BLACK LION AUDIO PG-2R Studio-Grade Regulator-Power Conditioner Owner’s Manual
- June 11, 2024
- BLACK LION AUDIO
Table of Contents
BLACK LION AUDIO PG-2R Studio-Grade Regulator-Power Conditioner
SPECIFICATIONS
| Voltage | 120VAC 15A max |
|---|---|
| AC Mains Input | Powercon Socket 15A |
| Dimensions | Width 438mm (19”) Height 88mm (2U) Depth 250mm |
| Weight | 10.52 kg (23.2 lbs) |
Note: Connect analog equipment to analog outlets and digital to digital to benefit from the optimal filtering provided by each outlet type. While this is the recommended connection method, know that no harm will come to your equipment as a result of connecting analog gear to a digital outlet or vice- versa.
Notice
This manual provides general information, preparation for use, installation and operating instructions for the Black Lion Audio PG-2R regulator/power conditioner.
The information contained in this manual is subject to change without notice. Black Lion Audio makes no warranties of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Black Lion Audio shall not be liable for errors contained herein or direct, indirect, special, incidental, or consequential damages in connection with the furnishing, performance, or use of this material.
©2023 Black Lion Audio. The Black Lion Audio ‘Lion Face’ logo, BLA, PG-2R are
trademarks or registered trademarks of Black Lion Audio.
Designed in Chicago, USA. Made in China. RAD Distribution | 180 Carpenter Ave.
Middletown, NY 10940
This manual and any associated intellectual property are subject to copyright
protection. No part of this document may be reproduced in any form without
explicit written consent from Black Lion Audio
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions
-
Heed all warnings.
-
Follow all instructions
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. If the power cord becomes frayed, stop using immediately.
-
Use only attachments/accessories specified by the manufacturer
-
Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases, shall be placed on the apparatus.
-
Note that this apparatus is not completely disconnected from the AC mains service when the power switch is in the OFF position.
-
The mains plug or power inlet on the product is used as the disconnect device, so the disconnected device shall remain readily operable when reconnected.
-
Any changes or modifications not expressly approved in this manual could void your authority to operate this apparatus.
IMPORTANT !
Be sure to use a three prong AC cable that properly fits the power source. Please use the correct fuse designated on the rear panel before plugging in the power cord. Improper selection can result in damage to the unit that will not be covered under the warranty
CAUTION!
DO NOT EXPOSE TO RAIN OR MOISTURE .NO USER SERVICEBLE PARTS INSIDE .REFER SERVICEING TO AUTHORIZED PERSONEL
The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The PG-2R is only compatible with a 15-amp circuit and is not to be used with a 20-amp circuit
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
his product complies with all international standards for safety and
emissions including IEC62368 and FCC Part 15-B.
Do not attempt to service this unit yourself, as it will void your
warranty. Please check your unit carefully upon receipt and return to place of
purchase immediately if there are any problems with the product.
After that, the standard Black Lion Audio 3 YEAR warranty will apply to
defects in materials and workmanship.
Should your Black Lion Audio product require service, please contact us on our
customer service site:
https://www.blacklionaudio.com/contact. You must obtain an RA # (Return
Authorization number) from us before shipping a unit back to us. This RA #
must be clearly written on the outside of the box.
Please safely pack the units… It is best to use the original packing materials. Black Lion Audio cannot be responsible for any damages incurred in shipping to us due to poor packaging. PLEASE PACK CAREFULLY and FULLY INSURE THE SHIPMENT.
INTERNATIONAL
For service or warranty assistance, please contact the Black Lion Audio distributor in your country through the dealer from whom you purchased this product.
LIMITED 3 YEAR WARRANTY
Black Lion Audio’s PG-2R is warranted by Black Lion Audio to be free from defects in materials and workmanship for the period of THREE (3) YEARS to the original purchaser. In the event of such defects, the product will be repaired without charge or, at our option, replaced with a new one if delivered to Black Lion Audio prepaid, together with a copy of the sales slip or other proof of purchase date. The warranty excludes problems due to normal wear, abuse, shipping damage or failure to use the product in accordance with the specifications.
All parts and labor are covered under this Limited Warranty. However, if it is determined by Black Lion Audio that the device was damaged or made defective through abuse, we reserve the right to charge the customer for the cost of the repair.
Black Lion Audio shall not be liable for damages based upon inconvenience, loss of use of the product, loss of time, interrupted operation or commercial loss or any other damages, whether incidental, consequential or otherwise. This warranty gives you specific legal rights, and you may have other rights, which will vary from state to state.
This warranty is not transferable.
QUICK START GUIDE
Once you have installed your PG-2R where you need it, connect it to an
appropriate power source. If you are not sure your source is correct, consult
with your local power company.
Plug in your equipment to the appropriate outlets on the PG-2R
Turn on the power. The digital and analog outlets are switched with a delay sequence. The digital and analog outputs turn on with the power switch and turn off after a six-second delay. The high-current outputs turn on after six seconds and turn off with the power switch. This allows any startup sequences to be finished before the high-current devices are turned on. Regulated Outputs have a tight ± 2v tolerance. Unit will fully regulate at a minimum input of 96 volts
- ON/OFF Switch: Once the PG-2R is plugged into a grounded 230VAC outlet, turning the front panel POWER switch to the ON position will sequentially power the components plugged into the rear panel outlets.
- GROUND OK: When this is on, the PG-2R is plugged into a properly grounded power source. If the LED is not on, unplug the unit from the power source and correct the fault.
- Wiring Fault: This indicates the LINE and NEUTRAL wires in the source are reversed. Unplug the unit immediately and consult an electrician to fix the fault.
- Clean Power On: This LED indicates that the PG-2R is providing clean, beautiful AC power to all connected components.
- Abnormal Voltage: When this LED blinks, the PG-2R is warning about over voltage (greater than 133 VAC.) If voltage peaks above 140 VAC or drops to 95 VAC, the PG-2R will shut down to protect connected equipment.
- Protection ON: When this LED is on, the PG-2R’s power surge circuitry is functioning correctly. If this LED is OFF, the circuit has malfunctioned. If it is OFF, unplug the unit immediately.
- Regulation ON: When this LED is on, The PG-2R’s Regulation circuit is functioning correctly and is currently regulating output voltage. If this LED is OFF, the input voltage is close enough to 120v to not require regulation.
- Digital Audio (Switched) Outlets: These outlets have a special filter circuit that is designed to reduce AC supply interference that can induce jitter in digital clocking. These outlets also isolate the rest of your system from noise generated by the digital components themselves.
- Analog Audio Filter (Switched) Outlets: These outlets have a special filter circuit that reduces audible noise in your analog components (mixers, dynamic effects, etc.)
- High Current Filter (Timed) Outlets: These outlets have a special filter circuit designed to handle high current components like power amplifiers or Active Speakers. These are the first outlets to power off and the last to power on via power sequencing, to avoid speaker pops.
- Gold-plated ground post: Provides a connection point for any ungrounded components.
- Thermal Circuit Breaker: protects the PG-2R from power overload.
- Breaker Open: When this LED is on, the thermal circuit breaker has tripped due to an overload. Before resetting the breaker, find the reason for the overload.
- Ultra-high Current AC PowerCon Socket: Connect the included five-foot PowerCon AC cable to maximize power transfer to high current components such as amplifiers. Aftermarket PowerCon cables of up to 15’ can be used.
- Front Dimmer: This know controls a flexible accessory light. Push on/off and turn clockwise for brightness.
- Front 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an accessory lamp.
- Rear Dimmer: This knob controls a flexible accessory light. Push on/off and turn clockwise for brightness.
- Rear 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an accessory lamp.
- Input Voltage Meter: Three-character LED displays the line voltage at the input source.
- 1 Regulation Stage Meter: Two-character LED displays the number of regulation stages being applied to the input voltage; ± six stages.
- Amperage Meter: Three-character LED displays the amperage used by equipment plugged into the PG-2R.
- Unswitched Convenience Outlets: These are “always-on” unfiltered, unregulated power outlets.
- USB-C Charger: 100 watt, 5 volt convenience charger for USB-C mobile devices and laptops.
- USB Charger: 5V1A convenience charger for USB devices
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>