SANUS 6805-002459-XXX Large Tilt Outdoor Mount Installation Guide
- June 11, 2024
- SANUS
Table of Contents
SANUS 6805-002459-XXX Large Tilt Outdoor Mount
Product Information
The Large Tilt Outdoor Mount 6805-002459-XXX is a TV mount designed for outdoor use. It has a maximum weight capacity of 27.17 inches (690mm) and is compatible with TVs up to 65 inches. The mount has a tilt range of 10 degrees down and 7 degrees up, allowing for optimal viewing angles. The mount comes fully assembled and includes a wall plate that measures 24.00 inches (609.6mm) by 16.00 inches (406.4mm) by 8.00 inches (203.2mm) and is 3.00 inches (76.2mm) thick.
Product Usage Instructions
- Choose a suitable location for the TV mount on an outdoor wall.
- Use a stud finder to locate the studs in the wall where you want to install the mount.
- Mark the location of the studs on the wall plate included with the mount.
- Drill pilot holes into the wall studs at the marked locations.
- Attach the wall plate to the wall using screws and anchors appropriate for your wall type.
- Attach the TV mounting bracket to the back of your TV using the included hardware.
- Hang the TV onto the mount by hooking the mounting bracket onto the wall plate.
- Adjust the tilt angle of the TV to your desired viewing angle using the tilt adjustment knobs on the mount.
Note : It is recommended to have two people install this mount due to its size and weight capacity. Ensure that all screws and anchors are securely fastened to prevent damage or injury.
TV INTERFACE
WALL PLATE
FULLY ASSEMBLED MOUNT
TV MOUNTED
TOP VIEW
3-D VIEW
SIDE VIEW
LARGE TILT OUTDOOR MOUNT
6805-002459-XXX
THE INFORMATION AND DESIGNS CONTAINED IN THIS DRAWING ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF LEGRAND | AV. NEITHER THIS DESIGN NOR ANY INFORMATION CONTAINED IN THIS DRAWING MAY BE REPRODUCED OR DISCLOSED TO OTHERS WITHOUT THE EXPRESS WRITTEN CONSENT OF LEGRAND | AV.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>