet Browser
To use the internet browser, enter the Home menu f rst. Then launch the nternet browser appl cat on wh ch has an orange coloured logo w th earth symbol on t.
In the initial screen of the browser, the thumbnails of the predefined (if any) links to web sites available will be displayed as Speed Dial options along with the Edit Speed Dial and the Add to Speed Dial options.
To navigate the web browser, use the directional buttons on the remote or a connected mouse. To see

English – 31 –

the browser options bar, move the cursor to the top of the page. History, Tabs and Bookmarks options and the browser bar which contains previous/next buttons, the refresh button, the address/search bar, the Speed Dial and the Vewd buttons are available.
To add a desired website to the Speed Dial list for quick access, move the cursor to the top of the page. The browser bar will appear. Highlight the Speed Dial button and press the OK button. Then select Add to Speed Dial option and press the OK button. Fill in the blanks for Name and Address, highlight OK and press the OK button to add. Whilst you are on the site you wish to add to the Speed Dial list, highlight the Vewd button and press the OK button. Then highlight Add to Speed Dial option in the submenu and press the OK button again. Name and Address will be filled automatically according to the site you are visiting. Highlight OK and press the OK button to add.
You can also use the Vewd menu options to manage the browser. Highlight the Vewd button and press the OK button to see available page specific and general options.
There are various ways to search or visit websites using the web browser.
Enter the address of a website(URL) into the search/ address bar and highlight the Submit button on the virtual keyboard and press the OK button to visit the site.
Enter keyword/s into the search/address bar and highlight the Submit button on the virtual keyboard and press the OK button to start a search for the related websites.
Highlight a Speed Dial thumbnail and press the OK button to visit the related website.
Your TV is compatible with USB mice. Plug your mouse or wireless mouse adaptor into the USB input of your TV for easier and quicker navigation.
Some web pages include flash content. These are not supported by the browser.
Your TV does not support any download processes from the internet via the browser.
All sites on the internet might not be supported. According to the site; content problems may occur. In some circumstances video content might not be able to be played.
HBBTV System
HbbTV (Hybrid Broadcast Broadband TV) is a new industry standard that seamlessly combines TV services delivered via broadcast with services delivered via broadband and also enables access to Internet only services for consumers using connected TVs and settop boxes. Services delivered through HbbTV include traditional broadcast TV channels, catch-up services, video-on- demand, electronic programme guide,

interactive advertising, personalisation, voting, games, social networking and other multimedia applications.
HbbTV applications are available on channels where they are signalled by the broadcaster. The broadcaster marks one application as “autostart” and this one is started by the platform automatically. The autostart applications are generally launched with a small red button icon to notify the user that there is an HbbTV application on that channel. Press the red button to open the application page. After the page is displayed you can go back to the initial red button icon state by pressing the red button again. You can toggle between the red button icon mode and full UI mode of the application via pressing red button. It should be noted that the red button switching capability is provided by the application and some applications may behave differently (other colour buttons such as green, yellow, blue, may be defined for some other functions, e.g. shortcuts). If you switch to another channel while an HbbTV application is active (either in red button icon mode or full UI mode), the following scenarios can occur.
The application can continue running.
The application can be terminated.
The application can be terminated and another autostart red button application can be launched.
HbbTV allows the applications to be retrieved both from broadband or broadcast. The broadcaster may enable both ways or one of them. If the platform does not have an operational broadband connection, the platform can still launch applications transmitted on broadcast.
The autostart red button applications generally provide links to other applications. The user then can switch to other applications by using the links provided. The applications should provide a way to terminate themselves, usually Exit button is used for this.
HbbTV applications use keys on the remote control to interact with the user. When an HbbTV application is launched, the control of some keys are owned by the application. For example, numeric channel selection may not work on a teletext application where the numbers indicate teletext pages.
HbbTV requires AV streaming capability for the platform. There are numerous applications providing VOD (video on demand) and catch-up TV services. The user can use play, pause, stop, forward, and rewind keys on the remote control to interact with the AV content.
If you need to change the audio description settings of your TV you should do it before a HbbTV playback starts. You will not be able to access related settings during a playback. Go to the Settings>System>Accessibility>Audio Description menu and adjust according to your need.

English – 32 –

Note: You can enable or disable this feature from the More menu in Settings>System menu. Depending on the model of your TV and the selected country option in the First Time Installation this feature might be available in the Settings>System>Privacy>Privacy Settings menu instead of the Settings>System>More menu.
Smart Center
Smart Center is a mobile application running on iOS and Android platforms. With your tablet or phone, you can easily stream your favourite live shows and programmes from your smart TV. Also; you can launch your applications, use your tablet as a remote control for your TV and share media files.
Note: Being able to use all functions of this application depends on the features of your TV.
Getting Started
To be able to use internet based features, your modem/ router must be connected to the internet.
IMPORTANT: Make sure the TV and mobile device are connected to the same network.
For media sharing feature Audio Video Sharing option should be enabled (if available). Press the Home button on the remote, select Settings>System>More menu and press OK. Highlight Audio Video Sharing and change as Enabled. Your TV is ready to connect to your mobile device now. Install the Smart Center application onto your mobile device.
Start the smart center application. If all connections are configured properly, you will see your TV’s name on your mobile device. If your TV’s name doesn’t appear on the list, wait a while and tap on the Refresh widget. Select your TV from the list.
Mobile Device screen
On the main screen you can find tabs to access various features.
The application retrieves actual channel list from TV first when it starts.
MY CHANNELS: The programmes of the first four channels from the channel list retrieved from the TV are shown. You can change the listed channels. Press on the channel thumbnail and hold. A list of channels will be displayed and you can choose your desired channel to be replaced.
TV: You can watch content through the TV tab. In this mode you can navigate through the channel list retrieved from your TV and click on thumbnails to view the detail pages.
RECORDINGS: You can view your active recordings (if available) and reminders through this tab. To delete any item, simply press on the delete icon found on each row.
EPG(Electronic programme guide): You can view the broadcast schedules of selected channel lists through this tab. You can also navigate through channels by pressing on the selected channel on the

EPG grid. Please note that updating / refreshing the EPG information may take a while depending on your network and web service quality.
Note: Internet connection is required for WEB based EPG information.
SETTINGS: Configure the application to your liking. You can change;
Auto-lock (Only in iOS): The screen of the device automatically turns off after a certain amount of time. Default is off, which means the screen will always stay on.
Auto-enable FollowMeTV: FollowMeTV function (if available) will start automatically when this setting is enabled. Default is disabled.
Auto-connection to TV: When enabled, your mobile device will automatically connect to last connected TV and skips the TV search screen.
Change TV (Only in iOS): Shows the currently connected TV. You can press on this setting to go to the “TV search” screen and change to a different TV.
Edit custom channel list: You can edit your custom channel list using this setting.
Choose channel list source: You can choose the channel list source to be used in the application. The options are “TV List” and “Custom List”. Additionally you can activate “Remember my choice” option to set the selected channel list source as a constant choice. In this case if the selected source is available it will be used in the application.
Version No: Displays the current version of the application.
Detail Page
To open detail page tap on a programme. On the detail page screen you can get detailed information of the programmes you select. There are “Details”, “Cast&Crew” and “Videos” tabs to find on this page.
DETAILS: This tab provides summary and information about the selected programme. Also there are links to Facebook and Twitter pages of the programme selected.
CAST&CREW: Shows all the people contributed to the current programme.
VIDEOS: Provides videos on YouTube related to the selected programme.
Note: For some functions an internet connection may be required.
FollowMe TV Feature (if available) Tap on the FOLLOW ME TV widget located at the bottom left of the screen of your mobile device to change the layout for FollowMe TV feature.
Tap the play icon to start streaming of the content from the TV to your mobile device. Available if your device is in your router`s operational range.
Mirror Mode

English – 33 –

This mode of FollowMe TV feature is enabled by default and allows streaming the content from any other selected TV sources and Media Browser.
Notes: Note that only digital (DVB-T/C/S) SD and HD channels are supported.
Multilanguage audio support and subtitle on/off features are not functional.
The streaming performance may change depending on the quality of your connection.
Media Share Page To access the Media Share widget tap on the Uparrow on the bottom left side of the screen. If the Media Share widget is pressed, a screen is displayed where you can select the media file type to share with your TV.
Note: Not all image file formats are supported. This function will not work if Audio Video Sharing feature is not supported.
Smart Remote Feature You can use your mobile device as a remote control for your TV once it has connected to the TV. To use smart remote’s full features tap on the Up-arrow on the bottom left side of the screen.
Voice Recognition You can tap on the Microphone( ) widget and manage your application, giving voice commands such as “Volume Up/Down!”, “Programme Up/Down!”.
Note: This feature is only available for android based devices.
Keyboard Page The keyboard page can be opened in two ways; by pressing the Keyboard( ) widget on the application screen or automatically by receiving a command from the TV.
Requirements 1. Smart TV 2. Network connection 3. Mobile device based on Android or iOS platform
(Android OS 4.0 or higher; iOS 6 or higher version)
4. Smart Center app.(to be found on online application stores based on Android and iOS platforms)
. Router modem 6. USB storage device in FAT32 format (required for
USB Recording feature, if available)

Alexa Ready
Alexa is Amazon’s cloud-based voice service available on many voice controlled assistant devices. Your TV is compatible with and ready to be utilised with Alexa devices.
Works With Alexa
By means of the Works With Alexa feature you can control the functions of your TV with Alexa devices. In order to do this, the setup process should be completed. The setup can be carried out by using the Works With Alexa option in the Settings>System>Voice Assistant menu.
Setup process
The wizard will guide you through the setup process.
On the first screen you will be informed about the feature. Highlight Start and press OK to proceed.
An authentication code will be created and displayed on the screen. Use your computer or any other device with internet access to go to the internet address (URL) shown on the screen. You will be directed to a page where you can sign in to your Amazon account first, if you are not already signed in. Then you will be directed to a page where you can enter the authentication code you see on the TV and link your TV to your Amazon account.
If the linking process was successful you will be asked to determine a name for your TV, called Friendly Name'(FN). AFriendly Name’ is a name that reminds you of your TV, such as Living Room TV’,Kitchen TV’, `Dining Room TV’, etc. Choose an easy-to-say name. You will say this name to tell Alexa which TV to control. When you are done, highlight OK and press OK.
Examples about the use of the feature will be displayed on the next screen. Press OK to finish the setup.
Once the setup is complete, you will be able to control the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.

Notes:)RU$QGURGGHYFHV1RUPDOPGS/DUJHKGSDQG ([WUD/DUJH[KGSVFUHHQV]HVDUHVXSSRUWHG’HYFHVZWK ´RUVPDOOHUVFUHHQV]HVDUHQRWVXSSRUWHG
)RU26GHYFHVDOOVFUHHQV]HVDUHVXSSRUWHG
User interface of the Smart Center application is subject to change according to version installed on your device.

English – 34 –

Example Commands Here are some voice commands that you can use:

Command

Function

Alexa, turn on `FN’

Powers on the TV

Alexa, turn o `FN’

Powers o the TV

Alexa, play `FN’

Starts media playback

Alexa, pause `FN’

Pauses media playback

Alexa, resume `FN’

Resumes media playback

Alexa, stop `FN’

Stops media playback

Alexa, fast forward on `FN’

Advances media in fast forward mode

Alexa, rewind on `FN’

Rewinds media

Alexa, set the volume of `FN’ to 50

Sets the volume to the speci ed level

Alexa, turn the volume up Increases volume by 10

on `FN’

units

Alexa, turn the volume down on `FN’

Decreases volume by 10 units

Alexa, mute `FN’

Mutes sound

Alexa, unmute `FN’

Unmutes sound

Alexa, change the input to “input_name” on `FN’

The TV switches to the input source with the speci ed name (e.g. HDMI 1)

Alexa, change channel to “channel_number” on `FN’

The TV switches to the channel with the speci ed number (e.g. channel 200)

Alexa, change channel to “channel_name” on `FN’

The TV switches to the channel with the speci ed name

Alexa, channel up on `FN’

The TV switches to the next higher channel, if any available

Alexa, channel down on `FN’

The TV switches to the next lower channel, if any available

Alexa, next channel on `FN’

The TV switches to the next channel on the channel list

FN is the abbreviation for `Friendly Name’.

DVB functionality information
This DVB receiver is only suitable for use in the country which it was designed to be used in.
Although this DVB receiver conforms to the latest DVB specifications at the time of manufacture, we cannot guarantee compatibility with future DVB transmissions due to changes that may be implemented in broadcast signals and technologies.
Some digital television functions may not be available in all countries.
We continually strive to improve our products; therefore, specifications may change without prior notice.
For advice on where to purchase accessories, please contact the store where you purchased your equipment.)

VESA WALL MOUNT MEASUREMENTS

He e

W

H

Sizes (mm)

200

200

S e Sizes

min. (mm)

10

e th (X)

max. (mm)

13

he ( )

M6

Hereby, VESTEL Elektronik Sanayi ve Ticaret A. ., declares that the radio equipment type TFT IDTV is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: doc.vosshub.com

English – 35 –

English – 36 –

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>