Pericat PT-01 WiFi Projector User Manual
- June 11, 2024
- Pericat
Table of Contents
WiFi Projector User Manual
PACKING LIST
PRODUCT INTRODUCTION
NORMAL CONNECTION
SIGNAL SOURCE
IOS WIFI DISPLAY
To connect your IOS devices with the projector, you just need to finish three steps: Connect the projector to your home wifi, Connect your IOS devices to your home wifi, Open screen mirroring function of your IOS devices. Step 1: Connect the projector to your home WiFi
- Turn on the projector and Choose [Settings].
- Click [ Network Information] and [Scan] to connect your home WiFi.
Click your Home WiFi Name then press OK button to put in Password.
Step 2: Connect your ios devices to your home Wi-Fi.
Make sure the devices and projector share the same Wi-Fi.
Step 3: Open screen mirroring function of your
ios devices.
(1) Go back to the projector’s home page, click iOS Cast.
Mirror your iPhone, iPad or iPod touch
- Please connect the projector to your home router WiFi under [SETUP] menu.
- Make sure that your iOS device is connected to the same network that your projector is connected to.
(2) Open the Screen Mirroring/AirPlay function on your IOS devices, click the
projector WiFi name[ such as: NETLINK-DCAC-(icast)], waiting few seconds then
you will be able to achieve screen mirroring on your devices.
ANDROID WIFI DISPLAY
Step1: Turn on the projector and choose (Miracast).
Miracast
To connect Android Mobile/Pad Device with Projector Based on WiFi-Display
Technology
- On your Android Mobile/Pad, open the settings menu.
- Access your display settings or screen-mirroring.
- Select your Miracast receiver: mcast-58e1
Step 2: Open the Multi-Screen/Miracast/Smart View on the Android devices and
click the WiFi name [such as: mcast-58e1], waiting for a few seconds, the
connection will be successful. 
Notes:
- Please make sure your Android devices support Miracast function.
- To make the connection between your android device and the projector more stable, it’s suggested that both projector and your Android device should share the same home WiFi. When connecting the projector to home WiFi, the tips are the same as Step 1 in IOS WIFI DISPLAY.
DLAN CONNECTION
Step 1: Turn on the projector and Click [Setting], Connect the projector to
you Home WiFi. The wifi connection steps are same with iOS WiFi Connection
Step 1.
Step 2: Connect your smartphone to the same Home WiFi name.
Step 3: Click [DLAN] on the projector.
Step 4: Open your video player and click the TV icon, select the projector name such as mcast-58e1, after that the connection will be successful.
OTHER CONNECTION METHOD
BASIC OPERATION
- Focus & Keystone
- Rotate the lens to get the image in focus and have the best picture quality.
- Rotate the keystone to get horizontal projection screen.
-
Projection Modes
Notes: Press Menu button, Click Setup, find Projection to choose the projection mode per you needs.
-
Projection Distance & Size
BASIC SETTINGS
-
Bluetooth Settings
Connect your Bluetooth speaker to your projector via Bluetooth mode. Find the Bluetooth icon and click it under Setting:
Press the “Right or Left” button to turn on OR turn off
the Bluetooth mode:
Turn on the Bluetooth mode. Please Search Bluetooth to
find your Bluetooth speaker:
Find your Bluetooth device and then press OK button to
connect your Bluetooth device:
The Bluetooth icon will show up at the right corner of
Home Page after the Bluetooth is successfully connected.
-
Picture Settings
Set up contrast, brightness, color, sharpness under picture mode-user mode;
Switch color temperature to medium ,warm, user and cool to meet different usage. Warm is good for movies and cool is great for image display.
-
Sound Settings
Set up sound patterns of standard, music, movie, sports and user undersound mode;
Balance is to balance the sound of the left and right channel of the speaker.
-
Advanced Settings
Language setting is under OSD Language;
To reset the projector, choose restore factory ;
For software update, contact customer service before you update.
QUICK GUIDE TO CLEAN THE DIRT SPOT ON THE SCREEN
1. Open the Dedusting hole under the projector (you can find the screw hole
directly under the projector or tear off the label of the projector
according to product model.)| 2 . Turn on the projector and insert the cotton
swab
into the projector LCD Part.| 3. Move the cotton swab to the dirt spot part
and
wipe it gently.| 4. please use the dustless
cloth to clean the lens.
Warm Tips：
Cause of air-cooling heat dissipation system of the projector, dust may settle
onto the surfaces of LCD Screen depends on the environment.
If there have a dirty spot on the projector screen , please use the dust-free
cotton swab to clean it from the dedusting hole. Thank you!
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly
approved by Dongguan kuayue Intelligent Technology Co., LTD. may void the FCC
authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The transmitter must not be colocated or operated in conjunction with any
other antenna or transmitter. This equipment complies with the FCC RF
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a Minimum distance of 20cm
between the radiator and any part of your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>