CCTSCK4936791 ServersCheck Indoor Dust Particle Sensor Probe User Guide

June 5, 2024
ServersCheck

CCTSCK4936791 ServersCheck Indoor Dust Particle Sensor Probe

CCTSCK4936791-ServersCheck-Indoor-Dust-Partice-Sensor-Probe-
PRODUCT

Overview

The Particle Sensor (ENV-PARTICLE) is used in detecting particle concentration in HVAC and air quality applications. This document aims to guide the user in installing our ENV-PARTICLE in your facilities and also to provide recommendations for sensor placement. You may visit our Particle sensor page at: https://infrasensing.com/sensors/sensor_particle.asp

What you need

  • Power source (PoE or 12V DC)
  • BASE-WIRED
  • LAN cable
  • ENV-PARTICLE

Recommended placements

For air quality monitoring, the sensor should be placed:

  • Within the breathing level in the room, this is between 3-6ft or 1.5-2m from the floor.
  • At least 3ft/1m away from any obstacles, openings, and ventilations.
  • At 180 ° free of any obstruction.
  • Not being close to any pollutants that may impact its result.

CCTSCK4936791-ServersCheck-Indoor-Dust-Partice-Sensor-
Probe-1

For particle air inlet and outlet:

  • The ENV-PARTICLE is housed in a metal frame that has 2 air inlets and 1 air outlet that should remain unobstructed at all times.
  • In vertical orientation, the inlets/outlets should be facing down to avoid dust accumulation. CCTSCK4936791-ServersCheck-Indoor-Dust-Partice-Sensor-Probe-2
  • In lateral placement, the inlets should be above the outlet to avoid returning of particles to the inlets.
  • In horizontal placement, the green marked inlet should be facing the ground. CCTSCK4936791-ServersCheck-Indoor-Dust-Partice-Sensor-Probe-4

Installation

Supply power to the BASE-WIRED via PoE(power over ethernet or 12V DC adapter /BASE-PWR) Other power options include BASE-PWR-USB, ADDON-POE, ADDON-UPS.

CCTSCK4936791-ServersCheck-Indoor-Dust-Partice-Sensor-
Probe-5

Connecting the BASE-WIRED to the ENV-PARTICLE

  • Via direct LAN connection
  • Via SensorHub(EXP-8HUB) CCTSCK4936791-ServersCheck-Indoor-Dust-Partice-Sensor-Probe-7
  • Via LoRa (EXP-LWHUB and NODE-LW-1P)

You can wirelessly connect your sensor probe to the BASE-WIRED, each LoRa Hub can support up to 20 LoRa Node. The LoRa Hub’s power is supplied by the BASE- WIRED while the LoRa Node’s power can be supplied by 12/24V DC or a USB-C type.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals