Taylor 9848FDA/806 Waterproof Digital Thermometer Instruction Manual

: June 11, 2024
: TAYLOR

Table of Contents

Taylor 9848FDA/806 Waterproof Digital Thermometer
Description of Parts
General Operation
Specifications
One-Year Limited Warranty
Taylor 9848FDA/806 Waterproof Digital Thermometer Instruction Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Taylor 9848FDA/806 Waterproof Digital Thermometer

Thank you for purchasing a Taylor® Waterproof Digital thermometer. This state- of-the-art measurement instrument is engineered and designed to meet the highest quality standards…to assure you uncompromising accuracy and consistently dependable, convenient performance. In order to optimize its function, please read this instruction manual carefully before use…and keep it handy for future reference.

Description of Parts

Battery Replacement
The thermometer operates on 1 LR44 (1.5v) battery. Change the battery when display becomes dim. To replace the battery:

Open the battery compartment by turning the battery compartment door cover on the back of the thermometer counterclockwise, using a coin in the slot.
Remove used battery and insert new one, with the “+” sign facing up.
Close the compartment. Make sure the o-ring is seated around the opening to maintain the waterproof feature. Note: If battery door is not closed properly, water can get into the battery compartment causing the unit to malfunction.

Antimicrobial Feature
Taylor’s Safe-T-Guard™ sleeve and housing incorporates a non-toxic chemical compound that inhibits the growth of harmful pathogens, which minimizes cross- contamination. It is important to thoroughly clean and disinfect your thermometer after each use.

General Operation

Sterilize the metal probe by inserting it into an appropriate solution such as boiling water for several minutes.
Turn unit on with “On/Off” button located on the dial face. Select Fahrenheit or Celsius using the button marked “ºF/ºC”. Note: To save battery life, this unit has an
AUTO-OFF feature that turns the instrument off after 10 minutes if no change in temperature has occurred.
When ready to test the temperature, insert stem at least 1″ for the most accurate reading. The LCD will stabilize when reading is complete (approximately 10 seconds).
When the digital display has been stabilized, press the “Hold” button and the temperature will be held (the letter “H” will appear). Press again to release.
Press the “Max” button to read the maximum temperature that the probe has reached (the word ‘Max’ will appear).
To Clear the Max Memory: with the word max showing on the LCD, press and hold the “Max” button for 3 seconds. The word max will turn off and the max memory will change to the current temperature.
To avoid burns near heat, snap the pocket sleeve onto the opposite end of the thermometer and use as a handle.
Be sure to sanitize the stem before inserting it into another product (See Antimicrobial Feature).

Specifications

Range of temperature measurement:

Range: – 40°F to 450°F (-40°C to 230°C)
Accuracy: 130°F to 180°F = 0.5°F (54° to 82°C = 0.5°C) ±2F or ±1°C outside of above range
Resolution: 0.1ºF or ºC up to 199.9º (above 1ºF and ºC)
Auto Shut-Off: After 10 minutes if no change in temperature
Stepdown Probe Response Time: 5 seconds, with 2-second updates
Battery: 1.5v LR44 (included)

One-Year Limited Warranty

This product is warranted against defects in materials or workmanship for one (1) year for the original purchaser from date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair.
Should this product require service (or replacement at our option) while under warranty, do not return to the retailer. Please pack the item carefully and return it prepaid, along with store receipt showing date of purchase and a note explaining the reason for return to:

Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA
www.taylorusa.com

There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Made to our exact specifications in China.
© 2008 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.