ZENDURE ZDSMCM USB-C Watch Charger User Manual
- June 6, 2024
- ZENDURE
Table of Contents
**ZENDURE ZDSMCM USB-C Watch Charger User Manual
**
Product Overview
- USB-C Watch Charger
Using Instructions
- Using the detachable USB-C Watch Charger
Caution
-
Storage in a cool and dry place. Recommend storage temperature: -10℃ to 50℃; Operating temperature: 0℃ to 35℃.
-
Do not expose to moisture or submerge it in liquid
-
Do not disassemble or attempt to re-purpose or modify it inany manner.
-
Stop using and contact manufacturer if the product isexcessively hot, is emitting odor, deformed or any otherabnormalities.
-
Do not clean with harmful chemicals or detergents
-
Avoid drops, bumps, friction, and other actions that can easily damage the product.
-
Avoid strenuous vibration, impact, extrusion ontransportation, and keep the product away from intensesunlight and rain.
-
Keep it away from children under 3 years old for safety.
-
Please dispose of discarded products properly accordingto local regulations
Specifications
Model | ZDSMCM1 |
---|---|
Output | 5W |
Dimensions | 2.28 x 1.34 x 0.39inch 58 x 34 x 10mm |
Weight | USB-C Watch Charger: 0.69oz / 19.5g |
Operating Temperature | 32°F to 95°F / 0°C to 35°C |
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
IC Caution
Radio Standards Specification RSS-Gen, issue 5
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
-
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device. -
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Zendure USA Inc.
Phone: 800-219-0960 (US)
Office Hours: Mon – Fri 9:00 – 17:00 PST
Support / Contact: www.zendure.com/support
Website: www.zendure.com
FCC ID: 2AZ26-ZDSMCM1
IC ID: 23216- ZDSMCM1
® and © 2021 Zendure USA Inc. All Rights Reserved. Printed on recycled materials. MADE IN CHINA