EMEET S600 4K Webcam User Guide
- June 11, 2024
- eMeet
Table of Contents
S600 4K Webcam
User Guide
EMEET SmartCam 5600
Quick Start Guide
WHAT’S IN THE BOX
- Webcam
- USB cable
- Carrying case
- Quick Start Guide
Overview
- Privacy Cover Rotary Switch
- Autofocus 4K Ultra HD lens
- Dual microphone
- LED light
- Adjustable clip/stand
- USB-C port
- 1/4 inch tripod thread
Install
Install the
camera
-
Install on monitor/laptop
Mount the camera on the monitor or laptop at the desired position or angle, making sure it fits snugly. -
Mount on a tripod
Mount on a tripod via 1/4″ tripod thread at the bottom of the camera stand. *Tripod is sold separately.
Connect
Connect to computer
- Plug the USB cable into the camera.
- Plug the other end of the USB cable into the computer.
Set up
Set up the S600 camera
- Open the application that the camera will work with, and change its default camera and microphone to S600.
- When the camera starts working, the LED indicator in the front will light up.
eMeetLink
Use eMeetLink
- Download eMeetLink at www.emeet.com
- Open eMeetLink, click [Customizable] under [Filter] to enable the configuration of image parameters
- How to solve the problem of image flickering: Change the power line frequency (Hz) to the one used in your country via eMeetLink. The power line frequency is different for different countries or regions. 50Hz and 60Hz are most common. If the image flickers, you can switch to 50Hz/60Hz.
- Please download eMeetLink to explore more of its functions.
Privacy Cover
Use the privacy
cover
- Rotate the privacy cover switch to open or close the privacy cover in case of protecting personal privacy.
EMEET One (1) Year Limited Warranty
Limited one (1) Year Warranty with EMEET proof of purchase. The warranty does
not cover normal wear and tear or damage caused by accidents or misuse. To
protect your rights, please keep the proof of pur- chase.
For service, please contact us : www.emeet.com
Safety Guide
Caution: To avoid electrical shock, do not open the housing of this
product. In addition, users do not need to use the product’ s internal parts.
To repair the product, please contact qualified maintenance personnel or mail
the product to our after-sales department.
- Please read this guide carefully.
- Please keep this guide.
- Please observe all warnings.
- Please follow all instructions.
- When cleaning this product, use a dry cloth only.
- Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
- Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifiers) that produce heat.
- Do not use this product if you must remain alert of your surroundings, for example, while driving a car or riding a bike.
- Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such asswimming or surfing.
- Please protect the USB cable. Do not step on or apply pressure on them. Do not pull on the product’ s plug, socket, or cable outlet.
- It is recommended that users use the accessories that have been specified by the vendor.
- When not using the webcam, please unplug the device from the USB port and turned off the power.
- To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, if thepower cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product; the product has come into contact with rain or moisture,the product cannot operate properly, or if the product has fallen.
EU/UKCA Compliance
Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. Corporation declares that the
equipment is in compliance with <Directive 2014/30/EU /EMCR 2016 (SI
2016/1091)>. The suitable temperature for the product and accessories is
0-40°C.
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received,including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’ s authority to operate the equipment.
UK REP:
Obelis UK Ltd, Sanford Gate, Oxford, OX4 6LB, UK
EC-REP:
Obelis S.A. Boulevard General Wahis 53, B-1030 Brussels, Belgium
Manufacturer
EAR
ROHS
Equipment name: 4 K S600, EMEET SmartCam S600
Type designation (Type): E7001
Unit| Restricted substances and its chemical symbols
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent
chromium(Crt6)| *Polybrominated
biphenyls(PBB)| Polybrominated
diphenyl ethers(PBDE)
0
| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
Note 2: “0” indicates that the percentage content of the restricted substance
does not exceed the percentage of reference value of presence.
Note 3: The “—” indicates that the restricted substance corresponds to the
exemption.
To learn more, please visit this URL
www.emeet.com
Copyright ©EMEET.
The content of this manual is subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>