XPOtool 62800 Series Heavy Duty Shelving System User Manual

: June 11, 2024
: XPOtool

Table of Contents

XPOtool 62800 Series Heavy Duty Shelving System User Manual
Illustration similar, may vary depending on model’
Introduction
Safety instructions
Assembly
Parts list
Assembly steps
Important Note:
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

XPOtool 62800 Series Heavy Duty Shelving System User Manual

Illustration similar, may vary depending on model’

Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12 52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28 52249 Eschweiler Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it.
Keep these operation instructions in a safe place.

Safety instructions

The maximum capacity of 175 kg per shelf must not be
The load must be distributed regularly on the individual shelves to avoid the chipboards being
Should the guide get out of place, insert a screwdriver into the notch to bend it in opposite direction to open
The shelf system is not suitable for use in rooms with a high air humidity, as this could damage the

Attention! Never exceed the maximum admissible charge (see information on packaging or shelf). To increase the stability, it is advisable to attach the shelving system to a wall.

Assembly

After delivery, check the parts for completeness and Do not use the shelving system if it is damaged or if parts are missing.
To avoid scratched, assemble the product on a clean and level surface (e.g., a carpet).
Use a rubber mallet not to damage the coating
Always place the shelves on a horizontal and entirely level surface; otherwise, the maximum stability and capacity cannot be
Only use rawlplugs and fixing screws suitable for the individual wall and the weight of your individual shelving (Rawlplugs, screws, and wall-mounting tools are not included.)
No responsibility is assumed for damages or consequential damages caused by any improper assembly or non-compliance with the instruction
Do not damage any water or current line during assembly and