Paslode PSN100.1 Pneumatic Framing Nailer Instructions
- June 11, 2024
- Paslode
Table of Contents
Paslode PSN100.1 Pneumatic Framing Nailer
Product Information
- Model: PSN100.1
- Nail diameter: 2.8 – 3.4 mm
- Nail length: 50 – 100 mm
- A: 380 mm
- B: 500 mm
- C: 130 mm
- Weight: 3.9 kg
- Noise level: 98.1 dBA (LWA.1s), 90.5 dBA (LpA.1s), 85.1 dBA (LpA.1s1m)
- Operating pressure: Min. 5 bar, Max. 8 bar
- Oil capacity: 0.5 l or 1 l
- Manufacturer: ITW Befestigungssysteme GmbH, 30966 Hemmingen, Germany
Product Usage
- Before using the nailer, ensure that the operating pressure is within the range of Min. 5 bar to Max. 8 bar.
- Fill the oil tank with either 0.5 l or 1 l oil as per requirement.
- Insert nails with a diameter of 2.8 – 3.4 mm and length of 50 – 100 mm into the nailer.
- Hold the nailer firmly and align the nosepiece with the surface where you want to drive the nail.
- Press the trigger to drive the nail into the surface.
- Release the trigger once the nail is driven in completely.
- Follow all safety precautions as per EN ISO11148-13 International Safety Standard while using the nailer.
- After using the nailer, switch off the power supply and store the nailer in a safe place.
DIMENSIONS
MODELS
Accessories
HOW TO USE
SETTING
MAINTENANCE
Resting position
ITW CONSTRUCTION PRODUCTS EUROPE
Code 574500 (05/2019)
www.spitpaslode.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>