SHI EM Full Series Professional Gaming Mouse Instruction Manual
- July 16, 2024
- SHI
Table of Contents
SHI EM Full Series Professional Gaming Mouse
Product Information
Specifications
- Model: EM Full Series Mouse
- Connection: 2.4GHz wireless and USB
- Compatibility: Windows 7/8/8.1/10, Mac, Android
- Cleaning: 70% isopropyl alcohol and 30% water solution recommended
Product Usage Instructions
Connection Methods:
- 2.4GHz Wireless Connection
- Unplug the USB receiver from the mouse and insert it into your computer.
- Turn on the mouse reverse switch and set it to 2.4GHz wireless mode.
- The mouse and USB receiver will pair automatically within 5 seconds.
- USB Connection:
- Connect the mouse’s USB data cable to your device with an available USB port.
System Requirements
- System Compatibility: Windows 7/8/8.1/10, Mac, Android
- Hardware Compatibility: The device requires an available USB port on the PC.
Cleaning Instructions
Use a solution of 70% isopropyl alcohol and 30% water for cleaning. Avoid
other alcohols or bleach as they may cause damage.
FAQ
-
Q: What should I do if the mouse is not pairing with the USB receiver?
- A: Make sure the USB receiver is properly inserted into the computer and the mouse is in 2.4GHz wireless mode. Try reinserting the receiver and restarting the mouse.
-
Q: Can the mouse be used with a device that doesn’t have a USB port?
- A: For devices without a USB port, consider using a USB adapter or hub to connect the mouse.
EM Full Series Mouse Instruction Manual
Connection Method
2.4GHz wireless connection
- Unplug the USB receiver at the bottom of the back of the mouse and plug it into your computer.
- Turn on the mouse reverse switch and push it up to 2.4GHz wireless mode.
- The mouse and USB receiver can be used normally for 5 seconds.
USB connection
Just connect the mouse’s USB data cable to the desired device.
System Requirements
System compatibility: Windows7/8/8.1/10/Mac/Android Hardware compatibility:
The PC has an available USB port
How to Clean Your Device
A solution of 70% isopropyl alcohol and 30% water can be used as a common
cleaning solution. Other alcohols can cause damage and bleach is not
recommended.
FCC
Information to User
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference, and ‘
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferene to radio communications, However, there is no quarantine that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help .
important: Change or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement. This
equipment complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>