cecotec Power Titanium 650 Fresh&Go Inox Instruction Manual

: June 11, 2024
: cecotec

Table of Contents

PARTS AND COMPONENTS
BEFORE USE
OPERATION
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
DISPOSAL OF OLD ELECTRICAL APPLIANCES
TECHNICAL SUPPORT AND WARRANTY
COPYRIGHT
Documents / Resources

Power Titanium 650 Fresh Go Inox
Single-serve blender

Instruction manual

PARTS AND COMPONENTS

Fig. 1

Lid/vacuum sealing lid x2
Bottle x2
Blades
Main body
Cooling tube x2
Grinder
Manual vacuum pump (not included)

BEFORE USE

Take the product out of the box.
Remove packaging material, stickers and labels from the soleplate.
Do not use the device if it shows visible signs of damage. In this case, contact the official Technical Support Service of Cerotic.
Wash and dry the blender and its accessories carefully before use. Then, place the blender on an even, firm and dry surface.

OPERATION

Fill the cooling tubes with water up to the mark in their surface. Put them in the freezer for 12-24 hours.
Introduce the ingredients in the bottle. Make sure the ingredients do not exceed the 600-ml mark on the surface. Close the bottle with the blade assembly and turn it upside down.
Warning
Make sure the cooling tubes are not inside the blender before starting blending. They can only be placed inside the bottle once ingredients have been processed.
Connect the device to a power supply and fit the bottle onto the main body. Press the bottle and turn it slightly clockwise to lock it into place.
Press the button on the appliance to blend the food.
Warning
Do not use the appliance for more than 1 minute without pauses and allow a 2 minute rest between uses.
Turn the bottle counterclockwise to unlock and remove it from the appliance main body.
Unscrew the blade assembly, screw the cooling tube onto the bottle’s lid and then close the bottle.
Unplug the appliance.

Warning
The appliance could block when overfilled. If this happens: turn it off, unplug it and remove pour some of its contents out. Then, try again.

Grinder

Introduce the ingredients in the grinder. Close the grinder with the blade assembly and turn it upside down.
Connect the device to a power supply and fit the grinder onto the main body. Press the grinder and turn it slightly clockwise to lock it into place.
Press the appliance button to grind the ingredients.
Turn the grinder counterclockwise to unlock it and remove it from the appliance main body.
Unscrew the blade assembly.
Unplug the appliance.

Warning
Use the grinder to pulverize or grind herbs, nuts, coffee, etc.

CLEANING AND MAINTENANCE

Do not clean the main body, the power cord or the plug with water.
Clean the main body with a soft, wet cloth and some mild detergent.
Fill half the bottle with hot water and some drops of detergent. Let the appliance run until the bottle is clean.
Clean the bottle, lid, tubes and blades with hot water and some cleaning agents. These parts can be washed in the dishwasher.
Make sure all the product parts are completely dry before reassembling them and using the device.
Do not use abrasive cleaning agents.

Warning
Do not touch the blades directly. When cleaning, use a dishcloth to wipe them in order to avoid injuries.

TECHNICAL SPECIFICATIONS

Product: Power Titanium 650 Fresh Go Inox
Product reference: 04125
Power: 400 W
Voltage and frequency: 220-240 V~, 50-60 Hz
Capacity: 0.6 L
Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help to protect the environment.

TECHNICAL SUPPORT AND WARRANTY

Cicotte shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cerotic official Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

Fig.

www.cecotec.es
Cicotte Innovations S.L.
EA02220331

Documents / Resources

| cecotec Power Titanium 650 Fresh&Go Inox [pdf] Instruction Manual
Power Titanium 650 Fresh and Go Blender, Power Titanium 650 Blender, Fresh and Go Blender, Blender, Titanium 650 Blender, Blender
---|---