CENTEK CT-0039 Electric Kettle Instruction Manual

CT-0039 Electric Kettle
Instruction Manual

CT-0039 Electric Kettle

DEAR CUSTOMER!
Thank You for purchasing a CENTEK brand product. We guarantee flawless function of this item, provided the guidelines of its operation are observed. Should You decide to transfer the appliance to another person, please pass the present manual over along with it.
This appliance is designed for use in domestic and similar applications, in particular:
– in personnel kitchen zones at stores, offices and industrial facilities;
– at agricultural farms;
– by clients at hotels, motels and other residential facilities;
– in private boarding houses.
PURPOSE OF THE APPLIANCE:
The kettle is designed for heating and boiling drinking water.

SAFETY PRECAUTIONS

The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:

1. Carefully read the present manual prior to operating the appliance. Retain the present manual, cash voucher and appliance packaging.
2. This appliance is designed for home use. Use the appliance only for its intended purpose.
3. This appliance is not designed for commercial applications. Do not use the appliance outdoors.
4. Do not place the appliance near heat sources, do not expose it to direct sunlight and moisture (do not submerse it in water or other liquids).
5. Do not touch the appliance with wet hands. In case of ingress of moisture or leakage from the appliance immediately disconnect it from power supply.
6. Always disconnect the appliance from power supply after use and before cleaning (pull the plug, do not pull it out by the cable).
7. Do not let children play with the appliance. Do not leave the appliance unattended. Ensure that the power cable is routed in a location inaccessible for children.
8. Regularly check the appliance and its power cable for damage. Operating a damaged appliance is not allowed.
9. Do not attempt to repair the appliance yourselves, apply to certified technicians. In case of damage to the power cable have it replaced by the Manufacturer, an authorized service centre or other skilled personnel.
10. Only the use of original spare parts is allowed.
11. Special instructions for transportation (shipment) and sale: none.

SPECIAL SAFETY REQUIREMENTS
– Fill the kettle with cold water only.
– Ensure that the kettle is turned off before removing it from the base!
– Ensure that the lid is firmly closed before turning the kettle on
– Do not attempt to boil water in the kettle with the lid open, this will prevent the automatic shutdown from functioning and may cause a fire.
– Use the kettle only together with the base supplied with it.
– Do not submerse the kettle in water.
– Avoid contact of water with the surface of the kettle and the power base.
– The appliance should not be used by children, physically and mentally handicapped persons.
– The water level should be between the MAX and MIN marks! If the kettle is folled over the maximum level mark, boiling water may spill out!
– Do not attempt to boil water in the kettle with the lid open, this will prevent the automatic shutdown from functioning and may cause a fire.
– CAREFUL! Ensure that the kettle is turned off before taking it from the stand.
– Use the appliance only with the proper connector.
– CAREFUL: accessible surfaces of the appliance can reach high temperature during operation. Do not touch the hot surfaces.
– The appliance is not designed to be powered from an external timer or other separate remote control system.

APPLIANCE DESCRIPTION

1. Lid
2. Housing
3. Power base with power cord compartment
4. Lid release button
5. Touch control panel
6. Temperature display
7. White tea coking mode button
8. Green tea coking mode button
9. Oolong tea coking mode button
10. . Boiling function button
11. Temperature increase/decrease buttons
12. Warming function button
13. ON/OFF button

SCOPE OF SUPPLY

– Electric kettle ­ 1 pc.
– Kettle base ­ 1 pc.
– Operating Manual ­ 1 pc.

OPERATING PROCEDURE

• Retain all packaging materials until you make sure that the kettle operates properly.
• Ensure that the power supply grid voltage corresponds to the one indicated on the kettle’s base before operating it.
• Do not operate the unit with damaged power cable or plug.
• Before the first use boil and discard water two times. It is recommended to add some citric acid to the water for the first boiling. The kettle is designed for boiling pure water only.
• Place the kettle on a smooth level surface. Do not place the kettle at the edge of a table.
• Connect the kettle to an electric socket. Excessive power cord can be wrapped around the guides inside the base and draw its end through the cutout in its side.
• Do not let the power cord hang from a table where a child can pull on it.
• Do not place the kettle near heating appliances and hot surfaces.

KETTLE OPERATION
– Place the base on a dry, smooth horizontal plane, plug into the power supply, when the kettle is put into the base, the power supply and power switch will be automatically connected, enter the setting mode (the setting lights are all on), the buzzer will emit a «di» sound, and the display screen will display the current real temperature. (If there is no operation within 1 minute, the kettle will automatically enter the standby state, and the power button light will be converted into a breathing light)
– Press the «КИПЯЧЕНИЕ» key, and the buzzer will emit a sound of «Di», on the screen display the corresponding setting temperature 100 ⁰С, three set buttons «КИПЯЧЕ-
НИЕ», «ПОДОГРЕВ», all lights are on, the current temperature is displayed on the display screen, and water is boiled at the same time.
– After the water is boiled, the buzzer will emit a sound of «Di» and automatically enter the keep warm state. The keep warm time will be 2 hours. When the water temperature is lower than the set temperature of about 5 degree, the heating will be resumed until 2 hours.
CUSTOM OPERATIONS TEA PREPARATION MODES
CUSTOM OPERATIONS
TEA PREPARATION MODES
– In the setting interface, press the «БЕЛЫЙ» key, and the buzzer will emit a sound of «Di». The screen displays the corresponding setting temperature of 70 °C, three key «БЕЛЫЙ», «ПОДОГРЕВ», . Lights are on the current temperature is displayed on the display screen. When the water temperature reaches 70 ⁰С, the kettle automatically   enters the keep warm state. When the water temperature is about 5 degrees below the set temperature, the heating will be resumed until 2 hours.
– In the setting interface, press the «ЗЕЛЕНЫЙ» key, and the buzzer will emit a sound of «Di». The screen displays the corresponding setting temperature of 80 °C, three key «ЗЕЛЕНЫЙ», «ПОДОГРЕВ», . All lights are on the current temperature is displayed on the display screen, When the water temperature reaches 80 ⁰С, the kettle automatically enters the keep warm state. When the water temperature is about 5 degrees below the set temperature, the heating will be resumed until 2 hours.
– In the setting interface, press the «УЛУН» key, and the buzzer will emit a sound of «Di». The screen displays the corresponding setting temperature of 90 °C, three key «УЛУН», «ПОДОГРЕВ», lights are on the current temperature is displayed on the display screen, When the water temperature reaches 90 ⁰С, the kettle automatically enters the keep warm state. When the water temperature is about 5 degrees below the set temperature, the heating will be resumed until 2 hours.
– In the setting interface, press the «+» key, and the buzzer will emit a sound of «Di». The screen displays the corresponding setting temperature of 40 °C, Four key «+», «-», «ПОДОГРЕВ», . All lights are on the current temperature is displayed on the display screen, When the water temperature reaches 40 ⁰С, the kettle automatically enters the keep warm state. When the water temperature is about 5 degrees below the set temperature, the heating will be resumed until 2 hours.
(Single press «+» Key, each time increase 5 degrees, all operations same way as previous press «-» Key, each time decrease 5 degrees, Select the temperature).
NOTE: In the state of keep warm, after boiling water to the set temperature, the memory function of lifting kettle will be started. Within ten times of kettle lifting and put back , the water temperature is not less than 8 of the set value, and the memory is effective, that is, the keep warm will continue to work, and the time of keep warm will continue to the last time. Otherwise, the memory function is not valid.
IMPORTANT! Press the buttons with your thumb to increase the contact area.
BOILING MODE
In the setting interface, press the «ПОДОГРЕВ» key, then press «КИПЯЧЕНИЕ» key and the buzzer will emit a sound of «Di». The screen displays the corresponding setting temperature of 100 °C, «КИПЯЧЕНИЕ», . Two lights are on the current temperature is displayed on the display screen, and boiling water state at the same time. The heating stops when the temperature reaches 100 °С, and the buzzer emits two sounds: «Di» «Di». «КИПЯЧЕНИЕ» Button indicator light off, 30 seconds later the display on the temperature indicator light off.
HEAT MODE
– In the setting interface, press the «ПОДОГРЕВ» key, then press «БЕЛЫЙ» key and the buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 70 °C, «БЕЛЫЙ», . Two lights are on the current temperature is displayed on the display screen, and boiling water state at the same time. The heating stops when the temperature reaches 70 °С, and the buzzer emits two sounds:
«Di» «Di». «БЕЛЫЙ» Button indicator light off, 30 seconds later the display on the temperature indicator light off.
– In the setting interface, press the «ПОДОГРЕВ» key, then press «ЗЕЛЕНЫЙ» key and the buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 80 °C, «ЗЕЛЕНЫЙ», . Two lights are on the current temperature is displayed on the display screen, and boiling water state at the same time. The heating stops when the temperature reaches 80 °C, and the buzzer emits two sounds:
«Di» «Di». «ЗЕЛЕНЫЙ» Button indicator light off, 30 seconds later the display on the temperature indicator light off.
– In the setting interface, press the «ПОДОГРЕВ» key, then press «УЛУН» key and the buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 90 °C, «УЛУН», . Two lights are on the current temperature is displayed on the display screen, and boiling water state at the same time. The heating stops when the temperature reaches 90 °C, and the buzzer emits two sounds:
«Di» «Di». «УЛУН» Button indicator light off, 30 seconds later the display on the temperature indicator light off.
– In the setting interface, press the «ПОДОГРЕВ» key, then press «+» key and the buzzer will emit a sound of «Di». The screen displays the corresponding setting temperature of 40 °C, «+», «-», . Three lights are on. The current temperature is displayed on the display screen, and boiling water state at the same time. The heating stops when the temperature reaches 40 °C, and the buzzer emits two sounds:«Di» «Di». «+», «-» Button indicator light off, 30 seconds later the display on thetemperature indicator light off.
(single press «+» Key, each time increase 5 degrees till 100 °C. all operationssame way as previous ,select the temperature and stop heating when reach settemperature . and the buzzer emits two sounds: «Di» «Di». press «-» Key, each timedecrease 5 degrees Select the temperature).
NOTE: In standby state, only the power button is valid, and other buttons are invalid,and kettle under the setting state. To switch the function, press the power button againto switch to the setting interface.)
DRY OPERATION SAFETY
The kettle is equipped with a system the automatically turns it off when it is accidentally turned on without water or with an insufficient amount of water inside. If the system is tripped disconnect the kettle from power supply and let it cool down for 15 minutes.
After that you may resume operation of the appliance.
An unpleasant odor may occur if the safety is tripped.

MAINTENANCE SCALE REMOVAL

Regularly remove scale using special descaling chemicals. Follow the instructions on the packaging. You may also use a weak citric acid or vinegar solution to remove scale. Do not try to use a more concentrated solution as it may lead to corrosion and leaks from the appliance.
ATTENTION! The guarantee undertakings do not cover the damage caused by improper scale removal.
CLEANING
– Always disconnect the appliance from power supply before cleaning!
– Clean the outer surfaces of the kettle, if necessary, with a slightly dampened cloth without detergents.
– Do not submerge the kettle or base in water.
– Do not use abrasive cleaning agents and solvents to clean the kettle.

SPECIFICAIONS

– Nominal voltage: 220­240 V ~50/60 Hz
– Capacity: 1,7 l
– Nominal ower rating: 1850-2200 W
– Touch control
– 4 automatic temperature modes: 70, 80, 90, 100 0C
– Boiling function
– Memory for 13 settings
– Concealed LED display

DISPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center.
The address of the service center can be found on the website https://centek.ru/servis.
Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd.
General Service Center: OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity:
№ ЕАЭС RU C-CN.ВЕ02.В.02135/20 of 26.03.2020.

MANUFACTURER AND IMPORTER INFORMATION

Impo rted to EAEU by: Individualniy Predprinimatel Asrumyan Karo Shurikovich.
Address: Russia, 350912, Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy.
Phone: +7 (861) 2-600-900.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper
condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions are observed:
   – The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
   The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

2. The guarantee shall be valid if the following operation conditions are observed:
   – the appliance is used in strict accordance with the present manual;
   – the safety rules and requirements are observed.

3. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

4. The guarantee does not apply in the following cases:
   – mechanical damage;
   – normal wear of the appliance;
   – non-observance of operation requirements or erroneous actions on the part of the user;
   – improper installation or transportation;
   – natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
   – ingress of foreign objects, liquids or insects into the inside of the appliance;
   – repairs or modifications to the appliance by unauthorized persons;
   – use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
   – failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
   a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
   b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
   – for battery-powered appliances – operation with inappropriate or depleted batteries;
   – for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.

5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

**Warranty Certificate

**

Attention! Please ask the seller to fill out the warranty card and tear- off coupons in full.
The ticket is valid in the presence of all stamps and marks.
Product……………….
Model………………
Serial number ………………
Date of sale………………..
These tear-off coupons are filled in by a representative of the seller
Product……………
Model………………..
Serial number …………………
DATE OF SALE ……………….
Vendor,……………..
Seller’s address………………
Full name and phone number of the buyer service center
RELEASE DATE ……………
These tear-off coupons are filled in by a representative of the
TYPE OF REPAIR………………………
DATE OF RECEIPT………..

WWW.CENTEK.RU

References

• VK.com | VK
• Сервис - Официальный сайт Centek

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>